c7652752397c670e98aa74e76999a0e9cef95237
Board-dat/ILE/ILE1060-DAT/ILE1060-DAT.md
| ... | ... | @@ -13,6 +13,17 @@ |
| 13 | 13 | |
| 14 | 14 | |
| 15 | 15 | |
| 16 | +## packages |
|
| 17 | + |
|
| 18 | +- main display - [[ILE1060-dat]] |
|
| 19 | + |
|
| 20 | +- [[cable-ribbon-dat]] - [[HUB75-dat]] == 26P |
|
| 21 | + |
|
| 22 | +- [[cable-power-dat]] |
|
| 23 | + |
|
| 24 | +- [[screw-dat]] |
|
| 25 | + |
|
| 26 | + |
|
| 16 | 27 | ## ref |
| 17 | 28 | |
| 18 | 29 | - [[ILE1060]] |
Board-dat/MPC/MPC1073-DAT/MPC1073-DAT.md
| ... | ... | @@ -1,12 +1,20 @@ |
| 1 | 1 | |
| 2 | 2 | ## hardware |
| 3 | 3 | |
| 4 | -https://www.electrodragon.com/product/rgb-matrix-panel-drive-board-raspberry-pi/ |
|
| 4 | + |
|
| 5 | +product link - [RGB LED Matrix Panel Drive Board For Raspberry Pi](https://www.electrodragon.com/product/rgb-matrix-panel-drive-board-raspberry-pi/) |
|
| 6 | + |
|
| 5 | 7 | |
| 6 | 8 | - legacy wiki page - https://w.electrodragon.com/w/RPI_RMP_Guide |
| 7 | 9 | |
| 8 | 10 | - Pin Definitions, Product Series please refer to page - [[RMP-driver-dat]] |
| 9 | 11 | |
| 12 | + |
|
| 13 | +this is the original version - [[MPC1073-dat]], this is the optimized version - [[MPC1120-dat]], this is the discounted flaw version - [[MPC1119-dat]] |
|
| 14 | + |
|
| 15 | +display panel here - [[ILE1060-dat]] |
|
| 16 | + |
|
| 17 | + |
|
| 10 | 18 | ## Board Map |
| 11 | 19 | |
| 12 | 20 |  |
CONN-DAT/CONN-Alligator-clip-dat/CONN-Alligator-clip-dat.md
| ... | ... | @@ -1,39 +0,0 @@ |
| 1 | - |
|
| 2 | -# CONN-Alligator-clip-dat |
|
| 3 | - |
|
| 4 | - |
|
| 5 | -6. 按用途场景分类 |
|
| 6 | -① Test Alligator Clip(测试夹) |
|
| 7 | - |
|
| 8 | -实验室、万用表、电子测试常用。 |
|
| 9 | - |
|
| 10 | -② Battery Alligator Clip(电池夹) |
|
| 11 | - |
|
| 12 | -通常更大,有红黑颜色,用于夹电瓶、移动电源。 |
|
| 13 | - |
|
| 14 | -③ Medical Alligator Clip(医用夹) |
|
| 15 | - |
|
| 16 | -表面更圆顺,针对于医疗电极。 |
|
| 17 | - |
|
| 18 | -④ Automotive Alligator Clip(汽车夹) |
|
| 19 | - |
|
| 20 | -用于汽车电子,承受较大电流。 |
|
| 21 | - |
|
| 22 | -尺寸常见标准(参考) |
|
| 23 | - |
|
| 24 | -Micro:20–25 mm |
|
| 25 | - |
|
| 26 | -Mini:28–35 mm |
|
| 27 | - |
|
| 28 | -Standard:45–55 mm |
|
| 29 | - |
|
| 30 | -Heavy-duty:60–80 mm 以上 |
|
| 31 | - |
|
| 32 | - |
|
| 33 | - |
|
| 34 | - |
|
| 35 | -## ref |
|
| 36 | - |
|
| 37 | -- [[conn-dat]] |
|
| 38 | - |
|
| 39 | -- [[fab-workspace-dat]] |
|
| ... | ... | \ No newline at end of file |
CONN-DAT/CONN-Box-header-dat/CONN-Box-header-dat.md
| ... | ... | @@ -1,25 +0,0 @@ |
| 1 | - |
|
| 2 | -# CONN-Box-header-dat |
|
| 3 | - |
|
| 4 | - |
|
| 5 | -- [[SMD-dat]] - [[PTH-dat]] - [[PTH-90-dat]] |
|
| 6 | - |
|
| 7 | - |
|
| 8 | -SMD type == https://grabcad.com/library/box-header-1 |
|
| 9 | - |
|
| 10 | -[[PTH-dat]] == https://grabcad.com/library/conectores-box-header-1 |
|
| 11 | - |
|
| 12 | - |
