Board-dat/SCU/SCU1073-dat/SCU1073-dat.md
... ...
@@ -4,12 +4,21 @@
4 4
5 5
- level safety protection
6 6
7
+- watch the demo video, pay attention to the pad side direction
8
+
9
+
7 10
## Danger!
8 11
9 12
The water level monitoring feet are not resistant to high pressure and there is no risk when placed in the water normally.
10 13
Do not directly contact the water level monitoring pin with high-voltage circuit parts such as the atomizer sheet.
11 14
12
-## Pin definitions
15
+
16
+
17
+
18
+
19
+
20
+
21
+## Pin definitions (for the chip only )
13 22
14 23
Vws = Withstand voltage value (V)
15 24
... ...
@@ -35,6 +44,12 @@ Vws = Withstand voltage value (V)
35 44
- The frequency error of the chip mainly comes from the oscillation resistor, so try to use a resistor with a precision of 1% to reduce the frequency deviation.
36 45
- And when laying out the board, the oscillation resistors should be laid out strictly according to the anti-interference drawing method. The resistors should be placed as close to the pins of the chip as possible to reduce the resistance brought by the PCB board and the frequency changes caused by environmental interference.
37 46
47
+
48
+
49
+## demo video
50
+
51
+https://t.me/electrodragon3/415
52
+
38 53
## ref
39 54
40 55
- [[SCU1073]]
Tech-dat/Sensor-dat/sensor-temp-hum-dat/sensor-humidity-dat/sensor-humidity-dat.md
... ...
@@ -5,10 +5,10 @@
5 5
6 6
- [[SHT4x-dat]]
7 7
8
-- [[sensirion-dat]]
9
-
8
+- [[sensirion-dat]] - [[aosong-dat]]
10 9
11 10
11
+- [[acturator-dat]]
12 12
13 13
## ref
14 14
Tech-dat/acturator-dat/Humidifier-dat/Humidifier-dat.md
... ...
@@ -0,0 +1,5 @@
1
+
2
+# Humidifier-dat
3
+
4
+
5
+- [[SCU1073-dat]]
... ...
\ No newline at end of file
Tech-dat/acturator-dat/acturator-dat.md
... ...
@@ -27,6 +27,8 @@
27 27
28 28
- [[thermal-printer-dat]]
29 29
30
+- [[Humidifier-dat]]
31
+
30 32
## Boards
31 33
32 34
- [[SCU1080-dat]] - [[SCU1030-dat]]