Chip-cn-dat/Fuman-dat/Fuman-dat.md
... ...
@@ -5,6 +5,7 @@
5 5
6 6
- [[FM5088SS-dat]] - [[fuman-dat]] - [[battery-protector-1s-dat]]
7 7
8
+- [[XPD318-dat]] - [[fuman-dat]]
8 9
9 10
## mosfet
10 11
Chip-cn-dat/Fuman-dat/XPD318-dat/2026-06-03-02-54-06.png
... ...
Binary files /dev/null and b/Chip-cn-dat/Fuman-dat/XPD318-dat/2026-06-03-02-54-06.png differ
Chip-cn-dat/Fuman-dat/XPD318-dat/XPD318-dat.md
... ...
@@ -0,0 +1,37 @@
1
+
2
+
3
+# XPD318-dat
4
+
5
+USB Type-C PD Multi-protocol Controller
6
+
7
+## Overview
8
+XPD318 is a highly integrated USB Type-C and USB Power Delivery (PD 3.0) port controller that also supports PPS, QC3.0+/QC3.0/QC2.0, Huawei FCP/SCP, Samsung AFC, OPPO VOOC 2.0, BC1.2 DCP, and Apple 2.4A charging specifications. It provides a cost-effective USB Type-C port charging solution for AC-DC adapters, car chargers, and other devices. XPD318's built-in Type-C protocol supports automatic wake-up upon device insertion, intelligently identifies plug orientation, and establishes a connection. The integrated PD protocol supports Bi-phase Mark Coding (BMC), including hardware physical layer and protocol engine, requiring no software for encoding and decoding.
9
+
10
+XPD318 supports up to 36W output power. The broadcast PDO voltage can be configured as 5V/9V/12V, and APDO voltage ranges of 5V Prog and 9V Prog can be configured. Through a current source that can sink/source, XPD318 connects to the feedback pin of AC-DC or DC-DC to achieve dynamic voltage regulation. It features VIN under-voltage protection, and DP/DM and CC1/CC2 over-voltage protection. XPD318 is available in a SOP8 package.
11
+
12
+## Features
13
+- Supports USB Type-C protocol: Configured as DFP (Source)
14
+ - Broadcast 3A current
15
+- Supports USB Power Delivery (PD 3.0) and PPS protocols: Integrated complete PD layered communication protocol
16
+- PDO configurable: 5V, 9V, 12V
17
+- Output power up to 36W
18
+- APDO configurable: 5V Prog, 9V Prog
19
+- Supports Quick Charge 2.0/3.0/3.0+ protocols
20
+- Supports Huawei FCP/SCP protocols / Supports OPPO VOOC 2.0 protocol
21
+- Supports Samsung AFC protocol
22
+- Supports USB BC1.2 DCP / Supports Apple 2.4A charging specification
23
+- ESD characteristic ±4KV
24
+- Safety: Under-voltage protection / CC1/CC2/DP/DM over-voltage protection
25
+- SOP8 package
26
+
27
+## Applications
28
+- AC-DC adapters
29
+- USB charging devices
30
+
31
+![](2026-06-03-02-54-06.png)
32
+
33
+
34
+
35
+
36
+## ref
37
+
Chip-cn-dat/Fuman-dat/XPM52C-dat/2026-06-03-02-56-37.png
... ...
Binary files /dev/null and b/Chip-cn-dat/Fuman-dat/XPM52C-dat/2026-06-03-02-56-37.png differ
Chip-cn-dat/Fuman-dat/XPM52C-dat/2026-06-03-02-56-51.png
... ...
Binary files /dev/null and b/Chip-cn-dat/Fuman-dat/XPM52C-dat/2026-06-03-02-56-51.png differ
Chip-cn-dat/Fuman-dat/XPM52C-dat/2026-06-03-02-57-14.png
... ...
Binary files /dev/null and b/Chip-cn-dat/Fuman-dat/XPM52C-dat/2026-06-03-02-57-14.png differ
Chip-cn-dat/Fuman-dat/XPM52C-dat/2026-06-03-02-59-09.png
... ...
Binary files /dev/null and b/Chip-cn-dat/Fuman-dat/XPM52C-dat/2026-06-03-02-59-09.png differ
Chip-cn-dat/Fuman-dat/XPM52C-dat/2026-06-03-03-00-06.png
... ...