|
| 13 | - |
|
| 14 | -## 2.0mm |
|
| 15 | - |
|
| 16 | -DC3-6/8/10/12/14/16/20-50P Straight Pin 2.0mm Pitch Simple Horn-Shaped Socket IDC Connector |
|
| 17 | - |
|
| 18 | - |
|
| 19 | - |
|
| 20 | - |
|
| 21 | -## use |
|
| 22 | - |
|
| 23 | -- [[MPC1120-dat]] |
|
| 24 | - |
|
| 25 | - |
CONN-DAT/CONN-dat.md
| ... | ... | @@ -6,7 +6,7 @@ |
| 6 | 6 | |
| 7 | 7 | - [[conn-power-dat]] |
| 8 | 8 | |
| 9 | -- [[crimp-terminal-dat]] |
|
| 9 | +- [[CONN-terminal-crimp-dat]] |
|
| 10 | 10 | |
| 11 | 11 | |
| 12 | 12 |
CONN-DAT/JST-dat/2024-09-24-19-40-26.png
| ... | ... | Binary files a/CONN-DAT/JST-dat/2024-09-24-19-40-26.png and /dev/null differ |
CONN-DAT/JST-dat/JST-SM-dat/JST-SM-dat.md
| ... | ... | @@ -1,32 +0,0 @@ |
| 1 | - |
|
| 2 | -# JST-SM-dat |
|
| 3 | - |
|
| 4 | -- [[PCA1032-dat]] |
|
| 5 | - |
|
| 6 | -The **JST SM series** is a common wire-to-wire connector, often used in LED strips, RC electronics, and low-current applications. |
|
| 7 | - |
|
| 8 | -## Key Specifications |
|
| 9 | - |
|
| 10 | -- **Series**: JST SM |
|
| 11 | -- **Type**: Wire-to-wire, single row, housing + crimp terminal |
|
| 12 | -- **Pitch (pin spacing)**: **2.50 mm** (not 2.54 mm) |
|
| 13 | -- **Current rating**: ~3 A (per pin, typical) |
|
| 14 | -- **Voltage rating**: ~250 V AC/DC |
|
| 15 | -- **Number of positions**: 2–12 pins available |
|
| 16 | -- **Locking mechanism**: Positive latch (prevents accidental disconnect) |
|
| 17 | -- **Wire gauge**: AWG 22–28 (stranded wires, typical) |
|
| 18 | -- **Mating cycles**: ~30 times (not a high-durability connector) |
|
| 19 | - |
|
| 20 | -## Important Note |
|
| 21 | - |
|
| 22 | -- Many vendors (especially on marketplaces) mislabel it as **“2.54 mm”**, but **the official JST specification is 2.50 mm pitch**. |
|
| 23 | -- Since 2.50 mm ≈ 2.54 mm, people often confuse them, but they are **not guaranteed cross-compatible** with other 2.54 mm systems (like Dupont, KK254). |
|
| 24 | - |
|
| 25 | -## Summary |
|
| 26 | - |
|
| 27 | -- **Correct spec**: **JST SM 2.50 mm pitch** |
|
| 28 | -- “JST SM 2.54” is just a common mislabeling. |
|
| 29 | - |
|
| 30 | -## ref |
|
| 31 | - |
|
| 32 | -- [[JST-dat]] |
|
| ... | ... | \ No newline at end of file |
CONN-DAT/JST-dat/JST-SM-dat/SM2.54-dat/2025-05-12-13-37-59.png
| ... | ... | Binary files a/CONN-DAT/JST-dat/JST-SM-dat/SM2.54-dat/2025-05-12-13-37-59.png and /dev/null differ |
CONN-DAT/JST-dat/JST-SM-dat/SM2.54-dat/SM2.54-dat.md
| ... | ... | @@ -1,6 +0,0 @@ |
| 1 | - |
|
| 2 | -# SM2.54-dat.md |
|
| 3 | - |
|
| 4 | -## Series Inner Connector |
|
| 5 | - |
|
| 6 | - |
|
| ... | ... | \ No newline at end of file |
CONN-DAT/JST-dat/JST-dat.md
| ... | ... | @@ -1,45 +0,0 @@ |
| 1 | - |
|
| 2 | -# JST-dat |
|
| 3 | - |
|
| 4 | -types |
|
| 5 | - |
|
