Board-dat/Board-DAT.md
... ...
@@ -402,6 +402,8 @@ Darlinton driver - [[SCU1024-dat]]
402 402
403 403
- [[sdr1062-dat]] - [[SDR1060-dat]]
404 404
405
+- [[L298-dat]]: - [[SDR1093-dat]] - [[SDR1034-dat]] - [[SDR1048-dat]] - [[SDR1053-dat]]
406
+
405 407
### SMO
406 408
407 409
- [[SMO1013-dat]]
Board-dat/SDR/SDR1041-DAT.md
... ...
@@ -1,13 +0,0 @@
1
-
2
-# SDR1041 Optimized Version
3
-
4
-- MKS is the opmitzed version with lower current
5
-- the original version it high current and very hot.
6
-- Adjust the trimpot for MKS version for current otuput.
7
-
8
-## Optimized Version Black (Based Original version blue):
9
-
10
-- Drive current algorithm: i = vref x 2, potentiometers have three pins with a multimeter test for the 8825 direction of the pin voltage Vref, the current can be adjusted by potentiometer clockwise twist is to increase the current, counterclockwise is minus small current. Refer to the following figure:
11
-- 8825 general design problem in wiki default Vref about 1.6v, so current has 3.2A, no adjustment would be very easy to burn very hot!
12
-- MKS 8825, through design optimization, default Vref about 0.65v, default current 1.3A, maximum current of about 2.5, more safe to use. Use trimpot to adjust output current.
13
-- If you own use, the proposed purchase of MKS 8825.
... ...
\ No newline at end of file
Board-dat/SDR/SDR1041-dat/SDR1041-DAT.md
... ...
@@ -0,0 +1,13 @@
1
+
2
+# SDR1041 Optimized Version
3
+
4
+- MKS is the opmitzed version with lower current
5
+- the original version it high current and very hot.
6
+- Adjust the trimpot for MKS version for current otuput.
7
+
8
+## Optimized Version Black (Based Original version blue):
9
+
10
+- Drive current algorithm: i = vref x 2, potentiometers have three pins with a multimeter test for the 8825 direction of the pin voltage Vref, the current can be adjusted by potentiometer clockwise twist is to increase the current, counterclockwise is minus small current. Refer to the following figure:
11
+- 8825 general design problem in wiki default Vref about 1.6v, so current has 3.2A, no adjustment would be very easy to burn very hot!
12
+- MKS 8825, through design optimization, default Vref about 0.65v, default current 1.3A, maximum current of about 2.5, more safe to use. Use trimpot to adjust output current.
13
+- If you own use, the proposed purchase of MKS 8825.
... ...
\ No newline at end of file
Board-dat/SDR/SDR1053-dat/SDR1053-dat.md
... ...
@@ -0,0 +1,21 @@
1
+
2
+# SDR1053-dat
3
+
4
+## Info
5
+
6
+[product url - L298N Stepper Motor Driver Board, Arduino Supported](https://www.electrodragon.com/product/l298n-stepper-motor-driver-controller-board-for-arduino/)
7
+
8
+### Board Map, Dimension, Pins, etc.
9
+
10
+## Applications, category, tags, etc.
11
+
12
+## Demo Code and Video
13
+
14
+## ref
15
+
16
+- [[SDR1053]]
17
+
18
+- [legacy wiki page ](https://www.electrodragon.com/w/L298N_Stepper_Motor_Driver_Board)
19
+
20
+
21
+
Board-dat/SDR/SDR1093-dat/2025-04-01-14-30-26.png
... ...
Binary files /dev/null and b/Board-dat/SDR/SDR1093-dat/2025-04-01-14-30-26.png differ
Board-dat/SDR/SDR1093-dat/SDR1093-dat.md
... ...
@@ -0,0 +1,23 @@
1
+
2
+# SDR1093-dat
3
+
4
+## Info
5
+
6
+[product url - L298P Mini Motor Stepper Drive Board](https://www.electrodragon.com/product/l298p-mini-motor-stepper-drive-board/)
7
+
8
+### Board Map, Dimension, Pins, etc.
9
+
10
+![](2025-04-01-14-30-26.png)
11
+
12
+## Applications, category, tags, etc.
13
+
14
+## Demo Code and Video
15
+
16
+https://github.com/Edragon/Arduino/tree/master/arduino-env/Sketchbook/07_Motor
17
+
18
+## ref
19
+
20
+- [[SDR1093]] - [[L298-dat]]
21
+
22
+- legacy wiki page
23
+
... ...
\ No newline at end of file
Board-dat/SSL/SSL1037-dat/SSL1037-dat.md
... ...
@@ -7,6 +7,26 @@
7 7
8 8
- old version - [[3201579-dat]] - https://www.electrodragon.com/product/arduino-color-recognition-sensor-tcs230-module-detector-for-mcuavr/
9 9
10
+
11
+## Features
12
+
13
+1. Onboard TCS3200 color sensor
14
+
15
+2. With [wide-angle lens], detachable, can identify large or small objects.
16
+
17
+3. Support 3V-5V voltage input
18
+
19
+4. All the pins of the chip have been brought out, and the pins are standard 100mil (2.54mm), which is convenient for dot matrix boards
20
+
21
+5. With 4 high-brightness white LEDs, it can illuminate some objects that do not emit light by themselves. The light-emitting tube is controllable.
