907415f40eb8786a606f95e04193f60830f70d79
Chip-cn-dat/WCH-dat/WCH-DAT.md
| ... | ... | @@ -36,6 +36,10 @@ |
| 36 | 36 | |
| 37 | 37 | - [[CH9343-dat]] |
| 38 | 38 | |
| 39 | +## ethernet |
|
| 40 | + |
|
| 41 | +- [[CH395-dat]] |
|
| 42 | + |
|
| 39 | 43 | |
| 40 | 44 | ## repository |
| 41 | 45 |
Chip-dat/Cirrus-dat/CS8416-dat.md
| ... | ... | @@ -0,0 +1,8 @@ |
| 1 | + |
|
| 2 | +# CS8416-dat.md |
|
| 3 | + |
|
| 4 | +192 kHz Digital Audio Receiver |
|
| 5 | + |
|
| 6 | +The CS8416 is a digital audio receiver that supports sample rates up to 192 kHz. It enables consumer and professional audio products to exchange S/PDIF and AES/EBU audio data. An 8:2 input multiplexer allows for up to eight channels of digital audio input data. The second output of the input multiplexer allows for a S/PDIF pass-through function for added system flexibility. It has an extremely low-jitter clock-recovery mechanism that yields a very clean recovered clock from the incoming audio stream. The device also allows for selectable signal routing to three general-purpose output pins. With its extremely low-jitter performance of 200 ps, the CS8416 is an industry-leading 192 kHz digital audio receiver. The CS8416 is ideal for consumer and professional applications such as audio/video receivers, multimedia speakers, digital mixing consoles, automotive audio systems and set-top boxes. |
|
| 7 | + |
|
| 8 | +- [[ti-audio-dat]] |
|
| ... | ... | \ No newline at end of file |
Chip-dat/Cirrus-dat/WM8978-dat.md
| ... | ... | @@ -1,30 +0,0 @@ |
| 1 | - |
|
| 2 | -# WM8978-dat.md |
|
| 3 | - |
|
| 4 | -The **WM8978** is a high-performance, low-power **stereo audio codec** from **Cirrus Logic (formerly Wolfson Microelectronics)**. It integrates a **stereo DAC (Digital-to-Analog Converter), a stereo ADC (Analog-to-Digital Converter), a headphone amplifier, and a microphone preamplifier**, making it ideal for portable and embedded audio applications. |
|
| 5 | - |
|
| 6 | -## **Key Features** |
|
| 7 | -- **High-Quality Audio Processing**: |
|
| 8 | - - Supports **16/20/24/32-bit** resolution with **sample rates up to 48kHz**. |
|
| 9 | - - **DAC**: 98dB SNR (Signal-to-Noise Ratio), -84dB THD+N (Total Harmonic Distortion + Noise). |
|
| 10 | - - **ADC**: 90dB SNR, -80dB THD+N. |
|
| 11 | - |
|
| 12 | -- **Integrated Amplifiers**: |
|
| 13 | - - **Headphone amplifier** with volume control. |
|
| 14 | - - **Speaker driver** with differential mono output. |
|
| 15 | - - **Microphone preamplifier** with gain control and noise filtering. |
|
| 16 | - |
|
| 17 | -- **Audio Interfaces**: |
|
| 18 | - - **I²S, PCM** support for easy integration with MCUs and DSPs. |
|