Binary files /dev/null and b/Chip-cn-dat/Fuman-dat/XPM52C-dat/2026-06-03-03-00-06.png differ
Chip-cn-dat/Fuman-dat/XPM52C-dat/XPM52C-Datasheet-Chinese.pdf
... ...
Binary files /dev/null and b/Chip-cn-dat/Fuman-dat/XPM52C-dat/XPM52C-Datasheet-Chinese.pdf differ
Chip-cn-dat/Fuman-dat/XPM52C-dat/XPM52C-dat.md
... ...
@@ -0,0 +1,33 @@
1
+
2
+
3
+
4
+# XPM52C-dat
5
+
6
+- datasheet == [[XPM52C-Datasheet-Chinese.pdf]]
7
+
8
+- USB Power Delivery PD2.0/PD3.2 including PPS
9
+- USB Battery Charging BC1.2
10
+- Qualcomm Quick Charge QC2.0, QC3.0 & 3.0+
11
+- Apple 2.4A Protocol (12W)
12
+- Samsung Adaptive Fast Charging AFC
13
+- Huawei Fast Charging Protocols FCP/SCP/HVSCP
14
+- MediaTek PE+1.1 and PE+2.0
15
+- Xiaomi Charge Turbo 27W
16
+
17
+![](2026-06-03-02-56-37.png)
18
+
19
+## board 1
20
+
21
+![](2026-06-03-02-56-51.png)
22
+
23
+![](2026-06-03-02-57-14.png)
24
+
25
+## board 2
26
+
27
+![](2026-06-03-02-59-09.png)
28
+
29
+![](2026-06-03-03-00-06.png)
30
+
31
+
32
+## ref
33
+
Chip-cn-dat/injoinic-dat/IP5356-dat/2026-06-03-02-50-43.png
... ...
Binary files /dev/null and b/Chip-cn-dat/injoinic-dat/IP5356-dat/2026-06-03-02-50-43.png differ
Chip-cn-dat/injoinic-dat/IP5356-dat/IP5356-dat.md
... ...
@@ -1,30 +1,39 @@
1
-
2
-# IP5356-dat
3
-
4
-![](2026-01-30-14-10-39.png)
5
-
6
-## boards
7
-
8
-![](2026-01-25-17-55-27.png)
9
-
10
-![](2026-01-25-17-55-38.png)
11
-
12
-![](2026-01-25-17-55-48.png)
13
-
14
-
15
-## board V2
16
-
17
-![](2026-01-25-17-56-00.png)
18
-
19
-![](2026-01-25-17-56-22.png)
20
-
21
-
22
-## error
23
-
24
-chip easily burn if wiring wrong
25
-
26
-![](2026-01-30-14-11-06.png)
27
-
28
-## ref
29
-
1
+
2
+# IP5356-dat
3
+
4
+- [[IP5356-dat]] - [[power-bank-dat]] - [[injoinic-dat]]
5
+
6
+## board 4
7
+
8
+![](2026-01-30-14-10-39.png)
9
+
10
+
11
+## board 3
12
+
13
+![](2026-06-03-02-50-43.png)
14
+
15
+## boards
16
+
17
+![](2026-01-25-17-55-27.png)
18
+
19
+![](2026-01-25-17-55-38.png)
20
+
21
+![](2026-01-25-17-55-48.png)
22
+
23
+
24
+## board V2
25
+
26
+![](2026-01-25-17-56-00.png)
27
+
28
+![](2026-01-25-17-56-22.png)
29
+
30
+
31
+## error
32
+
33
+chip easily burn if wiring wrong
34
+
35
+![](2026-01-30-14-11-06.png)
36
+
37
+## ref
38
+
30 39
- [[injoinic-dat]]
... ...
\ No newline at end of file
Chip-cn-dat/injoinic-dat/injoinic-dat.md
... ...
