fab-PCB-dat
- legacy wiki page - https://w.electrodragon.com/w/Category:PCB
PCB production design
output PCB file
Order self-Check List
- layer: 1, 2, 4, 6, 8
- Output Type: Single, Continious(As file), Countinious (By our engineer)
- Size: ? x ? mm
- Quantity: ? pcs
- Technic Edge (If single, or penalized by us) : ? mm, up/bottom, left/right, all, none
- Penalize Rules (If penalized by us): ? x ? pcs
- Thickness: 0.6, 0.8, 1.0, 1.2, 1.6, 2.0 (+100), 2.5 (N/A now)
- Copper Thickness: 1oz, 2oz
- Min. Trace Width/Spacing: 6/6 mil, 5/5 mil (+15), 4/4 mil (+65), 3/3 mil (N/A now)
- Min. Drill: 0.3 mm, 0.25 mm (+30), 0.2 mm (+30),
- Stop Mask Color: Green, Blue, Red, Yellow, Black, Near-Black, White
- Character Color: White, Black
- Stop-mask Cover: Vias covered, Vias not covered, If gerber files defined then follow gerber!
- Solder Pads Plate: Lead, Lead Free (+30), Gold Plated (+100)
- Test Numbers: 0,
- Test Method: Sample Free,
- Half-hole: None Default, Yes
- Impedence: None Default, Yes
FAQ
Stop Mask on the Vias?
Yes, stop mask will cover the vias, but not the pads, please be aware on this point.
What is dimension requirement of Drilling?
- Drilling as not padding diameter range from 0.3 mm to infinity
- Drilling as pads diameter range from 0.3 mm to 6mm
- Drill shape doesn't not support rectangular, most of other shape are no problem.
-
What is the price for different board thickness?
For 0.8 - 1.6 mm thickness board, the price is default, without this arrange there will be an extra charge.
What is the price for board over size 10*10 CM
Please contact us to get a quote.
What is lead time of this service
For 55 cm and 1010 cm sample PCBs, the lead time is 4-6 days that not including Sunday. For more than 50pcs 10*10 cm batch or similar to that, we will have 2-3 days extra for production.
== PCB Production Cost List ==