RGB Matrix Panel Driver Board
- with raspberry pi - MPC1073-dat - MPC1119-dat
- with ESP32 - IDD1013-dat - IDD1016-dat
- with esp8266 - IDD1007-dat
- with arduino - DAS1087-dat
-
Mono Color Drive with ESP32 - IDD1023-dat
- with Orange Pi - MPC1123-dat
matrix panel
knowledge
Typical wiring with RPI - for MPC1073
| Connection | Pin | Pin | Connection |
|---|---|---|---|
| - | 1 | 2 | - |
| [3] G1 | 3 | 4 | - |
| [3] B1 | 5 | 6 | GND |
| strobe | 7 | 8 | [3] R1 |
| - | 9 | 10 | E (for 64 row matrix, 1:32) |
| clock | 11 | 12 | OE- |
| [1] G1 | 13 | 14 | - |
| A | 15 | 16 | B |
| - | 17 | 18 | C |
| [1] B2 | 19 | 20 | - |
| [1] G2 | 21 | 22 | D (for 32 row matrix, 1:16) |
| [1] R1 | 23 | 24 | [1] R2 |
| - | 25 | 26 | [1] B1 |
| - | 27 | 28 | - |
| [2] G1 | 29 | 30 | - |
| [2] B1 | 31 | 32 | [2] R1 |
| [2] G2 | 33 | 34 | - |
| [2] R2 | 35 | 36 | [3] G2 |
| [3] R2 | 37 | 38 | [2] B2 |
| - | 39 | 40 | [3] B2 |
corresponding pin number:
- ROW_A = 22
- ROW_B = 23
- ROW_C = 24
- ROW_D = 25
- ROW_E = GPIO 15
- OE = GPIO 18
- CLK = GPIO 17
- LAT (STROKE) = GPIO 4
- P0 R1/G1/B1 = 11 / 27 / 26
-
P0 R2/G2/B2 = 8 / 9 / 10
- P1 R1/G1/B1 = 12 / 5 / 6
-
P1 R2/G2/B2 = 19 / 13 / 20
- P2 R1/G1/B1 = 8 / 2 / 3
- P2 R2/G2/B2 = 26 / 16 / 21
ref
- reference link - https://github.com/hzeller/rpi-rgb-led-matrix/blob/a3eea997a9254b83ab2de97ae80d83588f696387/wiring.md
in development
ref
- main code repository - https://github.com/hzeller/rpi-rgb-led-matrix
-
wiring - https://github.com/hzeller/rpi-rgb-led-matrix/blob/a3eea997a9254b83ab2de97ae80d83588f696387/wiring.md?plain=1#L144
-
Teensy 3.1/3.2/3.5/3.6 or ESP32 chips (not supported by RGB-matrix-Panel), please look at https://github.com/marcmerlin/SmartMatrix_GFX which offers a GFX compatibility layer on top of https://github.com/pixelmatix/SmartMatrix
- IDD1013-dat - https://github.com/mrfaptastic/ESP32-HUB75-MatrixPanel-I2S-DMA
- IDD1007-dat - https://github.com/2dom/PxMatrix
- IDD1016-dat - https://github.com/2dom/PxMatrix