| 6 | -XHB2.54 connector, 2.54mm connector with buckle, straight pin, bent pin, socket, housing, plug, spring contacts, and terminals. |
|
| 7 | - |
|
| 8 | -- [[XH2.54-dat]] |
|
| 9 | - |
|
| 10 | - |
|
| 11 | -## info |
|
| 12 | - |
|
| 13 | -https://en.wikipedia.org/wiki/JST_connector |
|
| 14 | - |
|
| 15 | - |
|
| 16 | -**JST** stands for **Japan Solderless Terminal**. |
|
| 17 | -It is a Japanese company that manufactures a wide variety of electrical connectors used in consumer electronics, automotive, industrial, and hobby applications. |
|
| 18 | - |
|
| 19 | -## Key Points |
|
| 20 | - |
|
| 21 | -- **Company**: JST Mfg. Co., Ltd. (founded 1957, Japan). |
|
| 22 | -- **Products**: Electrical connectors (board-to-wire, wire-to-wire, board-to-board, IDC, FFC/FPC, etc.). |
|
| 23 | -- **Famous series**: |
|
| 24 | - - **JST-XH** (2.50 mm pitch, board-to-wire) |
|
| 25 | - - **JST-PH** (2.00 mm pitch, board-to-wire, very common in LiPo battery packs) |
|
| 26 | - - **JST-SH** (1.00 mm pitch, used in drones and compact electronics) |
|
| 27 | - - **JST-SM** (2.50 mm pitch, wire-to-wire, common in LED strips) |
|
| 28 | -- **Why popular**: Reliable, compact, standardized, and with secure locking features compared to generic “Dupont” connectors. |
|
| 29 | - |
|
| 30 | -- [[JST-XH-dat]] - [[JST-PH-dat]] - [[JST-SM-dat]] |
|
| 31 | - |
|
| 32 | -- [[PCA1032-dat]] |
|
| 33 | - |
|
| 34 | - |
|
| 35 | - |
|
| 36 | -- also called RCY connector, BEC connector |
|
| 37 | - |
|
| 38 | -## male and female connector |
|
| 39 | - |
|
| 40 | - |
|
| 41 | - |
|
| 42 | - |
|
| 43 | - |
|
| 44 | -## 2.54mm, 2.0mm |
|
| 45 | - |
CONN-DAT/JST-dat/PH2.0-dat/2024-11-19-18-21-46.png
| ... | ... | Binary files a/CONN-DAT/JST-dat/PH2.0-dat/2024-11-19-18-21-46.png and /dev/null differ |
CONN-DAT/JST-dat/PH2.0-dat/2024-11-19-18-23-21.png
| ... | ... | Binary files a/CONN-DAT/JST-dat/PH2.0-dat/2024-11-19-18-23-21.png and /dev/null differ |
CONN-DAT/JST-dat/PH2.0-dat/PH2.0-dat.md
| ... | ... | @@ -1,12 +0,0 @@ |
| 1 | - |
|
| 2 | -# PH2.0-dat |
|
| 3 | - |
|
| 4 | -pin pitch 2.0 mm |
|
| 5 | - |
|
| 6 | - |
|
| 7 | - |
|
| 8 | - |
|
| 9 | - |
|
| 10 | -## specs |
|
| 11 | - |
|
| 12 | - |
|
| ... | ... | \ No newline at end of file |
CONN-DAT/JST-dat/XH2.54-dat/XH2.54-dat.md
| ... | ... | @@ -1,13 +0,0 @@ |
| 1 | - |
|
| 2 | - |
|
| 3 | -# XH2.54-dat |
|
| 4 | - |
|
| 5 | -- [[3D-dat]] - https://grabcad.com/library/jst-xh-2-54mm-generic-connector-set-1 |
|
| 6 | - |
|
| 7 | - |
|
| 8 | - |
|
| 9 | - |
|
| 10 | - |
|
| 11 | -## ref |
|
| 12 | - |
|
| 13 | -- [[JST-dat]] - [[CONN-dat]] |
|
| ... | ... | \ No newline at end of file |
CONN-DAT/conn-cable-terminal-dat/CONN-VH3.96-dat/2026-02-26-17-47-33.png
| ... | ... | Binary files /dev/null and b/CONN-DAT/conn-cable-terminal-dat/CONN-VH3.96-dat/2026-02-26-17-47-33.png differ |
