df0edcd57cca3dfde8e2abc1f7fbaa7cba9565a2
Chip-dat/OmniVision-dat/OV7670-dat/C8051F330_OV7670-V3.0-controlkeil.rar
| ... | ... | Binary files /dev/null and b/Chip-dat/OmniVision-dat/OV7670-dat/C8051F330_OV7670-V3.0-controlkeil.rar differ |
Chip-dat/OmniVision-dat/OV7670-dat/OV7670-dat.md
| ... | ... | @@ -36,7 +36,7 @@ w/ESP32 |
| 36 | 36 | - https://github.com/bitluni/ESP32CameraI2S |
| 37 | 37 | - https://github.com/igrr/esp32-cam-demo (archieved, merge into main esp32 repo) |
| 38 | 38 | - https://github.com/LilyGO/ESP32-Camera-OV7725/blob/master/ESP32_Camera/ESP32_I2S_Camera.ino |
| 39 | - |
|
| 39 | +- [[C8051F330_OV7670-V3.0-controlkeil.rar]] |
|
| 40 | 40 | |
| 41 | 41 | setup |
| 42 | 42 | |
| ... | ... | @@ -72,6 +72,8 @@ setup |
| 72 | 72 | #define password1 "Zhang520521" //Your wiff password |
| 73 | 73 | |
| 74 | 74 | |
| 75 | + |
|
| 76 | + |
|
| 75 | 77 | ## ref |
| 76 | 78 | |
| 77 | 79 | - [[OV7670-ds.pdf]] |
Chip-dat/ST-dat/STM32-dat/STM32-HDK-dat/STM32-HDK-dat.md
| ... | ... | @@ -49,6 +49,9 @@ To enter system bootloader mode (UART download mode), set the BOOT pins as follo |
| 49 | 49 | stm32flash -w firmware.bin -v -g 0x0 /dev/ttyUSB0 |
| 50 | 50 | |
| 51 | 51 | |
| 52 | +## hardware programmer |
|
| 53 | + |
|
| 54 | +- [[ST-Link-dat]] |
|
| 52 | 55 | |
| 53 | 56 | ## ref |
| 54 | 57 |
Chip-dat/ST-dat/STM32-dat/STM32-dat.md
| ... | ... | @@ -1,7 +1,9 @@ |
| 1 | 1 | |
| 2 | 2 | # STM32-dat |
| 3 | 3 | |
| 4 | -legacy wiki page - https://w.electrodragon.com/w/Category:STM32 |
|
| 4 | +[legacy wiki page](https://w.electrodragon.com/w/Category:STM32) |
|
| 5 | + |
|
| 6 | +- [[STM32-HDK-dat]] - [[STM32-SDK-dat]] |
|
| 5 | 7 | |
| 6 | 8 | ## chips |
| 7 | 9 | |
| ... | ... | @@ -13,6 +15,7 @@ legacy wiki page - https://w.electrodragon.com/w/Category:STM32 |
| 13 | 15 | |
| 14 | 16 | - [[STM32-lora-dat]] |
| 15 | 17 | |
| 18 | + |
|
| 16 | 19 | ## Boards |
| 17 | 20 | |
| 18 | 21 | STM32-F0 - [[STM1001-dat]] |
| ... | ... | @@ -21,6 +24,8 @@ STM32-F1 - [[DOD1046-dat]] - [[DOD1084-dat]] |
| 21 | 24 | |
| 22 | 25 | STM32-F4 - [[DOD1096-dat]] - [[STM1004-dat]] |
| 23 | 26 | |
| 27 | + |
|
| 28 | + |
|
| 24 | 29 | ## Programmer |
| 25 | 30 | |
| 26 | 31 | offline-supported - [[DPR1130-dat]] |
Chip-dat/broadcom-dat/broadcom-dat.md
| ... | ... | @@ -3,4 +3,10 @@ |
| 3 | 3 | |
| 4 | 4 | - [[HFBR-dat]] |
| 5 | 5 | |
| 6 | -- [[BCM2711-dat]] |
|
| ... | ... | \ No newline at end of file |
| 0 | +- [[BCM2711-dat]] |
|
| 1 | + |
|
| 2 | +- IP PHONE CHIP == The BCM1113R is a highly integrated silicon solution specifically targeted at the cost-sensitive residential, Small Office Home Office (SOHO), and Small-to-Medium sized Business (SMB) market. |
|
| 3 | + |
|
| 4 | +- [BCM1113 datasheet](https://datasheet.octopart.com/BCM1113RKPBG-Broadcom-datasheet-11551948.pdf) |
|
| 5 | + |
|
| 6 | +- BCM1115KPBGP30 |
|
| ... | ... | \ No newline at end of file |
Chip-dat/chip-dat.md
| ... | ... | @@ -27,13 +27,15 @@ from a to z |
| 27 | 27 | |
| 28 | 28 | - [[nordic-dat]] - [[nrf52840-dat]] |
| 29 | 29 | |
| 30 | +- [[omniVision-dat]] |
|
| 31 | + |