22
+
23
+6. S1 S2 S3 S4 can be pulled up or down on the board.
24
+
25
+7. There are 2 3mm mounting screw holes, with a spacing of 16.5mm
26
+
27
+7. PCB size: 23mm X 30mm
28
+
29
+
10 30
## Wiring
11 31
12 32
![](2024-04-28-16-24-10.png)
... ...
@@ -147,6 +167,6 @@ code
147 167
148 168
## ref
149 169
150
-- [[color-sensor-dat]]
170
+- [[color-sensor-dat]] - [[TCS230-dat]]
151 171
152 172
- [[SSL1037]]
... ...
\ No newline at end of file
Board-dat/SSL/SSL1040-dat/SSL1040-dat.md
... ...
@@ -0,0 +1,3 @@
1
+
2
+# SSL1040-dat
3
+
Board-dat/STH/STH1065-dat/STH1065-dat.md
... ...
@@ -5,6 +5,9 @@ https://www.electrodragon.com/product/ir-contactless-temperature-sensor-mlx90614
5 5
6 6
## ref
7 7
8
+- [[MLX90614-dat]]
9
+
10
+
8 11
- [[STH1065-dat]] - [[STH1066-dat]] - [[STH1067-dat]]
9 12
10 13
- [[STH1065]]
... ...
\ No newline at end of file
Board-dat/STH/STH1066-dat/STH1066-dat.md
... ...
@@ -0,0 +1,18 @@
1
+
2
+# STH1066-dat
3
+
4
+## Info
5
+
6
+[product url - IR Contactless Human Temperature Sensor MLX90614 [Version]](https://www.electrodragon.com/product/ir-contactless-temperature-sensor-mlx90614-wserial-output/)
7
+
8
+### Board Map, Dimension, Pins, etc.
9
+
10
+## Applications, category, tags, etc.
11
+
12
+## Demo Code and Video
13
+
14
+## ref
15
+
16
+- [[STH1066]] - [[MLX90614-dat]]
17
+
18
+- legacy wiki page
Chip-dat/ST-dat/L298-dat/2025-04-01-14-38-39.png
... ...
Binary files /dev/null and b/Chip-dat/ST-dat/L298-dat/2025-04-01-14-38-39.png differ
Chip-dat/ST-dat/L298-dat/L298-dat.md
... ...
@@ -0,0 +1,23 @@
1
+
2
+# L298-dat
3
+
4
+
5
+
6
+## Info
7
+
8
+chip info, datasheet, etc.
9
+
10
+- datasheet: [L298](https://www.ti.com/lit/ds/symlink/l298.pdf)
11
+- [datasheet2](https://www.mouser.sg/datasheet/2/389/l298-1849437.pdf)
12
+
13
+![](2025-04-01-14-38-39.png)
14
+
15
+
16
+## App.
17
+
18
+- [[SDR1093-dat]] - [[SDR1034-dat]] - [[SDR1048-dat]] - [[SDR1053-dat]]
19
+
20
+## ref
21
+
22
+- [[L298]]
23
+
... ...
\ No newline at end of file
Tech-dat/bridge-rectifier-dat/bridge-rectifier-dat.md
... ...
@@ -0,0 +1,15 @@
1
+
2
+# bridge-rectifier-dat
3
+
4
+## LX10M
5
+
6
+​The LX10M is a surface-mount device (SMD) bridge rectifier commonly used in [[ACDC-dat]] AC/DC power supplies and communication equipment.
7
+
8
+Manufactured by ASEMI, it features a glass passivated chip junction, ensuring good sealing reliability and resistance to electrical decline.
9
+
10
+The LX10M is designed to be halogen-free and complies with RoHS standards.
11
+
12
+
13
+## ref
14
+
15
+- [[ACDC-dat]]
... ...
\ No newline at end of file
Tech-dat/melexis-dat/MLX90614-dat/MLX90614-Datasheet-Melexis.pdf
... ...
Binary files /dev/null and b/Tech-dat/melexis-dat/MLX90614-dat/MLX90614-Datasheet-Melexis.pdf differ
Tech-dat/melexis-dat/MLX90614-dat/MLX90614-dat.md
... ...
@@ -0,0 +1,27 @@
1
+
2
+# MLX90614-dat
3
+
4
+
5
+## Info
6
+
7
+chip info, datasheet, etc.
8
+
9
+The MLX90614 is an infrared temperature sensor for non-contact temperature measurement.
10
+
11
+It can measure temperatures within the range of -70 to 380 degree Celsius with an accuracy of about 0.5C at room temperature.
12
+
13
+MLX90614 Infrared Thermometer.
14
+
15
+https://www.melexis.com/en/product/MLX90614/Digital-Plug-Play-Infrared-Thermometer-TO-Can
16
+
17
+datasheet - [[MLX90614-Datasheet-Melexis.pdf]]
18
+
19
+## App.
20
+
21
+- [[STH1065-dat]] - [[STH1066-dat]] - [[STH1067-dat]]
22
+
23
+
24
+## ref
25
+
26
+
27
+- [[MLX90614]]
... ...
\ No newline at end of file
Tech-dat/melexis-dat/melexis-dat.md
... ...
@@ -0,0 +1,2 @@
1
+
2
+# melexis-dat