CONN-DAT/conn-cable-terminal-dat/CONN-VH3.96-dat/CONN-VH3.96-dat.md
| ... | ... | @@ -0,0 +1,10 @@ |
| 1 | + |
|
| 2 | + |
|
| 3 | +# CONN-VH3.96-dat |
|
| 4 | + |
|
| 5 | + |
|
| 6 | + |
|
| 7 | + |
|
| 8 | +## ref |
|
| 9 | + |
|
| 10 | +- [[CONN-cable-terminal-dat]] |
|
| ... | ... | \ No newline at end of file |
CONN-DAT/conn-cable-terminal-dat/CONN-cable-Alligator-clip-dat/CONN-cable-Alligator-clip-dat.md
| ... | ... | @@ -0,0 +1,39 @@ |
| 1 | + |
|
| 2 | +# CONN-Alligator-clip-dat |
|
| 3 | + |
|
| 4 | + |
|
| 5 | +6. 按用途场景分类 |
|
| 6 | +① Test Alligator Clip(测试夹) |
|
| 7 | + |
|
| 8 | +实验室、万用表、电子测试常用。 |
|
| 9 | + |
|
| 10 | +② Battery Alligator Clip(电池夹) |
|
| 11 | + |
|
| 12 | +通常更大,有红黑颜色,用于夹电瓶、移动电源。 |
|
| 13 | + |
|
| 14 | +③ Medical Alligator Clip(医用夹) |
|
| 15 | + |
|
| 16 | +表面更圆顺,针对于医疗电极。 |
|
| 17 | + |
|
| 18 | +④ Automotive Alligator Clip(汽车夹) |
|
| 19 | + |
|
| 20 | +用于汽车电子,承受较大电流。 |
|
| 21 | + |
|
| 22 | +尺寸常见标准(参考) |
|
| 23 | + |
|
| 24 | +Micro:20–25 mm |
|
| 25 | + |
|
| 26 | +Mini:28–35 mm |
|
| 27 | + |
|
| 28 | +Standard:45–55 mm |
|
| 29 | + |
|
| 30 | +Heavy-duty:60–80 mm 以上 |
|
| 31 | + |
|
| 32 | + |
|
| 33 | + |
|
| 34 | + |
|
| 35 | +## ref |
|
| 36 | + |
|
| 37 | +- [[conn-dat]] |
|
| 38 | + |
|
| 39 | +- [[fab-workspace-dat]] |
|
| ... | ... | \ No newline at end of file |
CONN-DAT/conn-cable-terminal-dat/CONN-cable-Box-header-dat/CONN-cable-Box-header-dat.md
| ... | ... | @@ -0,0 +1,25 @@ |
| 1 | + |
|
| 2 | +# CONN-Box-header-dat |
|
| 3 | + |
|
| 4 | + |
|
| 5 | +- [[SMD-dat]] - [[PTH-dat]] - [[PTH-90-dat]] |
|
| 6 | + |
|
| 7 | + |
|
| 8 | +SMD type == https://grabcad.com/library/box-header-1 |
|
| 9 | + |
|
| 10 | +[[PTH-dat]] == https://grabcad.com/library/conectores-box-header-1 |
|
| 11 | + |
|
| 12 | + |
|
| 13 | + |
|
| 14 | +## 2.0mm |
|
| 15 | + |
|
| 16 | +DC3-6/8/10/12/14/16/20-50P Straight Pin 2.0mm Pitch Simple Horn-Shaped Socket IDC Connector |
|
| 17 | + |
|
| 18 | + |
|
| 19 | + |
|
| 20 | + |
|
| 21 | +## use |
|
| 22 | + |
|
| 23 | +- [[MPC1120-dat]] |
|
| 24 | + |
|
| 25 | + |
CONN-DAT/conn-cable-terminal-dat/CONN-cable-JST-dat/2024-09-24-19-40-26.png
| ... | ... | Binary files /dev/null and b/CONN-DAT/conn-cable-terminal-dat/CONN-cable-JST-dat/2024-09-24-19-40-26.png differ |
CONN-DAT/conn-cable-terminal-dat/CONN-cable-JST-dat/JST-SM-dat/JST-SM-dat.md
| ... | ... | @@ -0,0 +1,32 @@ |
| 1 | + |
|
| 2 | +# JST-SM-dat |
|
| 3 | + |
|
| 4 | +- [[PCA1032-dat]] |
|
| 5 | + |
|
| 6 | +The **JST SM series** is a common wire-to-wire connector, often used in LED strips, RC electronics, and low-current applications. |
|
| 7 | + |
|
| 8 | +## Key Specifications |
|
| 9 | + |
|
| 10 | +- **Series**: JST SM |
|
| 11 | +- **Type**: Wire-to-wire, single row, housing + crimp terminal |