| 19 | - - **Programmable digital audio effects**, including **3D enhancement, equalizer, bass, and treble control**. |
|
| 20 | - |
|
| 21 | -- **Low Power Consumption**: |
|
| 22 | - - Designed for **portable battery-powered devices**. |
|
| 23 | - - Operates on **1.8V - 3.3V** power supply. |
|
| 24 | - |
|
| 25 | -## **Common Applications** |
|
| 26 | -- MP3 players and digital audio recorders. |
|
| 27 | -- Embedded systems and IoT audio applications. |
|
| 28 | -- Portable media devices and smart speakers. |
|
| 29 | -- VoIP and intercom systems. |
|
| 30 | - |
Chip-dat/Microchip-dat/MCP130-dat.md
| ... | ... | @@ -0,0 +1,4 @@ |
| 1 | + |
|
| 2 | +# MCP130-dat.md |
|
| 3 | + |
|
| 4 | +Microcontroller Supervisory Circuit with Open Drain Output |
|
| ... | ... | \ No newline at end of file |
Chip-dat/TI-dat/TI-AMP-dat/OPA2380-dat/2025-04-25-00-54-33.png
| ... | ... | Binary files /dev/null and b/Chip-dat/TI-dat/TI-AMP-dat/OPA2380-dat/2025-04-25-00-54-33.png differ |
Chip-dat/TI-dat/TI-AMP-dat/OPA2380-dat/OPA2380-dat.md
| ... | ... | @@ -0,0 +1,16 @@ |
| 1 | + |
|
| 2 | +# OPA2380-dat |
|
| 3 | + |
|
| 4 | + |
|
| 5 | + |
|
| 6 | +## APPLICATIONS |
|
| 7 | + |
|
| 8 | +- PHOTODIODE MONITORING |
|
| 9 | +- PRECISION I/V CONVERSION |
|
| 10 | +- OPTICAL AMPLIFIERS |
|
| 11 | +- CAT-SCANNER FRONT-END |
|
| 12 | + |
|
| 13 | + |
|
| 14 | +## BASIC OPERATION |
|
| 15 | + |
|
| 16 | + |
|
| ... | ... | \ No newline at end of file |
Chip-dat/TI-dat/TI-AMP-dat/TI-AMP-dat.md
| ... | ... | @@ -0,0 +1,12 @@ |
| 1 | + |
|
| 2 | + |
|
| 3 | +# TI-AMP-dat.md |
|
| 4 | + |
|
| 5 | +OPA2188 == OPA2188 0.03-μV/°C Drift, Low-Noise, Rail-to-Rail Output, 36-V, Zero-Drift Operational Amplifiers |
|
| 6 | + |
|
| 7 | +OPA2197 |
|
| 8 | + |
|
| 9 | + |
|
| 10 | +## ref |
|
| 11 | + |
|
| 12 | +- [[TI]] |
|
| ... | ... | \ No newline at end of file |
Chip-dat/TI-dat/TI-amplifier-dat/OPA2380-dat/2025-04-25-00-54-33.png
| ... | ... | Binary files a/Chip-dat/TI-dat/TI-amplifier-dat/OPA2380-dat/2025-04-25-00-54-33.png and /dev/null differ |
Chip-dat/TI-dat/TI-amplifier-dat/OPA2380-dat/OPA2380-dat.md
| ... | ... | @@ -1,16 +0,0 @@ |
| 1 | - |
|
| 2 | -# OPA2380-dat |
|
| 3 | - |
|
| 4 | - |
|
| 5 | - |
|
| 6 | -## APPLICATIONS |
|
| 7 | - |
|
| 8 | -- PHOTODIODE MONITORING |
|
| 9 | -- PRECISION I/V CONVERSION |
|
| 10 | -- OPTICAL AMPLIFIERS |
|
| 11 | -- CAT-SCANNER FRONT-END |
|
| 12 | - |
|
| 13 | - |
|
| 14 | -## BASIC OPERATION |
|
| 15 | - |
|
| 16 | - |
|
| ... | ... | \ No newline at end of file |
Chip-dat/TI-dat/TI-audio-dat/PCM1804-dat/PCM1804-dat.md
| ... | ... | @@ -0,0 +1,7 @@ |
| 1 | + |
|
| 2 | +# PCM1804-dat |
|
| 3 | + |
|
| 4 | + |
|
| 5 | +## ref |
|
| 6 | + |
|