|
| 30 | 32 | [[TI-dat]] - [[ti-motor-dat]] - [[ti-audio-dat]] - [[ti-logic-dat]] - [[NE555-dat]] |
| 31 | 33 | |
| 32 | 34 | [[realtek-dat]] - [[RTL8211-dat]] |
| 33 | 35 | |
| 34 | 36 | [[richtek-dat]] |
| 35 | 37 | |
| 36 | -- [[STM32-dat]] |
|
| 38 | +- [[STM32-dat]] - [[STM32-HDK-dat]] - [[STM32-SDK-dat]] |
|
| 37 | 39 | |
| 38 | 40 | - [[semtech-dat]] - [[SX1262-dat]] - [[sx1278-dat]] - [[LLCC68-dat]] |
| 39 | 41 |
SDK-dat/MDK-ARM-dat/2025-07-04-15-14-49.png
| ... | ... | Binary files /dev/null and b/SDK-dat/MDK-ARM-dat/2025-07-04-15-14-49.png differ |
SDK-dat/MDK-ARM-dat/2025-07-04-15-18-54.png
| ... | ... | Binary files /dev/null and b/SDK-dat/MDK-ARM-dat/2025-07-04-15-18-54.png differ |
SDK-dat/MDK-ARM-dat/MDK-ARM-dat.md
| ... | ... | @@ -6,9 +6,15 @@ |
| 6 | 6 | |
| 7 | 7 | - 5.3.8 |
| 8 | 8 | |
| 9 | -### Supports |
|
| 10 | 9 | |
| 11 | -- [[HDSC-SDK-dat]] |
|
| 10 | +## Output file |
|
| 11 | + |
|
| 12 | + |
|
| 13 | + |
|
| 14 | + |
|
| 15 | +## Supports |
|
| 16 | + |
|
| 17 | +- [[HDSC-SDK-dat]] - [[STM32-SDK-dat]] |
|
| 12 | 18 | |
| 13 | 19 | Supported Device |
| 14 | 20 | * https://w.electrodragon.com/w/WCH - CH579 |
| ... | ... | @@ -18,7 +24,86 @@ Supported Device |
| 18 | 24 | * https://w.electrodragon.com/w/NXP - LPC1100, RT1021 |
| 19 | 25 | * https://w.electrodragon.com/w/ARM - Cortex A5 A7 A9 |
| 20 | 26 | |
| 27 | +## Error log |
|
| 28 | + |
|
| 29 | +### --locale=english |
|
| 30 | + |
|
| 31 | +Cannot read RTE data from project file:RTEis not enabled |
|
| 32 | + |
|
| 33 | +Cannot read project file ‘E:\Git-category\git-lora\Lora2\code-stm32\LR20&30-900-0.1\Project\DX_LoRa_Test.uvprojx'! |
|
| 34 | + |
|
| 35 | + assembling startup_stm32f103xe.s... |
|
| 36 | + |
|
| 37 | + ArmClang: error: unsupported option '--locale=english' |
|
| 38 | + |
|
| 39 | +### cmsis_armclang.h |
|
| 40 | + |
|
| 41 | + ../SDK/CMSIS/Include\core_cm3.h(115): warning: In file included from... |
|
| 42 | + ../SDK/CMSIS/Include/cmsis_compiler.h(41): error: 'cmsis_armclang.h' file not found |
|
| 43 | + #include "cmsis_armclang.h" |
|
| 44 | + ^~~~~~~~~~~~~~~~~~ |
|
| 45 | + 1 error generated. |
|
| 46 | + |
|
| 47 | +**resolve** |
|
| 48 | + |
|
| 49 | +Verify the specific path within the CMSIS pack. |
|
| 50 | + |
|
| 51 | +The path might be something like CMSIS/CMSIS/Include or CMSIS/Core/Include within the pack. |
|
| 52 | + |
|
| 53 | +D:\Users\Administrator\AppData\Local\Arm\Packs\ARM\CMSIS\5.9.0\CMSIS\Core\Include |
|
| 54 | + |
|
| 55 | +D:\Users\Administrator\AppData\Local\Arm\Packs\ARM\CMSIS\5.9.0\CMSIS\Core_A\Include |
|
| 56 | + |
|
| 57 | + |
|
| 58 | +### '#pragma import' is an Arm Compiler 5 extension |
|
| 59 | + |
|
| 60 | + ../Driver/driver_usart.c(137): error: '#pragma import' is an Arm Compiler 5 extension, and is not supported by Arm Compiler for Embedded 6 [-Warmcc-pragma-import] |
|
| 61 | + #pragma import(__use_no_semihosting) |
|
| 62 | + ^ |
|
| 63 | + ../Driver/driver_usart.c(139): error: redefinition of '__FILE' |
|
| 64 | + struct __FILE |
|
| 65 | + ^ |
|
| 66 | + d:\Keil_v5\ARM\ARMCLANG\Bin\..\include\stdio.h(119): note: previous definition is here |
