DC-dat - dcdc-dat - dcdc-down-dat - dcdc-boost-dat - charge-pump-dat - dcdc-boost-down-dat - constant-current-dat - CV&CC-dat
supervisory-dat - power-switch-dat - voltage-reference-dat - voltage-interverter-dat - power-detector-dat - power-amplifier-dat
Info
Power selection
By switching from 5V to 3.3V, you can achieve up to 34% power savings in circuits where the current remains the same. In practice, the actual savings may be higher because some components draw less current at lower voltages.
power tree for D1-H

Integrated PDB (Power Distribution Board)
An Integrated PDB is a circuit board built into a drone’s flight controller or frame that distributes power from the battery to all electronic components, such as:
- ESCs (Electronic Speed Controllers)
- Motors
- Flight Controller (FC)
- Video Transmitter (VTX)
- LEDs and other accessories
other chips
LM3880 == LM3880 Three-Rail Simple Power Supply Sequencer
Sink and Source DDR Termination Regulator
- ti-power-dat == TPS51200DRC - TPS51200 Sink and Source DDR Termination Regulator - The TPS51200 device is a sink and source double data rate (DDR) termination regulator specifically designed for low input voltage, low-cost, low-noise systems where space is a key consideration.
Power Supply Sequencer
LM3880-Q1 Three-Rail Simple Power Supply Sequencer
The LM3880-Q1 simple power supply sequencer offers the easiest method to control powerup sequencing and powerdown sequencing of multiple Independent voltage rails. By staggering the startup sequence, it is possible to avoid latch conditions or large in-rush currents that can affect the reliability of the system.
transfomer driver
- TI-power-dat SN6501DBVT - Low-noise, 350-mA, 410-kHz transformer driver for isolated power supplies
other power chips
MT9700
80 mΩ, Adjustable Fast Response
Current-Limited Power-Distribution Switch
The MT9700 is a cost-effective, low voltage,single P-MOSFET load switch,optimized for self-poweredand bus-powered Universal Serial Bus (USB)applications. This switch operates with inputs ranging from 2.4V to 5.5V, making it ideal for both 3V and 5V systems.
The switch's low Rpson.80mQ ,meets USB voltage drop requirements. The MT9700 is also protected from thermal overload which limits power dissipation and junction temperatures.
Current limit threshold programmed with a resistor from SET to ground. The quiescent supply current is typically 15pA at switch on state.
At switch off state the supply current decreases to less than 1μA.The MT9700 is available in S0T23-5 package.
ME1502
70mΩ, 5V USB 高侧可调门限限流负载开关
ME1502 是一款适用于5V应用的可调限流门限的USB接口输出保护芯片。芯片内部集成了过流保护、短路保护、过温保护、欠压保护等功能,在输出发生过流、短路或带大电容负载启动等情况时可以限制电流输出从而保护前级电源。
ME1502 70mΩ, 5V USB High-Side Adjustable Threshold Current Limit Load Switch