| 7 | +- [[ti-audio-dat]] - [[PCM1804]] |
|
| ... | ... | \ No newline at end of file |
Chip-dat/TI-dat/TI-audio-dat/TI-audio-dat.md
| ... | ... | @@ -9,6 +9,9 @@ |
| 9 | 9 | |
| 10 | 10 | - [[NE5532-dat]] |
| 11 | 11 | |
| 12 | +- [[PCM1804-dat]] |
|
| 13 | + |
|
| 14 | + |
|
| 12 | 15 | ## ref |
| 13 | 16 | |
| 14 | -- [[IT-dat]] |
|
| ... | ... | \ No newline at end of file |
| 0 | +- [[TI-dat]] - [[TI-audio]] - [[TI]] |
|
| ... | ... | \ No newline at end of file |
Chip-dat/sharp-dat/2025-04-25-03-16-07.png
| ... | ... | Binary files /dev/null and b/Chip-dat/sharp-dat/2025-04-25-03-16-07.png differ |
Chip-dat/sharp-dat/2025-04-25-03-18-01.png
| ... | ... | Binary files /dev/null and b/Chip-dat/sharp-dat/2025-04-25-03-18-01.png differ |
Chip-dat/sharp-dat/sharp-dat.md
| ... | ... | @@ -0,0 +1,14 @@ |
| 1 | + |
|
| 2 | +# sharp-dat |
|
| 3 | + |
|
| 4 | +## GP1FAV31RK0F |
|
| 5 | + |
|
| 6 | +https://www.farnell.com/datasheets/1500358.pdf |
|
| 7 | + |
|
| 8 | + |
|
| 9 | + |
|
| 10 | +Rsi, Rso: Standard load resistor (Rsi: 3.3 kΩ, Rso: 2.2 kΩ) |
|
| 11 | + |
|
| 12 | +### implement |
|
| 13 | + |
|
| 14 | + |
|
| ... | ... | \ No newline at end of file |
Chip-dat/wolfson-dat/WM8978-dat.md
| ... | ... | @@ -0,0 +1,30 @@ |
| 1 | + |
|
| 2 | +# WM8978-dat.md |
|
| 3 | + |
|
| 4 | +The **WM8978** is a high-performance, low-power **stereo audio codec** from **Cirrus Logic (formerly Wolfson Microelectronics)**. It integrates a **stereo DAC (Digital-to-Analog Converter), a stereo ADC (Analog-to-Digital Converter), a headphone amplifier, and a microphone preamplifier**, making it ideal for portable and embedded audio applications. |
|
| 5 | + |
|
| 6 | +## **Key Features** |
|
| 7 | +- **High-Quality Audio Processing**: |
|
| 8 | + - Supports **16/20/24/32-bit** resolution with **sample rates up to 48kHz**. |
|
| 9 | + - **DAC**: 98dB SNR (Signal-to-Noise Ratio), -84dB THD+N (Total Harmonic Distortion + Noise). |
|
| 10 | + - **ADC**: 90dB SNR, -80dB THD+N. |
|
| 11 | + |
|
| 12 | +- **Integrated Amplifiers**: |
|
| 13 | + - **Headphone amplifier** with volume control. |
|
| 14 | + - **Speaker driver** with differential mono output. |
|
| 15 | + - **Microphone preamplifier** with gain control and noise filtering. |
|
| 16 | + |
|
| 17 | +- **Audio Interfaces**: |
|
| 18 | + - **I²S, PCM** support for easy integration with MCUs and DSPs. |
|
| 19 | + - **Programmable digital audio effects**, including **3D enhancement, equalizer, bass, and treble control**. |
|
| 20 | + |
|
| 21 | +- **Low Power Consumption**: |
|
| 22 | + - Designed for **portable battery-powered devices**. |
|
| 23 | + - Operates on **1.8V - 3.3V** power supply. |
|
| 24 | + |
|