|
| 67 | + struct __FILE { |
|
| 68 | + ^ |
|
| 69 | + 2 errors generated. |
|
| 70 | + |
|
| 71 | + |
|
| 72 | +## DIR |
|
| 73 | + |
|
| 74 | +- D:\Keil_v5\UV4\UV4.exe |
|
| 75 | +- D:\KEIL\Keil_v5\UV4\UV4.exe |
|
| 76 | + |
|
| 77 | +## Config |
|
| 78 | + |
|
| 79 | +### Options for Target.. |
|
| 80 | + |
|
| 81 | +Configure target options |
|
| 82 | + |
|
| 83 | +#### C/C(AC6) |
|
| 84 | + |
|
| 85 | +Misc Controls: "--locale=english" |
|
| 86 | + |
|
| 87 | +#### Target |
|
| 88 | + |
|
| 89 | +**Code Generation** |
|
| 90 | + |
|
| 91 | +ARM Compiler: |
|
| 92 | + |
|
| 93 | +- V6.19 |
|
| 94 | + |
|
| 95 | +ARM Compiler 5.06 update 7 Setup |
|
| 96 | + |
|
| 97 | + |
|
| 98 | + |
|
| 99 | +## License |
|
| 100 | + |
|
| 101 | + |
|
| 102 | + |
|
| 103 | + |
|
| 104 | + |
|
| 105 | + |
|
| 21 | 106 | |
| 22 | -## KEIL-C51 |
|
| 107 | +## ref |
|
| 23 | 108 | |
| 24 | -- [version V9.5.3](https://electrodragon.com/KEIL%20C51V953.rar) |
|
| ... | ... | \ No newline at end of file |
| 0 | +- [[keil]] - [[MDK-ARM]] |
|
| ... | ... | \ No newline at end of file |
SDK-dat/STM32-SDK-dat/STM32-SDK-dat.md
| ... | ... | @@ -3,8 +3,25 @@ |
| 3 | 3 | |
| 4 | 4 | - [[STM32-cube-programmer-dat]] |
| 5 | 5 | |
| 6 | +- [[STM32-CubeMX-dat]] |
|
| 7 | + |
|
| 6 | 8 | - [[STM32-HDK-dat]] |
| 7 | 9 | |
| 10 | +- [[STM32-SDK-hal-dat]] |
|
| 11 | + |
|
| 8 | 12 | - [[STM32flash-dat]] == Since release 1.6.0 of the STM32 core, STM32CubeProgrammer is used to flash and replaced this tool. == https://github.com/stm32duino/stm32flash |
| 9 | 13 | |
| 10 | -- STM32 Flash loader demonstrator (UM0462) (replaced by STM32CubeProgrammer) |
|
| ... | ... | \ No newline at end of file |
| 0 | +- STM32 Flash loader demonstrator (UM0462) (replaced by STM32CubeProgrammer) |
|
| 1 | + |
|
| 2 | + |
|
| 3 | + |
|
| 4 | +## IDE |
|
| 5 | + |
|
| 6 | +- [[keil-dat]] - [[MDK-ARM-dat]] |
|
| 7 | + |
|
| 8 | + |
|
| 9 | + |
|
| 10 | + |
|
| 11 | +## ref |
|
| 12 | + |
|
| 13 | +- [[STM32-dat]] |
|
| ... | ... | \ No newline at end of file |
SDK-dat/keil-dat/keil-dat.md
| ... | ... | @@ -0,0 +1,4 @@ |
| 1 | + |
|
| 2 | +# keil-dat |
|
| 3 | + |
|
| 4 | +- [[MDK-ARM-dat]] |
|
| ... | ... | \ No newline at end of file |
Tech-dat/Network-dat/RF-dat/LORA-DAT/Lora-SDK-dat/Lora-SDK-dat.md
| ... | ... | @@ -108,4 +108,4 @@ Example (Arduino, using AESLib): |
| 108 | 108 | |
| 109 | 109 | ## ref |
| 110 | 110 | |
| 111 | -- [[lora-dat]] |
|
| ... | ... | \ No newline at end of file |
| 0 | +- [[lora-dat]] - [[lora-HDK-dat]] - [[lora-SDK-dat]] |
|
| ... | ... | \ No newline at end of file |
Tech-dat/Network-dat/RF-dat/LORA-DAT/lora-hdk-dat/lora-hdk-dat.md
| ... | ... | @@ -1,11 +1,15 @@ |
| 1 | 1 | |
| 2 | 2 | # lora-hdk-dat |
| 3 | 3 | |
| 4 | +- [[lora-SDK-dat]] |
|
| 5 | + |
|
| 4 | 6 | - [[LNA-dat]] |
| 5 | 7 | |
| 6 | 8 | ## Dev board SCH |
| 7 | 9 | |
| 8 | -2025 [[SX1262-dat]] with [[STM32-dat]] |
|
| 10 | + |
|
| 11 | + |
|
| 12 | +2025 [[SX1262-dat]] with [[STM32-dat]] - [[STM32-HDK-dat]] |
|
| 9 | 13 | |
| 10 | 14 |  |
| 11 | 15 |