raspberry pi dat

• RPI-MCU-dat - RPI-SBC-dat

• RPI-dat - RPI-SBC-dat - RPI-LCD-dat

• RPI-CM4-dat - RPI-CM4-expansion-board-dat

• RPI-SDK-dat - RPI-HDK-dat

• RPI3-dat - RPI4-dat

• RPI-zero-dat - RPI-zero-w-dat - RPI-zero-2w-dat

• official documentation - https://www.raspberrypi.com/documentation/

• RMP-driver-dat

hardware

• raspberry-pi-dat - interface-dat - serial-dat

• 3D-dat

boards

• MPC1033-dat

• MPC1073-dat - MPC1120-dat

power delivery

In summary, the Raspberry Pi 3 can deliver a maximum of 50 mA to 150 mA from the 3.3V GPIO pins, but care should be taken not to exceed the individual pin limit of 16 mA for each GPIO pin. Always ensure that the total current drawn does not exceed the recommended limits to avoid damaging the board.

3.3V power delivery

All Raspberry Pi since the Model B+ can provide quite a bit more, up to 500mA to remain on the safe side, thanks to a switching regulator.

• ref - https://pinout.xyz/pinout/pin1_3v3_power/#:~:text=The%203v3%20supply%20pin%20on,regulator%20for%203.3v%20projects.

I2C

• turn on I2C functions at raspi-config

ref

• SBC-dat

• RPI - RPI-SBC

• win10-dat - OS-dat