|
| 12 | +- **Pitch (pin spacing)**: **2.50 mm** (not 2.54 mm) |
|
| 13 | +- **Current rating**: ~3 A (per pin, typical) |
|
| 14 | +- **Voltage rating**: ~250 V AC/DC |
|
| 15 | +- **Number of positions**: 2–12 pins available |
|
| 16 | +- **Locking mechanism**: Positive latch (prevents accidental disconnect) |
|
| 17 | +- **Wire gauge**: AWG 22–28 (stranded wires, typical) |
|
| 18 | +- **Mating cycles**: ~30 times (not a high-durability connector) |
|
| 19 | + |
|
| 20 | +## Important Note |
|
| 21 | + |
|
| 22 | +- Many vendors (especially on marketplaces) mislabel it as **“2.54 mm”**, but **the official JST specification is 2.50 mm pitch**. |
|
| 23 | +- Since 2.50 mm ≈ 2.54 mm, people often confuse them, but they are **not guaranteed cross-compatible** with other 2.54 mm systems (like Dupont, KK254). |
|
| 24 | + |
|
| 25 | +## Summary |
|
| 26 | + |
|
| 27 | +- **Correct spec**: **JST SM 2.50 mm pitch** |
|
| 28 | +- “JST SM 2.54” is just a common mislabeling. |
|
| 29 | + |
|
| 30 | +## ref |
|
| 31 | + |
|
| 32 | +- [[JST-dat]] |
|
| ... | ... | \ No newline at end of file |
CONN-DAT/conn-cable-terminal-dat/CONN-cable-JST-dat/JST-SM-dat/SM2.54-dat/2025-05-12-13-37-59.png
| ... | ... | Binary files /dev/null and b/CONN-DAT/conn-cable-terminal-dat/CONN-cable-JST-dat/JST-SM-dat/SM2.54-dat/2025-05-12-13-37-59.png differ |
CONN-DAT/conn-cable-terminal-dat/CONN-cable-JST-dat/JST-SM-dat/SM2.54-dat/SM2.54-dat.md
| ... | ... | @@ -0,0 +1,6 @@ |
| 1 | + |
|
| 2 | +# SM2.54-dat.md |
|
| 3 | + |
|
| 4 | +## Series Inner Connector |
|
| 5 | + |
|
| 6 | + |
|
| ... | ... | \ No newline at end of file |
CONN-DAT/conn-cable-terminal-dat/CONN-cable-JST-dat/JST-dat.md
| ... | ... | @@ -0,0 +1,45 @@ |
| 1 | + |
|
| 2 | +# JST-dat |
|
| 3 | + |
|
| 4 | +types |
|
| 5 | + |
|
| 6 | +XHB2.54 connector, 2.54mm connector with buckle, straight pin, bent pin, socket, housing, plug, spring contacts, and terminals. |
|
| 7 | + |
|
| 8 | +- [[XH2.54-dat]] |
|
| 9 | + |
|
| 10 | + |
|
| 11 | +## info |
|
| 12 | + |
|
| 13 | +https://en.wikipedia.org/wiki/JST_connector |
|
| 14 | + |
|
| 15 | + |
|
| 16 | +**JST** stands for **Japan Solderless Terminal**. |
|
| 17 | +It is a Japanese company that manufactures a wide variety of electrical connectors used in consumer electronics, automotive, industrial, and hobby applications. |
|
| 18 | + |
|
| 19 | +## Key Points |
|
| 20 | + |
|
| 21 | +- **Company**: JST Mfg. Co., Ltd. (founded 1957, Japan). |
|
| 22 | +- **Products**: Electrical connectors (board-to-wire, wire-to-wire, board-to-board, IDC, FFC/FPC, etc.). |
|
| 23 | +- **Famous series**: |
|
| 24 | + - **JST-XH** (2.50 mm pitch, board-to-wire) |
|
| 25 | + - **JST-PH** (2.00 mm pitch, board-to-wire, very common in LiPo battery packs) |
