Changes in a80ea6b: 1119

				Board-dat/MPC/MPC1119-DAT/2025-04-10-15-41-06.png
			
          Binary files /dev/null and b/Board-dat/MPC/MPC1119-DAT/2025-04-10-15-41-06.png differ

				Board-dat/MPC/MPC1119-DAT/MPC1119-DAT.md
			
          @@ -11,20 +11,19 @@ First version please see here. [[MPC1073-dat]]

           * Power input and output from the left large pin connectors, with power protection

           * removed memory and RTC functions

          +## Board map and Pin Definitions overview 

          -## pin definitions 

          +![](2025-04-10-15-41-06.png)

          -- pin definitions please refer to page - [[RMP-driver-dat]]

          -

          -The following two GPIOs are not used at all and free:

          -- pin SC to raspberry pi pin ID_SC

          -- pin SD to raspberry pi pin ID_SD

          +- yellow box connector: all the same VIN/GND input, 8.5mm cable terminal, XH2.54mm and XH2.0mm connectors, all can be input or outout power, all connectors are before the board power protections  

          +- purple box connector: pin header connectors 5V/3.3V/GND, after the power protections. 

          +- pink box connector: ROW_E or GPIO15 to GND or RX | GND (Debug Port)

          +- green box connector: unused ID_SC ID_SD pins 

          +- light blue box connector: pin headers of Chain-P2, can be disconnect via jumpers 

          +- orange box connector: E-line setup to HUB75 pin8 or pin4

          -Extra pins Used by Chain P3:

          -- to use the extra pins, you need to cut the jumpers to release them from the chip below, and chain P3 can not be used anymore. 

          +- pin definitions please refer to page - [[RMP-driver-dat]]

          -Debug Port: 

          -- RX | GND (some boards mark could be reversed): UART_RX debug, or ROW_E set to ground 

           ## Wiring

				Shipment-dat/shipment-express-dat/DHL-dat/DHL-dat.md
			
          @@ -12,3 +12,15 @@ Please note Fedex / DHL normally need 2-4 days to process the shipment, we have 

           - DHL lowest declare value for European Countries: 121 USD 

          +## Tracking number Ready 

          +

          +1. We will need to process your order first, depending on the complexities of your order, normally need 1-3 days.

          +

          +2. The package first will be shipped to our shipping agent's warehouse in Shenzhen, this normally needs 1 day.

          +

          +3. Then our shipping agent will transfer to DHL in Hong Kong and then DHL will process the order, this normally needs another 1 day. From now on, the tracking number will be available to email to you.

          +

          +4. Then DHL will schedule the airplane international flight, this normally needs 2-4 days.

          +

          +5. Then DHL will process the order in your country, this normally needs 1-2 days.

          +

				app-dat/app-dat.md
			
          @@ -15,7 +15,7 @@

           - [[logic-inverter-dat]] or [[data-logger-dat]], [[eneregy-meter-dat]]

          -- [[solar-power-dat]]

          +- [[solar-power-dat]] - [[power-storage-dat]]

           ## topics

				app-dat/power-storage-dat/power-storage-dat.md
			
          @@ -0,0 +1,3 @@

          +

          +# power-storage-dat

          +

...	...	@@ -11,20 +11,19 @@ First version please see here. [[MPC1073-dat]]
11	11	* Power input and output from the left large pin connectors, with power protection
12	12	* removed memory and RTC functions
13	13
	14	+## Board map and Pin Definitions overview
14	15
15		-## pin definitions
	16	+![](2025-04-10-15-41-06.png)
16	17
17		-- pin definitions please refer to page - [[RMP-driver-dat]]
18		-
19		-The following two GPIOs are not used at all and free:
20		-- pin SC to raspberry pi pin ID_SC
21		-- pin SD to raspberry pi pin ID_SD
	18	+- yellow box connector: all the same VIN/GND input, 8.5mm cable terminal, XH2.54mm and XH2.0mm connectors, all can be input or outout power, all connectors are before the board power protections
	19	+- purple box connector: pin header connectors 5V/3.3V/GND, after the power protections.
	20	+- pink box connector: ROW_E or GPIO15 to GND or RX \| GND (Debug Port)
	21	+- green box connector: unused ID_SC ID_SD pins
	22	+- light blue box connector: pin headers of Chain-P2, can be disconnect via jumpers
	23	+- orange box connector: E-line setup to HUB75 pin8 or pin4
22	24
23		-Extra pins Used by Chain P3:
24		-- to use the extra pins, you need to cut the jumpers to release them from the chip below, and chain P3 can not be used anymore.
	25	+- pin definitions please refer to page - [[RMP-driver-dat]]
25	26
26		-Debug Port:
27		-- RX \| GND (some boards mark could be reversed): UART_RX debug, or ROW_E set to ground
28	27
29	28	## Wiring
30	29

...	...	@@ -12,3 +12,15 @@ Please note Fedex / DHL normally need 2-4 days to process the shipment, we have
12	12	- DHL lowest declare value for European Countries: 121 USD
13	13
14	14
	15	+## Tracking number Ready
	16	+
	17	+1. We will need to process your order first, depending on the complexities of your order, normally need 1-3 days.
	18	+
	19	+2. The package first will be shipped to our shipping agent's warehouse in Shenzhen, this normally needs 1 day.
	20	+
	21	+3. Then our shipping agent will transfer to DHL in Hong Kong and then DHL will process the order, this normally needs another 1 day. From now on, the tracking number will be available to email to you.
	22	+
	23	+4. Then DHL will schedule the airplane international flight, this normally needs 2-4 days.
	24	+
	25	+5. Then DHL will process the order in your country, this normally needs 1-2 days.
	26	+

...	...	@@ -15,7 +15,7 @@
15	15
16	16	- [[logic-inverter-dat]] or [[data-logger-dat]], [[eneregy-meter-dat]]
17	17
18		-- [[solar-power-dat]]
	18	+- [[solar-power-dat]] - [[power-storage-dat]]
19	19
20	20	## topics
21	21