DPR1150 DAT
https://www.electrodragon.com/product/wireless-debugger-usb-ttl-cmsis-dap/
guide
Sender
- Server Side please connect to your PC USB port for data sending
Receiver
- Power only for target receiver side, USB port Type-C
Actions
- wait for both side on-module LED turn ON Blue
- and it is ready to use
sender
flash by dev board - NWI1070-dat
receiver
Pin Definitions
Left Out | Left ESP Pin | Right ESP Pin | Right Out |
---|---|---|---|
GND | GND | NGND | NGND |
DIO | GPIO 5 | RST | GPIO 12 |
CLK | GPIO 4 | RX | RX |
3V3 | 3V3 | TX | TX |
5V | 5V | GPIO 0 | Flash |
Demos
- https://twitter.com/electro_phoenix/status/1640668945953996803
ref
-
firmware - https://github.com/Edragon/ESP8266-proj