|
| 26 | + - **JST-SH** (1.00 mm pitch, used in drones and compact electronics) |
|
| 27 | + - **JST-SM** (2.50 mm pitch, wire-to-wire, common in LED strips) |
|
| 28 | +- **Why popular**: Reliable, compact, standardized, and with secure locking features compared to generic “Dupont” connectors. |
|
| 29 | + |
|
| 30 | +- [[JST-XH-dat]] - [[JST-PH-dat]] - [[JST-SM-dat]] |
|
| 31 | + |
|
| 32 | +- [[PCA1032-dat]] |
|
| 33 | + |
|
| 34 | + |
|
| 35 | + |
|
| 36 | +- also called RCY connector, BEC connector |
|
| 37 | + |
|
| 38 | +## male and female connector |
|
| 39 | + |
|
| 40 | + |
|
| 41 | + |
|
| 42 | + |
|
| 43 | + |
|
| 44 | +## 2.54mm, 2.0mm |
|
| 45 | + |
CONN-DAT/conn-cable-terminal-dat/CONN-cable-JST-dat/PH2.0-dat/2024-11-19-18-21-46.png
| ... | ... | Binary files /dev/null and b/CONN-DAT/conn-cable-terminal-dat/CONN-cable-JST-dat/PH2.0-dat/2024-11-19-18-21-46.png differ |
CONN-DAT/conn-cable-terminal-dat/CONN-cable-JST-dat/PH2.0-dat/2024-11-19-18-23-21.png
| ... | ... | Binary files /dev/null and b/CONN-DAT/conn-cable-terminal-dat/CONN-cable-JST-dat/PH2.0-dat/2024-11-19-18-23-21.png differ |
CONN-DAT/conn-cable-terminal-dat/CONN-cable-JST-dat/PH2.0-dat/PH2.0-dat.md
| ... | ... | @@ -0,0 +1,12 @@ |
| 1 | + |
|
| 2 | +# PH2.0-dat |
|
| 3 | + |
|
| 4 | +pin pitch 2.0 mm |
|
| 5 | + |
|
| 6 | + |
|
| 7 | + |
|
| 8 | + |
|
| 9 | + |
|
| 10 | +## specs |
|
| 11 | + |
|
| 12 | + |
|
| ... | ... | \ No newline at end of file |
CONN-DAT/conn-cable-terminal-dat/CONN-cable-JST-dat/XH2.54-dat/XH2.54-dat.md
| ... | ... | @@ -0,0 +1,13 @@ |
| 1 | + |
|
| 2 | + |
|
| 3 | +# XH2.54-dat |
|
| 4 | + |
|
| 5 | +- [[3D-dat]] - https://grabcad.com/library/jst-xh-2-54mm-generic-connector-set-1 |
|
| 6 | + |
|
| 7 | + |
|
| 8 | + |
|
| 9 | + |
|
| 10 | + |
|
| 11 | +## ref |
|
| 12 | + |
|
| 13 | +- [[JST-dat]] - [[CONN-dat]] |
|
| ... | ... | \ No newline at end of file |
CONN-DAT/conn-cable-terminal-dat/CONN-cable-terminal-crimp-dat/2025-06-06-19-28-14.png
| ... | ... | Binary files /dev/null and b/CONN-DAT/conn-cable-terminal-dat/CONN-cable-terminal-crimp-dat/2025-06-06-19-28-14.png differ |
CONN-DAT/conn-cable-terminal-dat/CONN-cable-terminal-crimp-dat/2025-06-06-19-28-52.png
| ... | ... | Binary files /dev/null and b/CONN-DAT/conn-cable-terminal-dat/CONN-cable-terminal-crimp-dat/2025-06-06-19-28-52.png differ |
CONN-DAT/conn-cable-terminal-dat/CONN-cable-terminal-crimp-dat/2025-06-06-19-30-32.png
| ... | ... | Binary files /dev/null and b/CONN-DAT/conn-cable-terminal-dat/CONN-cable-terminal-crimp-dat/2025-06-06-19-30-32.png differ |
CONN-DAT/conn-cable-terminal-dat/CONN-cable-terminal-crimp-dat/2025-06-06-19-31-17.png
| ... | ... | Binary files /dev/null and b/CONN-DAT/conn-cable-terminal-dat/CONN-cable-terminal-crimp-dat/2025-06-06-19-31-17.png differ |