| 25 | +## **Common Applications** |
|
| 26 | +- MP3 players and digital audio recorders. |
|
| 27 | +- Embedded systems and IoT audio applications. |
|
| 28 | +- Portable media devices and smart speakers. |
|
| 29 | +- VoIP and intercom systems. |
|
| 30 | + |
Chip-dat/wolfson-dat/wolfson-dat.md
| ... | ... | @@ -0,0 +1,4 @@ |
| 1 | + |
|
| 2 | +# wolfson-dat |
|
| 3 | + |
|
| 4 | +WM8762 == 24-bit 192kHz Stereo DAC |
|
| ... | ... | \ No newline at end of file |
Tech-dat/Interface-dat/interface-dat.md
| ... | ... | @@ -15,10 +15,11 @@ |
| 15 | 15 | |
| 16 | 16 | - [[OTG-dat]] |
| 17 | 17 | |
| 18 | -more at [[cable-dat]] - [[fiber-optic-dat]] |
|
| 18 | +more at [[cable-dat]] - [[fiber-optic-dat]] - [[toslink-dat]] |
|
| 19 | 19 | |
| 20 | -long range secure by cable - [[RS485-dat]] - [[fiber-optic-dat]] - [[POF-dat]] - [[ethernet-dat]], see more comparsion in page [[fiber-optic-dat]] |
|
| 20 | +long range secure by cable - [[RS485-dat]] - [[fiber-optic-dat]] - [[POF-dat]] - [[ethernet-dat]], see more comparsion in page [[fiber-optic-dat]] - [[SFP-transceiver-dat]] |
|
| 21 | 21 | |
| 22 | +- [[analog-dat]] - [[digital-dat]] |
|
| 22 | 23 | |
| 23 | 24 | ## Breakout boards |
| 24 | 25 |
Tech-dat/Network-dat/fiber-optic-dat/TOSLINK-dat/2025-04-25-03-00-29.png
| ... | ... | Binary files /dev/null and b/Tech-dat/Network-dat/fiber-optic-dat/TOSLINK-dat/2025-04-25-03-00-29.png differ |
Tech-dat/Network-dat/fiber-optic-dat/TOSLINK-dat/2025-04-25-03-38-29.png
| ... | ... | Binary files /dev/null and b/Tech-dat/Network-dat/fiber-optic-dat/TOSLINK-dat/2025-04-25-03-38-29.png differ |
Tech-dat/Network-dat/fiber-optic-dat/TOSLINK-dat/2025-04-25-03-38-52.png
| ... | ... | Binary files /dev/null and b/Tech-dat/Network-dat/fiber-optic-dat/TOSLINK-dat/2025-04-25-03-38-52.png differ |
Tech-dat/Network-dat/fiber-optic-dat/TOSLINK-dat/TOSLINK-dat.md
| ... | ... | @@ -1,7 +1,7 @@ |
| 1 | 1 | |
| 2 | 2 | # TOSLINK-dat |
| 3 | 3 | |
| 4 | - |
|
| 4 | +- [[sharp-dat]] - [[toslink]] |
|
| 5 | 5 | |
| 6 | 6 | ## TOSLINK |
| 7 | 7 | |
| ... | ... | @@ -73,8 +73,27 @@ While **TOSLINK** (optical) is a popular and widely used optical standard, espec |
| 73 | 73 | - **POF with TTL transceivers** directly handles **5V logic signals**, making it simpler and **more compatible** with serial communication. |
| 74 | 74 | |
| 75 | 75 | |
| 76 | +## TOTX |
|
| 76 | 77 | |
| 77 | -## TOTX147 |
|
| 78 | +### TOTX147 |
|
| 78 | 79 | |
| 79 | 80 | - connector-less |
| 80 | 81 | |
| 82 | +### TOTX1350 |
|
| 83 | + |
|
| 84 | + |
|
| 85 | + |
|
| 86 | + |
|
| 87 | +## SCH? |
|
| 88 | + |
|
| 89 | +refer more info from [[pmod-dat]] |
|
| 90 | +TX |
|
| 91 | + |
|
| 92 | + |
|
| 93 | +RX |
|
| 94 | + |
