SCM1030-dat

Info

ESP32-CAM WiFi + Bluetooth Camera Module Development Board ESP32 With Camera Module OV2640

Features:

  • Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
  • Low-power dual-core 32-bit CPU for application processors
  • Up to 240MHz, up to 600 DMIPS
  • Built-in 520 KB SRAM, external 4M PSRAM
  • Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
  • Support OV2640 and OV7670 cameras with built-in flash
  • Support for images WiFI upload -Support TF card
  • Support multiple sleep modes
  • Embedded Lwip and FreeRTOS
  • Support STA/AP/STA+AP working mode
  • Support Smart Config/AirKiss One-click distribution network
  • Support for serial local upgrade and remote firmware upgrade (FOTA)

Description:

The ESP32-CAM has a very competitive small-size camera module that can operate independently as a minimum system, measuring only 2740.54.5mm, with deep sleep current and a minimum of 6mA. ESP-32CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications. ESP-32CAM is packaged in DIP and can be directly plugged into the backplane for quick production. It provides customers with a highly reliable connection method and is convenient for use in various IoT hardware terminals.

SDK

default serial demo

Initializing the camera module...Ok!
Initializing the MicroSD card module... Starting SD Card
Picture file name: /picture0.jpg
Saved file to path: /picture0.jpg

Setup with official codes

  • CAM-dat - OV2640-dat

    #elif defined(CAMERA_MODEL_AI_THINKER) #define PWDN_GPIO_NUM 32 #define RESET_GPIO_NUM -1 #define XCLK_GPIO_NUM 0 #define SIOD_GPIO_NUM 26 #define SIOC_GPIO_NUM 27

    #define Y9_GPIO_NUM 35 #define Y8_GPIO_NUM 34 #define Y7_GPIO_NUM 39 #define Y6_GPIO_NUM 36 #define Y5_GPIO_NUM 21 #define Y4_GPIO_NUM 19 #define Y3_GPIO_NUM 18 #define Y2_GPIO_NUM 5 #define VSYNC_GPIO_NUM 25 #define HREF_GPIO_NUM 23 #define PCLK_GPIO_NUM 22

    // 4 for flash led or 33 for normal led #define LED_GPIO_NUM 4

HDK

SCH

Pin Definitions

LEDs - LED-dat

LEDs pin
flashing LED 4
common indicator 33

to get free pins, remove card in SD-dat

ref

Table of Contents