CONN-DAT/conn-cable-terminal-dat/CONN-cable-terminal-crimp-dat/2026-02-26-17-38-08.png
| ... | ... | Binary files /dev/null and b/CONN-DAT/conn-cable-terminal-dat/CONN-cable-terminal-crimp-dat/2026-02-26-17-38-08.png differ |
CONN-DAT/conn-cable-terminal-dat/CONN-cable-terminal-crimp-dat/CONN-cable-terminal-crimp-dat.md
| ... | ... | @@ -0,0 +1,29 @@ |
| 1 | + |
|
| 2 | +# CONN-terminal-crimp-dat |
|
| 3 | + |
|
| 4 | +## VE-type tubular crimp terminal |
|
| 5 | + |
|
| 6 | + |
|
| 7 | + |
|
| 8 | +VE-type tubular crimp terminals are designed for use with stranded wire and are typically used in applications where a secure and reliable electrical connection is required. They are commonly used in automotive, industrial, and electronic applications. |
|
| 9 | + |
|
| 10 | + |
|
| 11 | + |
|
| 12 | + |
|
| 13 | +## SNB U-shape Fork-type insulated crimp terminal |
|
| 14 | + |
|
| 15 | + |
|
| 16 | + |
|
| 17 | + |
|
| 18 | + |
|
| 19 | + |
|
| 20 | + |
|
| 21 | + |
|
| 22 | +## OT-type ring terminal |
|
| 23 | + |
|
| 24 | + |
|
| 25 | + |
|
| 26 | + |
|
| 27 | +## ref |
|
| 28 | + |
|
| 29 | +- [[conn-dat]] |
|
| ... | ... | \ No newline at end of file |
CONN-DAT/conn-cable-terminal-dat/conn-cable-terminal-dat.md
| ... | ... | @@ -16,7 +16,7 @@ |
| 16 | 16 | |
| 17 | 17 | - [[KF15EDG-dat]] - 两边需要预留间隙 |
| 18 | 18 | |
| 19 | - |
|
| 19 | +- [[CONN-cable-terminal-crimp-dat]] |
|
| 20 | 20 | |
| 21 | 21 | |
| 22 | 22 | |
| ... | ... | @@ -104,6 +104,21 @@ no thing block and then push again |
| 104 | 104 | |
| 105 | 105 | |
| 106 | 106 | |
| 107 | +## categorized by pitch |
|
| 108 | + |
|
| 109 | +- [[SH1.0-dat]] - [[X12-dat]]: [] 3P / [x] 4P 1.0 mm pitch |
|
| 110 | + |
|
| 111 | +- [[1.23-cable-dat]] - [[GH1.25-dat]] |
|
| 112 | + |
|
| 113 | +- xh2.54 |
|
| 114 | + |
|
| 115 | +- ph2.0 |
|
| 116 | + |
|
| 117 | +- mx1.25 |
|
| 118 | + |
|
| 119 | +- sh1.0 |
|
| 120 | + |
|
| 121 | +- vh3.96 |
|
| 107 | 122 | |
| 108 | 123 | |
| 109 | 124 |
CONN-DAT/crimp-terminal-dat/2025-06-06-19-28-14.png
| ... | ... | Binary files a/CONN-DAT/crimp-terminal-dat/2025-06-06-19-28-14.png and /dev/null differ |
CONN-DAT/crimp-terminal-dat/2025-06-06-19-28-52.png
| ... | ... | Binary files a/CONN-DAT/crimp-terminal-dat/2025-06-06-19-28-52.png and /dev/null differ |
CONN-DAT/crimp-terminal-dat/2025-06-06-19-30-32.png
| ... | ... | Binary files a/CONN-DAT/crimp-terminal-dat/2025-06-06-19-30-32.png and /dev/null differ |
CONN-DAT/crimp-terminal-dat/2025-06-06-19-31-17.png
| ... | ... | Binary files a/CONN-DAT/crimp-terminal-dat/2025-06-06-19-31-17.png and /dev/null differ |
CONN-DAT/crimp-terminal-dat/crimp-terminal-dat.md
| ... | ... | @@ -1,24 +0,0 @@ |
| 1 | - |
|
| 2 | -# crimp-terminal-dat |
|
| 3 | - |
|
| 4 | -## VE-type tubular crimp terminal |
