DC-motor-DAT
Small Brushed DC Motor Series
| Motor Series | Size (approx.) | Voltage Range | Typical Power | Common Use |
|---|---|---|---|---|
| N20 | 10 × 12 × 15 mm | 3V – 12V | <1 W | Micro robots, locks, cameras |
| 030 | ~15 mm length | 1.5V – 3V | <0.5 W | Tiny toys, fans |
| 130 | ~20 mm length | 1.5V – 6V | ~1–3 W | Toys, vibrators, mini fans |
| 180 | ~25 mm length | 1.5V – 6V | ~2–4 W | Small models, RC cars |
| 230 | ~30 mm length | 6V – 12V | ~5–20 W | Toys, small tools, RC models |
| 260 | ~32 mm length | 6V – 12V | ~10–25 W | Slot cars, drills, small pumps |
| 280 | ~35 mm length | 6V – 18V | ~15–30 W | Toys, CD drives, robotics |
| 360/365 | ~40 mm length | 6V – 18V | ~20–50 W | Hobby tools, gearboxes |
| 380 | ~45 mm length | 6V – 18V | ~20–60 W | RC cars, fans |
| 390 | ~48 mm length | 6V – 24V | ~30–70 W | Motors with higher torque |
| 540 | ~55 mm length | 6V – 24V | ~50–150 W | RC cars, robots, small drills |
| 550 | ~60 mm length | 6V – 24V | ~75–200 W | Power tools, gearboxes |
| 775 | ~70 mm length | 12V – 24V | ~150–350 W | High-power drills, CNC, mobility projects |
| 895 | ~80 mm length | 12V – 36V | ~200–500 W | High torque, heavy loads |
- more powerful motors - BLDC-motor-da[[DC-Gear-Motor-datdat]]
📊 Size Comparison Table
| Motor Name | Diameter (mm) | Length (mm) | Power Level | Common Use |
|---|---|---|---|---|
| 130 | ~15.5 | ~20 | Small / Light-duty | Toys, small fans |
| 230 | ~24 | ~30 | Medium | DIY cars, small robots |
| 260 | ~24 | ~36 | Medium-High | Hobby motors, gear motors |
| 280 | ~24 | ~45 | High | RC cars, small drills |
| 380 | ~28 | ~50–60 | Very High | Power tools, electric screwdrivers |
| 540 | ~36 | ~50 | Ultra High | RC racing cars, e-bikes |
130 Motor Overview
The 130 motor is a type of DC motor commonly used in toys, small appliances, and DIY electronics projects.
🔧 Type
- Type: Permanent Magnet Brushed DC Motor
- Category: Small-size DC Motor
⚙️ Specifications (Typical)
- Voltage Range: 1.5V – 6V (Commonly 3V or 5V) ??? try up to 7V
- High RPM: Often from a few thousand to over 10,000 RPM
- Low Torque: Suitable for light-load applications
- Brush Type: Brushed (uses carbon brushes and a commutator)
230 Motor Overview
The 230 motor is a small DC motor, similar in design to the 130 motor but typically larger in size and power.
🔧 Type
- Type: Permanent Magnet Brushed DC Motor
- Category: Medium-size DC Motor
⚙️ Specifications (Typical)
- Voltage Range: Often 3V – 12V
- Higher Torque and Power than 130 motor
- Medium RPM (usually lower than 130 motor, but stronger)
- Brush Type: Brushed (uses carbon brushes)
Why Is It Called a "230 Motor"?
The name "230 motor" comes from an informal naming convention based on the size of the motor case, not the voltage or power.
📐 Meaning of "230"
- "2" = Series or form factor group
- "30" = Approximate length of the motor case in millimeters (~30 mm)
So, a 230 motor typically has:
- Diameter: ~24 mm
- Length: ~30 mm
895 motor drive
🔧 Basic Requirements to Drive an 895 Motor
| Item | Purpose | Example |
|---|---|---|
| Power Supply | Feeds the motor with appropriate voltage/current | 12V–36V DC, 10–30A depending on load |
| Motor Driver / Controller | Controls speed and direction | H-Bridge (e.g., BTS7960, VNH2SP30), PWM controller |
| PWM Signal (optional) | Varies motor speed via duty cycle | From Arduino, Raspberry Pi, or ESC |
| Heat Dissipation | Prevents overheating during operation | Heatsinks, cooling fans |
🔄 3. 1000W+ Brushed DC Motors – ✅ Direct power jump
| Motor | Voltage | Power | Notes |
|---|---|---|---|
| MY1020 | 24–48V | 500–1000W | E-scooters, carts, heavy DIY use |
| XYD-16/13 | 36–60V | 1000W+ | High torque, brushed, affordable |
