network-dat.md

• protocols-dat

• RC-dat

• rf-switches-dat

Network tech by range

Technology	Range	Data Rate	Notes
M2M-dat	Almost infinite (provider)	Varies	Limited by service provider network
lora-dat	Long, up to 10 km	Low
RF-link-dat	Medium, up to 1 km	Low
ELRS-dat	Medium, up to 1 km (5 km)	High

main category

• M2M-dat - LTE-dat - POE-dat - low-power-test-dat - M2M-interface-dat

• bluetooth-dat

• cable-dat - fiber-optic-dat- coaxial-cable-dat - POF-dat - toslink-dat

• long distance = lora-dat - lorawan-dat - rf-switch-dat

• RFID-dat - wiegand-dat

• M2M-dat - LTE-dat - LWPA-dat

• interface-dat

• radio-dat

• ethernet-dat - WIFI-DAT

internet

• network-system-dat

• WIFI-DAT - HTTP-dat - UDP-dat - MQTT-dat - TCPIP-dat

RC apps protocols

• RC-dat - RF-DAT - CRSF-dat - GFSK-dat - ardupilot-dat - SBUS-dat

• ELRS-dat - ELRS-TX-dat - ELRS-RX-dat - GFSK-dat

RC protocols - CRSF-dat - SBUS-dat

and more - IBUS-dat - PPM-dat - FPort-dat - SPEKTRUM-dat - SUMD-dat - SRXL-dat - Ghost-dat - MAVLink-dat - DroneCAN-dat

• PS2-console-dat

Software

• ardupilot-dat

• openwrt-dat

• zigbee-dat - openthread-dat - micropython-dat

RF boards

• DVA1002-dat - DVA1007-dat

• NRF24L01-dat - NWL1032-dat

M2M Boards

• NGS1131-dat - NGS1132-dat - NGS1140-dat

• NGS1063-dat

Location

• location-dat - GNSS-dat - GPS-dat - AGPS-dat

• NGS1089-datmqtt-dat

IOT

• NBIOT-dat - MQTT-dat

• zigbee-dat

Ethernet

• ethernet-dat

EtherCAT (Ethernet for Control Automation Technology) is a high-performance, real-time Ethernet-based fieldbus system. It was originally developed by Beckhoff Automation.

System and APPs

• RTU-dat - modbus-dat

info

What is DTE and DCE?

DCE = Data Circuit-terminating Equipment (also called Data Communications Equipment).

• In the context of modems, the DCE is the modem itself.
  
• It connects to a DTE (Data Terminal Equipment), which is typically your computer, microcontroller, or router.
  

Roles:

Device Type	Meaning	Example
DTE	Data Terminal Equipment — device that generates/uses data	PC, microcontroller, router
DCE	Data Circuit-terminating Equipment — device that provides a communication path	Modem, serial adapter, cellular module

• The DTE and DCE sides determine who provides clock signals, and how cables are wired (TX/RX pins).
  
• In UART serial communication, for example:
  
  • DTE sends data to DCE, which modulates/transmits it.
    
  • DCE receives data from DTE, demodulates it, and sends it to the remote device.
    

What is PPP?

PPP (Point-to-Point Protocol) is a data link layer protocol used to establish a direct connection between two network nodes.
It allows the transmission of multi-protocol datagrams (e.g., IP, IPv6, IPX) over serial links, phone lines, or other point-to-point connections.

---

2. Key Uses of PPP

• Connecting two devices over a serial link.
  
• Dial-up Internet access (historical).
  
• VPN connections (PPP over SSH or PPP over Ethernet).
  
• Cellular data connections (PPP over UART for modems).
  

Example:
A microcontroller talking to a cellular modem (SIMCom, Quectel) over UART often uses PPP to establish an IP connection.

network protocols and standards

• network-dat - xbee-dat - btbee-dat - nrf24l01-dat - CC1101-dat - sensor-dat

• zigbee-dat

• wifi-dat

• IEEE-dat

network system

• network-system-dat

unsort

• ET5171 - EMI RFI FILTER 10A ELCOM AC 115V 230V single phase ET5171

ref

• antenna-dat