ESP32-WROOM-DAT

https://www.electrodragon.com/product/wroom-32/

Version compare 32E / 32D / 32U

32D

32E

The ESP32-WROOM-32E and ESP32-WROOM-32D are both modules based on the ESP32 system-on-a-chip (SoC) by Espressif Systems. They are very similar in terms of features and capabilities but have a few key differences.

The main difference between the ESP32-WROOM-32E and ESP32-WROOM-32D lies in their RF (Radio Frequency) performance.

The ESP32-WROOM-32E offers improved RF performance compared to the ESP32-WROOM-32D. It provides better sensitivity, range, and signal stability, making it suitable for applications requiring reliable wireless communication.

If you are looking for more detailed technical specifications and information about the ESP32-WROOM-32E and ESP32-WROOM-32D, you can refer to the official Espressif documentation: https://www.espressif.com/en/support/documents/technical-documents

The E is the latest WROOM version, using the new V3 silicon. It is a direct upgrade to the 32D that fixes some bugs.

If you're buying new, get the 32E and consider the 32D obsolete. If you're already using 32D, it's going to be functionally identical in every way that likely matters to you so don't worry about it. (ie. It's not worth 'upgrading' to the E unless there is a specific issue you're facing.) See this guide for more info: https://www.espressif.com/sites/default/files/documentation/ESP32_ECO_V3_User_Guide__EN.pdf

32U

ESP32-WROOM-32U is different from ESP32-WROOM-32D in that ESP32-WROOM-32U integrates a connector to connect an external antenna.

Module List

version Flash Suffix SKU Antenna Note
ESP32-WROOM-32 4MB = 32Mb NWI1110-dat PCB end
ESP32-WROOM-32D-N4 4MB = 32Mb N4 NWI1155-dat PCB  
ESP32-WROOM-32D-N8 8MB = 64Mb N8 NWI1194-dat PCB  
ESP32-WROOM-32D-N16 16MB = 128Mb N16 NWI1195-dat PCB  
ESP32-WROOM-32U-N4 4MB = 32Mb N4 NWI1157-dat Ipex  
ESP32-WROOM-32U-N8 8MB = 64Mb N8 NWI1196-dat Ipex  
ESP32-WROOM-32U-N16 16MB = 128Mb N16 NWI1197-DAT Ipex  
  • ESP-WROOM-32D/U are compatible with former ESP-WROOM-32, pin-to-pin compatible.

Functions

Module interfaces

  • SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM,
  • I2S, IR, pulse counter, GPIO, capacitive touch sensor, ADC,
  • DAC, Two-Wire Automotive Interface (TWAI®), compatible
  • with ISO11898-1 (CAN Specification 2.0)
  • Integrated crystal 40 MHz crystal
  • Integrated SPI flash 4 MB

SCH

Pin Definitions

ESP32-WROOM-32D

ESP32-WROOM-32

Legacy Wiki Pages

  • https://w.electrodragon.com/w/Category:ESP32

  • ESP32-dat

Datasheet

obseleted

updates

Based Design

ref

forum - http://esp32.net/