@@ -1,47 +1,47 @@
1
-
2
-# injoinic-dat
3
-
4
-https://w.electrodragon.com/w/Injoinic
5
-
6
-
7
-
8
-- [[IP5356-dat]] - [[QC-charge-dat]]
9
-
10
-- [[IP2326-dat]] - [[injoinic-dat]]
11
-
12
-
13
-[[battery-protector-dat]] + all-S [[battery-charger-dat]] - [[injoinic-dat]] == [[IP2365-dat]]
14
-
15
-
16
-
17
-
18
-- [[IP236x-dat]]
19
-
20
-
21
-- [[IP5306-dat]]
22
-
23
-- IP2721 - TYPEC/PD2.0/PD3.0 Physical Layer IC for USB TYPEC input Interfaces
24
-
25
-- [[IP6518-dat]] - 支持全协议快充45W车充IC芯片 封装QFN24
26
-
27
-- [[IP6351-dat]] - IP6351S IP/英集芯一级代理小风扇驱动电源芯片带移动电源自然风
28
-
29
-- [[IP3012-dat]]
30
-
31
-
32
-## Chip Series
33
-
34
-![](2023-12-21-16-31-11.png)
35
-
36
-
37
-
38
-
39
-
40
-
41
-## ref
42
-
43
-- [[TP-dat]]
44
-
45
-- [[injoinic]]
46
-
1
+
2
+# injoinic-dat
3
+
4
+https://w.electrodragon.com/w/Injoinic
5
+
6
+
7
+
8
+- [[IP5356-dat]] - [[QC-charge-dat]]
9
+
10
+- [[IP2326-dat]] - [[injoinic-dat]]
11
+
12
+
13
+[[battery-protector-dat]] + all-S [[battery-charger-dat]] - [[injoinic-dat]] == [[IP2365-dat]]
14
+
15
+
16
+- [[IP6806-dat]]
17
+
18
+- [[IP236x-dat]]
19
+
20
+
21
+- [[IP5306-dat]]
22
+
23
+- IP2721 - TYPEC/PD2.0/PD3.0 Physical Layer IC for USB TYPEC input Interfaces
24
+
25
+- [[IP6518-dat]] - 支持全协议快充45W车充IC芯片 封装QFN24
26
+
27
+- [[IP6351-dat]] - IP6351S IP/英集芯一级代理小风扇驱动电源芯片带移动电源自然风
28
+
29
+- [[IP3012-dat]]
30
+
31
+
32
+## Chip Series
33
+
34
+![](2023-12-21-16-31-11.png)
35
+
36
+
37
+
38
+
39
+
40
+
41
+## ref
42
+
43
+- [[TP-dat]]
44
+
45
+- [[injoinic]]
46
+
47 47
- [[m]]
... ...
\ No newline at end of file
Chip-cn-dat/southchip-dat/SC8933-dat/SC8933-dat.md
... ...
@@ -0,0 +1,18 @@
1
+
2
+
3
+# SC8933-dat
4
+
5
+- [[SC8933-dat]] - [[DCDC-down-dat]] - [[power-bank-dat]]
6
+
7
+集成MOSFETs和I2C控制接口的高效率同步降压快速充电升压放电双向转换
8
+器
9
+
10
+SC8933是一颗同步降压充电控制器，同时具有反向升压放电功能。SC8933内部集成了两颗功率管（6mΩ及12mΩ Rdson），适用于单节或多节电池并联应用，并提供最大24W输出（12V/A）。
11
+
12
+充电模式时，SC8933通过将高于电池电压的输入电压降压，从而高效地完成电池充电。SC8913支持完善的充电循环管理包括：涓流充电、恒流充电和恒压充电。
13
+
14
+放电模式时，SC8933可以高效率地反向升压放电，输入/出电压最高可达14V。SC8933集成I2C接口，因此用户可以很方便地选择充电/放电模式，并通过I2C编程设置输入限流值、输出限流值和输出电压，最大限度简化系统设计，减少BOM。集成3路USB NOMS隔离管驱动并提供相应的电流检测，以及插入（包括负载接入/移除，充电器接/入移除）功能。集成了线损补偿，充放电环路状态标志方便系统设计；创新的监控输出脚，可选输出系统各节点电流/电压信号。支持IDEL模式以及开漏结构的NTC控制设计，极大的降低了待机功耗。
15
+
16
+SC8933支持完善的保护，包括欠压锁定、过压保护、过流保护、短路警示和过温保护等功能，从而保证各种异常情况下的安全。
17
+
18
+SC8933提供超小型32脚的4X4 QFN封装。
... ...
