AVR firmware - https://github.com/Edragon/AVR_firmware/tree/master/avrdude

Version

  • avrdudess

examples

  • Arduino as ISP (UNO) = programmer
  • target customized board atmega328p
  • ersult efuse FD, high fuse DA, low fuse FF

test:

D:\avr-gcc\bin>avrdude -c avrisp -p m328p -P com4 -b 19200
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.04s
avrdude: Device signature = 0x1e950f (probably m328p)
avrdude: safemode: Fuses OK (E:FD, H:DA, L:FF)
avrdude done.  Thank you.

AVRDUDE + Arduino-ISP

find version

D:\Git-code\arduino\arduino-1.8.12-windows\arduino-1.8.12\hardware\tools\avr\bin>avrdude -v -CD:\Git-code\arduino\arduino-1.8.12-windows\arduino-1.8.12\hardware\tools\avr\etc\avrdude.conf
avrdude -v -CD:\Git-code\arduino\arduino-1.8.12-windows\arduino-1.8.12\hardware\tools\avr\etc\avrdude.conf

PROG

D:\Git-code\arduino\arduino-1.8.12-windows\arduino-1.8.12\hardware\tools\avr\bin>avrdude -CD:\Git-code\arduino\arduino-1.8.12-windows\arduino-1.8.12\hardware\tools\avr\etc\avrdude.conf -c avrisp -p m328p -P com4 -b 19200
avrdude -CD:\Git-code\arduino\arduino-1.8.12-windows\arduino-1.8.12\hardware\tools\avr\etc\avrdude.conf -c avrisp -p m328p -P com4 -b 19200

CMD1

avrdude -CD:\Git-code\arduino\arduino-1.8.12-windows\arduino-1.8.12\hardware\tools\avr\etc\avrdude.conf -c avrisp -p m328p -P com4 -b 19200

CMD2

avrdude -CD:\Git-code\arduino\arduino-1.8.12-windows\arduino-1.8.12\hardware\tools\avr\etc\avrdude.conf -c arduino -p atmega328p -P com4 -b 19200

CMD3

avrdude -CD:\Git-code\arduino\arduino-1.8.12-windows\arduino-1.8.12\hardware\tools\avr\etc\avrdude.conf -c arduino -p m328p -P com4 -b 19200

avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.04s
avrdude: Device signature = 0x1e950f (probably m328p)
avrdude: safemode: Fuses OK (E:FD, H:DA, L:FF)
avrdude done.  Thank you.

AVRDUDE + USBASP, get start within arduino IDE

avrdude locate

  • D:\arduino-1.8.19-windows\arduino-1.8.19\hardware\tools\avr\bin
  • cd D:\Git-code\arduino\arduino-1.8.12-windows\arduino-1.8.12\hardware\tools\avr\bin

conf file locate

  • D:\arduino-1.8.19-windows\arduino-1.8.19\hardware\tools\avr\etc

bootloader file locate

  • D:\arduino-1.8.19-windows\arduino-1.8.19\hardware\arduino\avr\bootloaders\optiboot\optiboot_atmega328.hex

running with conf file

avrdude -C D:\avrdude.conf -c jtag2updi -P com285 -p avr128db64

based on cmd-dat varilables

%ad% -C %conf% -c USBASP -P USB -p atmega328p

Read Chip using conf file

avrdude -CD:\Git-code\arduino\arduino-1.8.12-windows\arduino-1.8.12\hardware\tools\avr\etc\avrdude.conf -c usbasp -p m328p -b 19200

avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.02s

avrdude: Device signature = 0x1e9489 (probably m16u2)
avrdude: Expected signature for ATmega328P is 1E 95 0F
        Double check chip, or use -F to override this check.

avrdude done.  Thank you.

Correctly Read ATMEGA328P

Reading | ################################################## | 100% 0.02s

avrdude: Device signature = 0x1e950f (probably m328p) 

avrdude: safemode: Fuses OK (E:FD, H:DE, L:FF)

avrdude done.  Thank you.

Flash bootloader for Arduino UNO

avrdude -CD:\Git-code\arduino\arduino-1.8.12-windows\arduino-1.8.12\hardware\tools\avr\etc\avrdude.conf -c usbasp -p m328p -b 19200 -U flash:w:"D:\Git-code\arduino\arduino-1.8.12-windows\arduino-1.8.12\hardware\arduino\avr\bootloaders\optiboot\optiboot_atmega328.hex":a

set "bl=D:\arduino-1.8.19-windows\arduino-1.8.19\hardware\arduino\avr\bootloaders\optiboot\optiboot_atmega328.hex"

%ad% -C %conf% -c USBASP -p m328p -b 19200 -U flash:w:"%bl%":a

%ad% -C %conf% -c USBASP -p m328p -b 19200 -U flash:w:"%bl%":i -U efuse:w:0xFD:m -U hfuse:w:0xDE:m -U lfuse:w:0xFF:m

full commands by arduino IDE, this will be failed if use alone

C:\Users\Administrator\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino17/bin/avrdude -CC:\Users\Administrator\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino17/etc/avrdude.conf -v -patmega328p -cusbasp -Pusb -Uflash:w:D:\arduino-1.8.19-windows\arduino-1.8.19\hardware\arduino\avr/bootloaders/optiboot/optiboot_atmega328.hex:i -Ulock:w:0x0F:m 

C:\Users\Administrator\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino17/bin/avrdude -CC:\Users\Administrator\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino17/etc/avrdude.conf -v -patmega328p -cusbasp -Pusb -Uflash:w:D:\arduino-1.8.19-windows\arduino-1.8.19\hardware\arduino\avr/bootloaders/optiboot/optiboot_atmega328.hex:i -Ulock:w:0x0F:m

Supported List

  • Commands: avrdude -p ?

ref

Table of Contents