|
| 95 | + |
|
| 96 | +## ref |
|
| 97 | + |
|
| 98 | +- [[TOSlink]] - [[fiber-optic]] |
|
| 99 | + |
|
| ... | ... | \ No newline at end of file |
Tech-dat/Network-dat/fiber-optic-dat/fiber-optic-cable-dat/POF-dat/POF-dat.md
| ... | ... | @@ -7,9 +7,9 @@ |
| 7 | 7 | |
| 8 | 8 | - [[FC300T-dat]] - [[Photolink-dat]] - [[HFBR-dat]] - [[HFBR-0500Z-Series-dat]] |
| 9 | 9 | |
| 10 | -- [[DLR2180-dat]] - [[TCPT1200-dat]] - [[vishay-dat]] |
|
| 10 | +- [[DLR2180-dat]] - [[TCPT1200-dat]] - [[vishay-dat]] - [[sharp-dat]] |
|
| 11 | 11 | |
| 12 | -- [[toshiba-dat]] - [[TOTX-TORX-dat]] - [[toslink-dat]] |
|
| 12 | +- [[toshiba-dat]] - [[TOTX-TORX-dat]] - [[toslink-dat]] |
|
| 13 | 13 | |
| 14 | 14 | - [[POF]] |
| 15 | 15 |
Tech-dat/Network-dat/fiber-optic-dat/fiber-optic-transceiver-dat/SFP-transceiver-dat/2025-04-25-03-45-07.png
| ... | ... | Binary files /dev/null and b/Tech-dat/Network-dat/fiber-optic-dat/fiber-optic-transceiver-dat/SFP-transceiver-dat/2025-04-25-03-45-07.png differ |
Tech-dat/Network-dat/fiber-optic-dat/fiber-optic-transceiver-dat/SFP-transceiver-dat/2025-04-25-03-45-33.png
| ... | ... | Binary files /dev/null and b/Tech-dat/Network-dat/fiber-optic-dat/fiber-optic-transceiver-dat/SFP-transceiver-dat/2025-04-25-03-45-33.png differ |
Tech-dat/Network-dat/fiber-optic-dat/fiber-optic-transceiver-dat/SFP-transceiver-dat/SFP-transceiver-dat.md
| ... | ... | @@ -2,11 +2,30 @@ |
| 2 | 2 | # SFP-transceiver-dat |
| 3 | 3 | |
| 4 | 4 | |
| 5 | -- [[SFP-receiver-housing-dat]] |
|
| 5 | +- [[SFP-receiver-housing-dat]] - [[SFP]] - [[pmod-dat]] |
|
| 6 | 6 | |
| 7 | 7 | Most SFP modules use LC connectors, though some may use SC (older gear) or others for special applications. - [[LC-connector-dat]] |
| 8 | 8 | |
| 9 | 9 | |
| 10 | +## What is inside a SFP transceiver? |
|
| 11 | + |
|
| 12 | +Fiber optic transceivers are key components of the fiber optic transmission network. They are designed in small form-factor with some integrated optical sub-assemblies which can be suitable for the high-density network. There are many SFPs available in the market with different features and specifications(SFP & SFP+). |
|
| 13 | + |
|
| 14 | +Aren’t you aware of the major functions of these transceiver modules? |
|
| 15 | + |
|
| 16 | +- SFPs will transmit data and receive the data. |
|
| 17 | +- Transceivers provide the conversion of electrical signals to optical signals and vice versa. |
|
| 18 | + |
|
| 19 | +Inside the metal casing of a transceiver, there are several components and sub-assemblies that join together to form this. |
|
| 20 | + |
|
| 21 | +- Transmitter Optical Sub Assembly (TOSA) |
|
| 22 | +- Receiver Optical Sub Assembly (ROSA) |
|