\ No newline at end of file
Chip-cn-dat/southchip-dat/southchip-dat.md
Tech-dat/interactive-dat/display-dat/LCD-dat/parallel-display-dat/RGB-LCD-dat/RGB-LCD-dat.md
... ...
@@ -1,169 +1,169 @@
1
-
2
-# RGB-LCD-dat
3
-
4
-- [[display-protocols-dat]]
5
-
6
-## datasheet
7
-
8
-AT050TN43
9
-
10
-- 5.0 AT050TN43 == [[AT050TN43 V.1 Pre Ver01 20100511 (A050-43-TT-11)_201102115899.pdf]]
11
-
12
-
13
-- 4.3 FGD430A4005 == [[4.3inch_FGD430A4005_Spec.pdf]]
14
-
15
-
16
-
17
-## standard RGB LCD 40P == RGB24Bit
18
-
19
-
20
-
21
-## RGB LCD 40-Pin Interface Pinout
22
-
23
-| Pin No. | Symbol | Description | When Not in Use |
24
-| ------- | ------ | ---------------------------------------------- | --------------- |
25
-| 1 | LEDA | B/L positive pin | |
26
-| 2 | LEDK | B/L negative pin | |
27
-| 3 | VDD | Power supply, 2.8–3.3V type | |
28
-| 4–13 | GND | Power Ground | |
29
-| 14 | VS | Frame synchronizing signal | |
30
-| 15 | HS | Line synchronizing signal | |
31
-| 16 | Pclk | Dot clock signal | |
32
-| 17 | DE | Data enable signal for RGB interface operation | Power Ground |
33
-| | | Low: access enabled; High: access inhibited | |
34
-| 18–22 | B0–B4 | 5-bit Blue data input | |
35
-| 23–28 | G0–G5 | 6-bit Green data input | |
36
-| 29–33 | R0–R4 | 5-bit Red data input | |
37
-| 34 | RESET | Reset the LCM | |
38
-| 35 | CSA | Chip select signal | |
39
-| 36 | SCL | Serial clock | |
40
-| 37 | SDA | Serial data input/output (bidirectional pin) | |
41
-| 38 | GND | Power Ground | |
42
-| 39 | VDD | Power supply, 2.8–3.3V type | |
43
-| 40 | NC | Dummy | |
44
-
45
-
46
-available size == 5"
47
-
48
-IPS / 800*480
49
-
50
-![](2025-08-09-18-16-37.png)
51
-
52
-![](2025-08-09-17-16-12.png)
53
-
54
-power
55
-- LEDK
56
-- LEDA
57
-- GND
58
-- VCC
59
-
60
-red
61
-- R0 - GND
62
-- R1 - GND
63
-- R2
64
-- R3
65
-- R4
66
-- R5
67
-- R6
68
-- R7
69
-
70
-green
71
-- G0 - GND
72
-- G1 - GND
73
-- G2
74
-- G3
75
-- G4
76
-- G5
77
-- G6
78
-- G7
79
-
80
-blue
81
-- B0 - GND
82
-- B1 - GND
83
-- B2
84
-- B3
85
-- B4
86
-- B5
87
-- B6
88
-- B7
89
-
90
-- GND
91
-- CLK
92
-- DISP - 3V3
93
-- HSYNC
94
-- VSYNC
95
-- DEN == LCD_DE
96
-- NC - 3V3
97
-- GND
98
-
99
-touch
100
-- XR
101
-- YD
102
-- XL
103
-- YU
104
-
105
-
106
-40Pin RGB/触摸接口
107
-
108
-此处参考屏幕数据手册即可，由于F1C200S只支持RGB565,RGB666，此处使用RGB666，屏蔽了RGB三色的低2位，这样最终色彩影响比较小，同时，F1C200S内置色彩抖动，可以更加接近RGB888效果。
109
-
110
-其中需要注意的是,CTP_SDA/CTP_SCL最好加上上拉电阻，此处选用了内部上拉，所以并没有加电阻，该部分原理图如下所示：
111
-
112
-![](2025-08-19-14-27-13.png)
113
-
114
-图2.15 RGB/触摸接口原理图
115
-
116
-引脚定义可参考屏幕数据手册，如下图：
117
-
118
-
119
-![](2025-08-19-14-27-31.png)
120
-
121
-
122
-## 8-bit parallel RGB LCD
123
-
124
