radiomaster-pocket-dat.md
version pocket
all buttons
Default Stick Assignments
RC template
| Input | Type | default | modify |
|---|---|---|---|
| CH1 | Stick | Roll | |
| CH2 | Stick | Pitch | |
| CH3 | Stick | Yaw | |
| CH4 | Stick | Throttle | |
| SA | 2-pos | Arm/Aux | |
| SB | 3-pos | Mode/Aux | |
| SC | 3-pos | Mode/Aux | |
| SD | Self-lock | Aux | |
| SE | Momentary | Beep/Aux | |
| S1 | Knob | Trim/Aux |
| Channel | Function |
|---|---|
| CH1 | Roll (Aileron) |
| CH2 | Pitch (Elevator) |
| CH3 | Yaw (Rudder) |
| CH4 | Throttle |
| Switch / Knob | Type | Typical Use |
|---|---|---|
| SA | 2-position switch | Arming, auxiliary control |
| SB | 3-position switch | Flight modes, auxiliary control |
| SC | 3-position switch | Flight modes, auxiliary control |
| SD | 2-position self-locking switch | Auxiliary function |
| SE | Momentary (spring-loaded) | Beeper, auxiliary function |
| S1 | Rotary potentiometer | Auxiliary function, trims |
1. Radiomaster Pocket (Multi-Protocol Version)
- Uses CC2500 module, same chip used in FrSky radios.
- Supports FrSky D8, D16, Futaba SFHSS, Hubsan, and many more protocols.
- ✅ You can bind directly to FrSky D8 receivers.
2. Radiomaster Pocket (ELRS Version)
- Uses ExpressLRS only.
- ❌ Does NOT support FrSky D8/D16.
- You would need to use an external CC2500 module if you want D8.