https://w.electrodragon.com/w/ESP32_RMP
Board map
- only spare pins IO10 IO9 IO38 IO37
- SEL1 pin is the SEL-PIN4 in HUB75-dat
Use guide
You will need ESP32 main controller board to stack on it. Includes:
Please make sure any of your cloned ESP32 board can match the same pin out
PxMatrix Configuration
-
#define P_LAT 22
- #define P_A 19
- #define P_B 23
- #define P_C 18
- #define P_D 5
- #define P_E 15
Notice to set for ESP32-DEVKITC or ESP32-DEVKITC accordingly, as below:
For ESP32-DEVKITC
- #define P_OE 16
For ESP32-PICO
- #define P_OE 12
The rest fixed used pin
- CLK = 14
- R1 = 13
detailed wiring please refer to pxmatrix code
demo code
- Github code https://github.com/2dom/PxMatrix
- work with default demo code above
- demo code available at arduino-ide-dat or link (if link broke please search): https://github.com/Edragon/Arduino-ESP32/tree/master/IDD/IDD1016
demo video
- PxMatrix Demo video - https://t.me/electrodragon3/20
- ESP32 with IDD1016-dat based on code PxMatrix - https://t.me/electrodragon3/41
- more 1 - https://t.me/electrodragon3/146