-# Typical 8-bit Parallel TFT LCD Pinout (Example: ILI9341, ST7789V, HX8357)
125
-
126
-| Pin | Name | Function |
127
-| --- | ---- | ------------------------------------- |
128
-| 1 | A | LED anode (backlight +) |
129
-| 2 | K | LED cathode (backlight –) |
130
-| 3 | NC | No connection |
131
-| 4 | NC | No connection |
132
-| 5 | NC | No connection |
133
-| 6 | VCC | Power supply (usually 3.3 V or 5 V) |
134
-| 7 | D7 | Data bit 7 |
135
-| 8 | D6 | Data bit 6 |
136
-| 9 | D5 | Data bit 5 |
137
-| 10 | D4 | Data bit 4 |
138
-| 11 | D3 | Data bit 3 |
139
-| 12 | D2 | Data bit 2 |
140
-| 13 | D1 | Data bit 1 |
141
-| 14 | D0 | Data bit 0 |
142
-| 15 | RD | Read strobe (MCU reads data from LCD) |
143
-| 16 | WR | Write strobe (MCU writes data to LCD) |
144
-| 17 | RS | Register select / Data-Command (DC) |
145
-| 18 | CS | Chip select |
146
-| 19 | TE | Tearing effect signal (sync) |
147
-| 20 | RST | Reset |
148
-| 21 | GND | Ground |
149
-| 22 | GND | Ground |
150
-
151
-**Notes:**
152
-- **Interface type:** 8-bit parallel MCU (8080 or 6800 mode)
153
-- **Typical driver ICs:** ILI9341, ST7789V, HX8357
154
-- `A` & `K` are for LED backlight, powered separately
155
-- `TE` is optional and used for synchronizing to avoid tearing
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-## working board
164
-
165
-- [[F133-dat]]
166
-
167
-## ref
168
-
1
+
2
+# RGB-LCD-dat
3
+
4
+- [[display-protocols-dat]]
5
+
6
+## datasheet
7
+
8
+AT050TN43
9
+
10
+- 5.0 AT050TN43 == [[AT050TN43 V.1 Pre Ver01 20100511 (A050-43-TT-11)_201102115899.pdf]]
11
+
12
+
13
+- 4.3 FGD430A4005 == [[4.3inch_FGD430A4005_Spec.pdf]]
14
+
15
+
16
+
17
+## standard RGB LCD 40P == RGB24Bit
18
+
19
+
20
+
21
+## RGB LCD 40-Pin Interface Pinout
22
+
23
+| Pin No. | Symbol | Description | When Not in Use |
24
+| ------- | ------ | ---------------------------------------------- | --------------- |
25
+| 1 | LEDA | B/L positive pin | |
26
+| 2 | LEDK | B/L negative pin | |
27
+| 3 | VDD | Power supply, 2.8–3.3V type | |
28
+| 4–13 | GND | Power Ground | |
29
+| 14 | VS | Frame synchronizing signal | |
30
+| 15 | HS | Line synchronizing signal | |
31
+| 16 | Pclk | Dot clock signal | |
32
+| 17 | DE | Data enable signal for RGB interface operation | Power Ground |
33
+| | | Low: access enabled; High: access inhibited | |
34
+| 18–22 | B0–B4 | 5-bit Blue data input | |
35
+| 23–28 | G0–G5 | 6-bit Green data input | |
36
+| 29–33 | R0–R4 | 5-bit Red data input | |
37
+| 34 | RESET | Reset the LCM | |
38
+| 35 | CSA | Chip select signal | |
39
+| 36 | SCL | Serial clock | |
40
+| 37 | SDA | Serial data input/output (bidirectional pin) | |
41
+| 38 | GND | Power Ground | |
42
+| 39 | VDD | Power supply, 2.8–3.3V type | |
