Board-dat/NWI/NWI1139-DAT/2025-07-15-15-01-07.png
... ...
Binary files /dev/null and b/Board-dat/NWI/NWI1139-DAT/2025-07-15-15-01-07.png differ
Board-dat/NWI/NWI1139-DAT/NWI1139-DAT.md
... ...
@@ -14,6 +14,18 @@ This is a board similar to [[NWI1172-dat]], but more suitable for inductive load
14 14
15 15
![](36-17-17-31-03-2023.png)
16 16
17
+pin header:
18
+
19
+![](2025-07-15-15-01-07.png)
20
+
21
+| L | R |
22
+| --- | ---- |
23
+| +5V | GND |
24
+| TXD | RXD |
25
+| IO5 | IO4 |
26
+| 3V3 | IO2 |
27
+| ADC | IO15 |
28
+| --- | IO14 |
17 29
18 30
19 31
## SCH
app-dat/RC-dat/RC-signal-dat/ELRS-dat/ELRS-RX-dat/2025-07-15-13-24-08.png
... ...
Binary files /dev/null and b/app-dat/RC-dat/RC-signal-dat/ELRS-dat/ELRS-RX-dat/2025-07-15-13-24-08.png differ
app-dat/RC-dat/RC-signal-dat/ELRS-dat/ELRS-RX-dat/2025-07-15-13-24-57.png
... ...
Binary files /dev/null and b/app-dat/RC-dat/RC-signal-dat/ELRS-dat/ELRS-RX-dat/2025-07-15-13-24-57.png differ
app-dat/RC-dat/RC-signal-dat/ELRS-dat/ELRS-RX-dat/ELRS-RX-dat.md
... ...
@@ -29,10 +29,28 @@ We have released 3 types of RX receiver modules. All use the [[ESP8285-dat]] [[M
29 29
30 30
Typically, after powering the receiver and with the remote controller turned off, the ExpressLRS hotspot can be found after a default of 60 seconds. Connect to this hotspot using a computer or mobile phone.
31 31
32
-The password is "expresslrs", and then you can access 10.0.0.1 to upload the receiver firmware.
32
+The password is "**expresslrs**", and then you can access **10.0.0.1** to upload the receiver firmware.
33 33
34 34
![](2025-05-08-18-22-08.png)
35 35
36
+check the firmware version:
37
+
38
+ Generic ESP8285 6xPWM 2.4Ghz RX
39
+ Firmware Rev. 3.5.3 (40555e) ISM2G4
40
+
41
+
42
+## hardware default output value
43
+
44
+![](2025-07-15-13-24-08.png)
45
+
46
+middle value should be 1500 for CH1, CH2, etc
47
+
48
+## modify the binding phase for binding
49
+
50
+![](2025-07-15-13-24-57.png)
51
+
52
+
53
+
36 54
## serial
37 55
38 56
Runtime Options
app-dat/RC-dat/RC-signal-dat/ELRS-dat/ELRS-dat.md
... ...
@@ -19,7 +19,7 @@ protocol output - - [[CRSF-dat]]
19 19
20 20
- [[CC2500-dat]]
21 21
22
-- [[ELRS-TX-dat]] - [[ELRS-915M-dat]] - [[ELRS-PWM-dat]] - [[ELRS-2.4Ghz-dat]]
22
+- [[ELRS-TX-dat]] - [[ELRS-RX-dat]] - [[ELRS-915M-dat]] - [[ELRS-PWM-dat]] - [[ELRS-2.4Ghz-dat]]
23 23
24 24
- [[ELRS]]
25 25