d6070c975322b2a063389205d10321622f9da79b
Board/NWI/NWI1044-dat/2023-10-18-13-09-23.png
| ... | ... | Binary files /dev/null and b/Board/NWI/NWI1044-dat/2023-10-18-13-09-23.png differ |
Board/NWI/NWI1044-dat/2023-10-18-13-10-24.png
| ... | ... | Binary files /dev/null and b/Board/NWI/NWI1044-dat/2023-10-18-13-10-24.png differ |
Board/NWI/NWI1044-dat/2023-10-18-13-21-48.png
| ... | ... | Binary files /dev/null and b/Board/NWI/NWI1044-dat/2023-10-18-13-21-48.png differ |
Board/NWI/NWI1044-dat/NWI1044-dat.md
| ... | ... | @@ -0,0 +1,34 @@ |
| 1 | + |
|
| 2 | +# NWI1044-dat |
|
| 3 | + |
|
| 4 | +https://www.electrodragon.com/product/nodemcu-lua-amica-r2-esp8266-wifi-board/ |
|
| 5 | + |
|
| 6 | +- [legacy wiki page](https://w.electrodragon.com/w/ESP8266_NodeMCU_Dev_Board#R2_Version_Flash_Note) |
|
| 7 | + |
|
| 8 | + |
|
| 9 | + |
|
| 10 | + |
|
| 11 | + |
|
| 12 | + |
|
| 13 | + |
|
| 14 | +## Note |
|
| 15 | + |
|
| 16 | +- NO need to install driver for CH341 (replaced by CP2102) |
|
| 17 | +- NO need to flash firmware when you get it and use on first time. This is different with version R1. |
|
| 18 | +- To use on the first time, NO need to flash the firmware, run command file.remove("user.lua") as instructed, see the attached image. |
|
| 19 | +- Baud rate 9600 |
|
| 20 | +- To flash R2, please see the update on our Nodemcu wiki page. Baud rate 115200 |
|
| 21 | +- High quality USB cable is needed for this board to give high current supply, otherwise your board won't be recognized. |
|
| 22 | + |
|
| 23 | + |
|
| 24 | +## IDE |
|
| 25 | + |
|
| 26 | +ESPlorer |
|
| 27 | + |
|
| 28 | + |
|
| 29 | + |
|
| 30 | + |
|
| 31 | +## ref |
|
| 32 | + |
|
| 33 | +- Open source support: www.nodemcu.com |
|
| 34 | +- [[NWI1044]] - [[LUA-dat]] |
|
| ... | ... | \ No newline at end of file |
Tech/Interface/USB-TTL-dat/USB-TTL-dat.md
| ... | ... | @@ -73,3 +73,4 @@ software [[com-monitor-dat]] |
| 73 | 73 | - [[RS485-DAT]] - [[RS232-dat]] - [[I2C-dat]] |
| 74 | 74 | |
| 75 | 75 | |
| 76 | +- [[usb-ttl]] |