|
| 5 | - |
|
| 6 | - |
|
| 7 | - |
|
| 8 | -VE-type tubular crimp terminals are designed for use with stranded wire and are typically used in applications where a secure and reliable electrical connection is required. They are commonly used in automotive, industrial, and electronic applications. |
|
| 9 | - |
|
| 10 | - |
|
| 11 | - |
|
| 12 | - |
|
| 13 | -## Fork-type insulated crimp terminal |
|
| 14 | - |
|
| 15 | - |
|
| 16 | - |
|
| 17 | -## OT-type ring terminal |
|
| 18 | - |
|
| 19 | - |
|
| 20 | - |
|
| 21 | - |
|
| 22 | -## ref |
|
| 23 | - |
|
| 24 | -- [[conn-dat]] |
|
| ... | ... | \ No newline at end of file |
Tech-dat/Interface-dat/HUB75-DAT/HUB75-DAT.md
| ... | ... | @@ -2,6 +2,8 @@ |
| 2 | 2 | # HUB75-DAT |
| 3 | 3 | |
| 4 | 4 | |
| 5 | +- [[cable-ribbon-dat]] - [[HUB75-dat]] |
|
| 6 | + |
|
| 5 | 7 | |
| 6 | 8 | |
| 7 | 9 | ## HUB75 with logic shifter on channel 0 |
cable-dat/cable-dat.md
| ... | ... | @@ -78,22 +78,7 @@ |
| 78 | 78 | |
| 79 | 79 |  |
| 80 | 80 | |
| 81 | - |
|
| 82 | -## categorized by pitch |
|
| 83 | - |
|
| 84 | -- [[SH1.0-dat]] - [[X12-dat]]: [] 3P / [x] 4P 1.0 mm pitch |
|
| 85 | - |
|
| 86 | -- [[1.23-cable-dat]] - [[GH1.25-dat]] |
|
| 87 | - |
|
| 88 | -- xh2.54 |
|
| 89 | - |
|
| 90 | -- ph2.0 |
|
| 91 | - |
|
| 92 | -- mx1.25 |
|
| 93 | - |
|
| 94 | -- sh1.0 |
|
| 95 | - |
|
| 96 | -- vh3.96 |
|
| 81 | +- [[CONN-cable-dat]] |
|
| 97 | 82 | |
| 98 | 83 | ## apps |
| 99 | 84 |
cable-dat/cable-power-dat/2026-02-26-17-34-52.png
| ... | ... | Binary files /dev/null and b/cable-dat/cable-power-dat/2026-02-26-17-34-52.png differ |
cable-dat/cable-power-dat/cable-power-dat.md
| ... | ... | @@ -2,11 +2,32 @@ |
| 2 | 2 | |
| 3 | 3 | # cable-power-dat |
| 4 | 4 | |
| 5 | + |
|
| 6 | +## DC barrel jack |
|
| 7 | + |
|
| 5 | 8 | - [[CONN-power-dat]] - [[CONN-DC-barrel-jack-dat]] |
| 6 | 9 | |
| 7 | 10 | |
| 8 | 11 |  |
| 9 | 12 | |
| 13 | + |
|
| 14 | +## power cable 2 - 1Y2 - 5V output |
|
| 15 | + |
|
| 16 | + |
|
| 17 | + |
|
| 18 | +- [[CONN-cable-terminal-crimp-dat]] |
|
| 19 | + |
|
| 20 | +- [[CONN-dat]] - [[conn-cable-terminal-dat]] |
|
| 21 | + |
|
| 22 | +- 名称:一拖二/5V电源线导体材质:铜包铝 |
|
| 23 | +- 导体线径:主线2.5平方,分线1.3平方 |
|
| 24 | +- 接插端子:主线接U型冷压端子,分线接VH3.96端子 |
|
| 25 | +- 尺寸:主线35cm,分线25cm+15cm主线35cm,分线25cm+25cm |
|
| 26 | +- 包装方式:常规10条/捆,500条/箱 |
|
| 27 | + |
|
| 28 | + |
|
| 29 | + |
|
| 30 | + |
|
| 10 | 31 | ## ref |
| 11 | 32 | |
| 12 | 33 | - [[cable-dat]] |
| ... | ... | \ No newline at end of file |
cable-dat/cable-ribbon-dat/cable-ribbon-dat.md
| ... | ... | @@ -2,7 +2,7 @@ |
| 2 | 2 | # cable-ribbon-dat |
| 3 | 3 | |
| 4 | 4 | |
| 5 | - |
|
| 5 | +- [[CONN-Box-header-dat]] |
|
| 6 | 6 | |
| 7 | 7 | - [[cable-ribbon-dat]] - [[PCA1009-dat]] - [[PCA1011-dat]] - [[PCA1012-dat]] |
| 8 | 8 |