43
+| 40 | NC | Dummy | |
44
+
45
+
46
+available size == 5"
47
+
48
+IPS / 800*480
49
+
50
+![](2025-08-09-18-16-37.png)
51
+
52
+![](2025-08-09-17-16-12.png)
53
+
54
+power
55
+- LEDK
56
+- LEDA
57
+- GND
58
+- VCC
59
+
60
+red
61
+- R0 - GND
62
+- R1 - GND
63
+- R2
64
+- R3
65
+- R4
66
+- R5
67
+- R6
68
+- R7
69
+
70
+green
71
+- G0 - GND
72
+- G1 - GND
73
+- G2
74
+- G3
75
+- G4
76
+- G5
77
+- G6
78
+- G7
79
+
80
+blue
81
+- B0 - GND
82
+- B1 - GND
83
+- B2
84
+- B3
85
+- B4
86
+- B5
87
+- B6
88
+- B7
89
+
90
+- GND
91
+- CLK
92
+- DISP - 3V3
93
+- HSYNC
94
+- VSYNC
95
+- DEN == LCD_DE
96
+- NC - 3V3
97
+- GND
98
+
99
+touch
100
+- XR
101
+- YD
102
+- XL
103
+- YU
104
+
105
+
106
+40Pin RGB/触摸接口
107
+
108
+此处参考屏幕数据手册即可，由于F1C200S只支持RGB565,RGB666，此处使用RGB666，屏蔽了RGB三色的低2位，这样最终色彩影响比较小，同时，F1C200S内置色彩抖动，可以更加接近RGB888效果。
109
+
110
+其中需要注意的是,CTP_SDA/CTP_SCL最好加上上拉电阻，此处选用了内部上拉，所以并没有加电阻，该部分原理图如下所示：
111
+
112
+![](2025-08-19-14-27-13.png)
113
+
114
+图2.15 RGB/触摸接口原理图
115
+
116
+引脚定义可参考屏幕数据手册，如下图：
117
+
118
+
119
+![](2025-08-19-14-27-31.png)
120
+
121
+
122
+## 8-bit parallel RGB LCD
123
+
124
+# Typical 8-bit Parallel TFT LCD Pinout (Example: ILI9341, ST7789V, HX8357)
125
+
126
+| Pin | Name | Function |
127
+| --- | ---- | ------------------------------------- |
128
+| 1 | A | LED anode (backlight +) |
129
+| 2 | K | LED cathode (backlight –) |
130
+| 3 | NC | No connection |
131
+| 4 | NC | No connection |
132
+| 5 | NC | No connection |
133
+| 6 | VCC | Power supply (usually 3.3 V or 5 V) |
134
+| 7 | D7 | Data bit 7 |
135
+| 8 | D6 | Data bit 6 |
136
+| 9 | D5 | Data bit 5 |
137
+| 10 | D4 | Data bit 4 |
138
+| 11 | D3 | Data bit 3 |
139
+| 12 | D2 | Data bit 2 |
140
+| 13 | D1 | Data bit 1 |
141
+| 14 | D0 | Data bit 0 |
142
+| 15 | RD | Read strobe (MCU reads data from LCD) |
143
+| 16 | WR | Write strobe (MCU writes data to LCD) |
144
+| 17 | RS | Register select / Data-Command (DC) |
145
+| 18 | CS | Chip select |
146
+| 19 | TE | Tearing effect signal (sync) |
147
+| 20 | RST | Reset |
148
+| 21 | GND | Ground |
149
+| 22 | GND | Ground |
150
+
151
+**Notes:**
152
+- **Interface type:** 8-bit parallel MCU (8080 or 6800 mode)
153
+- **Typical driver ICs:** ILI9341, ST7789V, HX8357
154
+- `A` & `K` are for LED backlight, powered separately
155
+- `TE` is optional and used for synchronizing to avoid tearing
156
+
157
+
158
+
159
+
160
+
161
+
162
+
163
+## working board
164
+
165
+- [[F133-dat]]
166
+
167
+## ref
168
+
169 169
- [[github]]
... ...
\ No newline at end of file
app-dat/power-bank-dat/power-bank-dat.md
... ...
@@ -30,7 +30,7 @@
30 30
31 31
- [[ETA-solutions-dat]]
32 32
33
-
33
+- [[fuman-dat]]
34 34
35 35
## products
36 36