DAS1016-dat.md
Info
product url - Wireless NRF24 Controlled Relays Arduino Shield
Board Map, Dimension, Pins, chip info, Use Guide, Setup Jumper, etc.
SCH
Applications, category, tags, etc.
Demo Code and Video
The demo code is test the module RF, BTBee and Relay part. And the code base on the NRF24L01-dat, you need change the pin define as below. If you test the Bluetooth Bee interface, you need used other Bluetooth device paired with BTBee.
Here we used a Android phone with our bluetooth-dat as client to paired with BTbee(HC-o6).
#include "API.h"
//---------------------------------------------
#define TX_ADR_WIDTH 5
// 5 unsigned chars TX(RX) address width
#define TX_PLOAD_WIDTH 1
// 20 unsigned chars TX payload
//---------------------------------------------
#define CE 9
// CE_BIT: Digital Input Chip Enable Activates RX or TX mode
#define CSN 10
// CSN BIT: Digital Input SPI Chip Select
#define SCK 13
// SCK BIT: Digital Input SPI Clock
#define MOSI 11
// MOSI BIT: Digital Input SPI Slave Data Input
#define MISO 12
// MISO BIT: Digital Output SPI Slave Data Output, with tri-state option
#define IRQ 8
// IRQ BIT: Digital Output Maskable interrupt pin
//*********************************************
#endif