| 23 | +- Bi-Directional Optical Sub Assembly (BOSA) |
|
| 24 | + |
|
| 25 | + |
|
| 26 | + |
|
| 27 | + |
|
| 28 | + |
|
| 10 | 29 | ## 🔌 Common SFP Solutions for Optical Fiber |
| 11 | 30 | |
| 12 | 31 | SFP (Small Form-factor Pluggable) modules are compact, hot-swappable transceivers used to connect networking equipment (like switches and routers) to fiber optic or copper cables. |
| ... | ... | @@ -180,4 +199,4 @@ SFP+ 单模: 1310nm到1550nm波长,可传10~80千米。 |
| 180 | 199 | |
| 181 | 200 | - [[fiber-optic-dat]] |
| 182 | 201 | |
| 183 | - |
|
| 202 | +- https://forum.huawei.com/enterprise/intl/en/thread/What-is-inside-a-SFP-transceiver/667249762887417856?blogId=667249762887417856 |
Tech-dat/Network-dat/fiber-optic-dat/fiber-optic-transceiver-dat/SFP-transceiver-dat/pmod-dat/2025-04-25-03-37-44.png
| ... | ... | Binary files /dev/null and b/Tech-dat/Network-dat/fiber-optic-dat/fiber-optic-transceiver-dat/SFP-transceiver-dat/pmod-dat/2025-04-25-03-37-44.png differ |
Tech-dat/Network-dat/fiber-optic-dat/fiber-optic-transceiver-dat/SFP-transceiver-dat/pmod-dat/pmod-dat.md
| ... | ... | @@ -0,0 +1,10 @@ |
| 1 | + |
|
| 2 | +# pmod-dat |
|
| 3 | + |
|
| 4 | +https://digilent.com/reference/pmod/specification?redirect=1#communication_protocols |
|
| 5 | + |
|
| 6 | +https://vksdr.com/pmod/ |
|
| 7 | + |
|
| 8 | +- [[toslink-dat]] |
|
| 9 | + |
|
| 10 | + |
|
| ... | ... | \ No newline at end of file |
Tech-dat/digital-dat/digital-dat.md
| ... | ... | @@ -5,6 +5,29 @@ |
| 5 | 5 | |
| 6 | 6 | - [[USB-dat]] - [[HDMI-dat]] |
| 7 | 7 | |
| 8 | +- [[interface-dat]] |
|
| 9 | + |
|
| 10 | +- [[FPGA-dat]] - [[LVDS-dat]] |
|
| 11 | + |
|
| 12 | + |
|
| 13 | +- [[WCH-dat]] |
|
| 14 | + |
|
| 15 | + |
|
| 16 | +## differential TX+/TX- RX+/RX- |
|
| 17 | + |
|
| 18 | +Differential TX+/TX- and RX+/RX- lines are commonly used in high-reliability, long-distance communication interfaces where noise immunity and signal integrity are important. |
|
| 19 | + |
|
| 20 | +| Interface | Signaling Type | Full/Half Duplex | Typical Application | |
|
| 21 | +| ---------------- | -------------- | ----------------------- | ------------------------ | |
|
| 22 | +| [[RS422-dat]] | Differential | Full Duplex | Industrial, Serial | |
|
| 23 | +| [[RS485-dat]] | Differential | Half/Full Duplex | Multi-drop buses | |
|
| 24 | +| [[LVDS-dat]] | Differential | Usually Uni-directional | High-speed display/video | |
|
| 25 | +| [[CAN-dat]] | Differential | Half Duplex | Automotive/Embedded | |
|
| 26 | +| [[Ethernet-dat]] | Differential | Full Duplex | Networking | |
|
| 27 | + |
|
| 28 | +## single-ended signaling |
|
| 29 | + |
|
| 30 | +- [[serial-dat]] |
|
| 8 | 31 | |
| 9 | 32 | ## ref |
| 10 | 33 |