c073220c2b29a89979ecc38270b7d470897f1860
Board-dat/ARM/ARM1007-dat/ARM1007-dat.md
| ... | ... | @@ -1,9 +1,9 @@ |
| 1 | 1 | |
| 2 | 2 | # ARM1007-dat |
| 3 | 3 | |
| 4 | -HC32L136 Low-Power Cortex-M0+ Mini Dev. Board |
|
| 4 | +[HC32L136 Low-Power Cortex-M0+ Mini Dev. Board](https://www.electrodragon.com/product/hc32l136-low-power-cortex-m0-mini-dev-board/) |
|
| 5 | + |
|
| 5 | 6 | |
| 6 | -https://www.electrodragon.com/product/hc32l136-low-power-cortex-m0-mini-dev-board/ |
|
| 7 | 7 | |
| 8 | 8 | - legacy wiki page - https://w.electrodragon.com/w/HDSC_SDK |
| 9 | 9 |
Board-dat/SCU/SCU1059-dat/SCU1059-dat.md
| ... | ... | @@ -21,4 +21,6 @@ |
| 21 | 21 | |
| 22 | 22 | - [[SCU1059]] |
| 23 | 23 | |
| 24 | +- [[propeller-dat]] |
|
| 25 | + |
|
| 24 | 26 | - legacy wiki page |
Home.md
| ... | ... | @@ -19,7 +19,9 @@ |
| 19 | 19 | |
| 20 | 20 | - [[Tech-DAT]] - [[power-dat]] - [[display-dat]] - [[battery-dat]] - [[network-dat]] - [[usb-dat]] - [[interactive-dat]] |
| 21 | 21 | |
| 22 | -- [[app-dat]] - [[circuits-dat]] - [[tools-dat]] |
|
| 22 | +- [[app-dat]] - [[FPV-dat]] |
|
| 23 | + |
|
| 24 | +- [[circuits-dat]] - [[tools-dat]] |
|
| 23 | 25 | |
| 24 | 26 | - [[mechanics-dat]] |
| 25 | 27 |
Tech-dat/acturator-dat/propeller-dat/2025-09-02-13-09-57.png
| ... | ... | Binary files /dev/null and b/Tech-dat/acturator-dat/propeller-dat/2025-09-02-13-09-57.png differ |
Tech-dat/acturator-dat/propeller-dat/propeller-dat.md
| ... | ... | @@ -0,0 +1,6 @@ |
| 1 | + |
|
| 2 | +# propeller-dat |
|
| 3 | + |
|
| 4 | +## propeller installation for mobula8 |
|
| 5 | + |
|
| 6 | + |
|
| ... | ... | \ No newline at end of file |
app-dat/RC-dat/RC-supplier-dat/drone-maker-dat/happymodel-dat/mobula8-dat/2025-09-02-13-10-40.png
| ... | ... | Binary files /dev/null and b/app-dat/RC-dat/RC-supplier-dat/drone-maker-dat/happymodel-dat/mobula8-dat/2025-09-02-13-10-40.png differ |
app-dat/RC-dat/RC-supplier-dat/drone-maker-dat/happymodel-dat/mobula8-dat/mobula8-dat.md
| ... | ... | @@ -3,6 +3,29 @@ |
| 3 | 3 | |
| 4 | 4 | - [[FPV-dat]] |
| 5 | 5 | |
| 6 | + |
|
| 7 | +## pre-note |
|
| 8 | + |
|
| 9 | +REMOVE PROPS before first flight !! |
|
| 10 | + |
|
| 11 | +install propeller - [[propeller-dat]] - [[motor-dat]] |
|
| 12 | + |
|
| 13 | + |
|
| 14 | + |
|
| 15 | +## how to use |
|
| 16 | + |
|
| 17 | +config by [[USB-dat]] USB port |
|
| 18 | + |
|
| 19 | + |
|
| 20 | + |
|
| 21 | +- [[betaflight-dat]] |
|
| 22 | + |
|
| 23 | +[user manual](https://www.happymodel.cn/wp-content/uploads/2023/04/Manual-for-Mobula8-SPI-ELRS-1-2S-85mm-Micro-FPV-whoop-drone.pdf) |
|
| 24 | + |
|
| 25 | +- [[radiomaster-dat]] how to bind with it |
|
| 26 | + |
|
| 27 | +## info |
|
| 28 | + |
|
| 6 | 29 | Mobula8 |
| 7 | 30 | - 1-2S |
| 8 | 31 | - 85mm无刷穿越机 |
app-dat/RC-dat/RC-supplier-dat/radiomaster-dat/2025-09-02-13-11-15.png
| ... | ... | Binary files /dev/null and b/app-dat/RC-dat/RC-supplier-dat/radiomaster-dat/2025-09-02-13-11-15.png differ |
app-dat/RC-dat/RC-supplier-dat/radiomaster-dat/radiomaster-dat.md
| ... | ... | @@ -16,8 +16,27 @@ firmwares - https://www.radiomasterrc.com/pages/firmware-updates |
| 16 | 16 | |
| 17 | 17 |  |
| 18 | 18 | |
| 19 | + |
|
| 20 | + RadioMaster Pocket Internal 2.4GHz TX |
|
| 21 | + Firmware Rev. 3.5.4 (a6f9a2) ISM2G4 |
|
| 22 | + |
|
| 23 | + |
|
| 19 | 24 | ## wifi |
| 20 | 25 | |
| 26 | + |
|
| 27 | +turn on wifi mode: |
|
| 28 | + |
|
| 29 | +1) Power on your Radiomaster transmitter. |
|
| 30 | +2) Long-press SYS to open the System Menu. |
|
| 31 | +3) Navigate to the TOOLS tab. |
|
| 32 | +4) Run “ExpressLRS.lua”. |
|
| 33 | +5) Select “WiFi Connectivity” → “Enable Wi-Fi”. |
|
| 34 | +6) Wait for the module to restart into Wi-Fi mode. |
|
| 35 | +7) On your phone/PC, connect to SSID: ExpressLRS TX (password: expresslrs). |
|
| 36 | +8) Open a browser and go to: http://10.0.0.1 |
|
| 37 | +9) Update firmware or adjust settings in the ELRS WebUI. |
|
| 38 | +10) Exit Wi-Fi mode by backing out of the script or power-cycling the radio. |
|
| 39 | + |
|
| 21 | 40 | better use this wifi option to connect your devices to your local network: |
| 22 | 41 | |
| 23 | 42 | One-time connect to network, retain Home network setting |
| ... | ... | @@ -32,6 +51,34 @@ find firmware version |
| 32 | 51 | Firmware Rev. 3.5.4 (a6f9a2) ISM2G4 |
| 33 | 52 | |
| 34 | 53 | |
| 54 | +## module downloads |
|
| 55 | + |
|
| 56 | +1) Power off your Radiomaster Pocket. |
|
| 57 | +2) Remove the SD card (or plug in USB-C in storage mode). |
|
| 58 | +3) Download the correct EdgeTX SD card pack for Radiomaster Pocket: |
|
| 59 | + - From: https://edgetx.org/sdcard |
|
| 60 | + - Choose the same EdgeTX version as your radio. |
|
| 61 | +4) Download the latest ExpressLRS Lua script: |
|
| 62 | + - From: https://github.com/ExpressLRS/ExpressLRS |
|
| 63 | + - Copy `ExpressLRS.lua` into `/SCRIPTS/TOOLS/` on your SD card. |
|
| 64 | +5) Safely eject the SD card (or USB storage) and restart the radio. |
|
| 65 | +6) Go to [SYS] → TOOLS → Run ExpressLRS.lua. |
|
| 66 | +7) The script should now load instead of freezing. |
|
| 67 | + |
|
| 68 | +## bind with mobula8 setup |
|
| 69 | + |
|
| 70 | +- Packet Rate == 250Hz (-108d) |
|
| 71 | +- telem Ratio == STD |
|
| 72 | +- Switch Mode == Hybrid |
|
| 73 | +- Link Mode == Off |
|
| 74 | + |
|
| 75 | + |
|
| 76 | + |
|
| 77 | + |
|
| 78 | + |
|
| 79 | + |
|
| 80 | + |
|
| 81 | + |
|
| 35 | 82 | ## flash |
| 36 | 83 | |
| 37 | 84 | You must choose regulatory domain for your device in 2.4 GHz band |