762e054220a7543154a3f49f9f1109f756a71fd2
Tech-dat/acturator-dat/propeller-dat/2025-09-02-22-39-21.png
| ... | ... | Binary files /dev/null and b/Tech-dat/acturator-dat/propeller-dat/2025-09-02-22-39-21.png differ |
Tech-dat/acturator-dat/propeller-dat/propeller-dat.md
| ... | ... | @@ -1,6 +1,15 @@ |
| 1 | 1 | |
| 2 | 2 | # propeller-dat |
| 3 | 3 | |
| 4 | -## propeller installation for mobula8 |
|
| 5 | 4 | |
| 6 | - |
|
| ... | ... | \ No newline at end of file |
| 0 | +## Correct setup |
|
| 1 | + |
|
| 2 | + |
|
| 3 | + |
|
| 4 | +## WRONG SETUP |
|
| 5 | + |
|
| 6 | + |
|
| 7 | + |
|
| 8 | +## ref |
|
| 9 | + |
|
| 10 | +- [[FPV-dat]] |
|
| ... | ... | \ No newline at end of file |
app-dat/RC-dat/FPV-dat/FPV-dat.md
| ... | ... | @@ -9,8 +9,12 @@ |
| 9 | 9 | |
| 10 | 10 | - [[FPV-controller-dat]] - [[Goggles-dat]] - [[BMS-dat]] - [[camera-dat]] - [[VTX-dat]] - [[flight-controller-dat]] - [[ESC-dat]] - [[motor-dat]] - [[propeller-dat]] |
| 11 | 11 | |
| 12 | +- [[RC-controller-dat]] |
|
| 13 | + |
|
| 12 | 14 | - [[FPV]] |
| 13 | 15 | |
| 16 | +- [[battery-pack-dat]] |
|
| 17 | + |
|
| 14 | 18 | ## The best overall FPV drone Starting Kit |
| 15 | 19 | |
| 16 | 20 | - [[RC-dat]] == [[radiomaster-dat]] = 50 USD |
| ... | ... | @@ -22,7 +26,7 @@ |
| 22 | 26 | |
| 23 | 27 | ## configuration |
| 24 | 28 | |
| 25 | -- [[betaflight-dat]] - [[BLHeli-Configurator-dat]] |
|
| 29 | +- [[betaflight-configurator-dat]] - [[BLHeli-Configurator-dat]] |
|
| 26 | 30 | |
| 27 | 31 | |
| 28 | 32 | ## first flight |
app-dat/RC-dat/FPV-dat/FPV-takeoff-checklist-dat.md
| ... | ... | @@ -0,0 +1,26 @@ |
| 1 | + |
|
| 2 | +# FPV-takeoff-checklist-dat.md |
|
| 3 | + |
|
| 4 | +Ensure **Motor Stop** mode is OFF (so motors spin when armed). |
|
| 5 | + |
|
| 6 | + |
|
| 7 | +Modes Tab → check flight modes assigned (Angle / Horizon / Acro). |
|
| 8 | + |
|
| 9 | + |
|
| 10 | + |
|
| 11 | + |
|
| 12 | + |
|
| 13 | + |
|
| 14 | +Configuration → **Minimum Command / Motor Idle**. - Set to ~5–10% (~1050–1100 in Betaflight). |
|
| 15 | + |
|
| 16 | +- [[RC-controller-dat]] |
|
| 17 | + |
|
| 18 | + |
|
| 19 | +- [[betaflight-configurator-dat]] |
|
| 20 | + |
|
| 21 | +- [[mobula8-dat]] |
|
| 22 | + |
|
| 23 | +- [[propeller-dat]] |
|
| 24 | + |
|
| 25 | + |
|
| 26 | +https://www.happymodel.cn/index.php/2023/05/05/default-factory-dump-file-for-mobula8/ |
|
| ... | ... | \ No newline at end of file |
app-dat/RC-dat/RC-Controller-dat/RC-controller-dat.md
| ... | ... | @@ -0,0 +1,14 @@ |
| 1 | + |
|
| 2 | +# RC-controller-dat |
|
| 3 | + |
|
| 4 | +Check **Channel Map**: should be **AETR**. |
|
| 5 | + |
|
| 6 | +- A: Aileron (Roll) |
|
| 7 | +- E: Elevator (Pitch) |
|
| 8 | +- T: Throttle |
|
| 9 | +- R: Rudder (Yaw) |
|
| 10 | + |
|
| 11 | + |
|
| 12 | + |
|
| 13 | + |
|
| 14 | +- [[mobula8-dat]] |
|
| ... | ... | \ No newline at end of file |
app-dat/RC-dat/RC-configurator-dat/betaflight-configurator-dat/betaflight-configurator-dat.md
| ... | ... | @@ -83,9 +83,9 @@ ExpressLRS250Hz |
| 83 | 83 | |
| 84 | 84 | ## Modes |
| 85 | 85 | |
| 86 | -- ARM == AUX 3 |
|
| 86 | +- ARM == AUX 1 |
|
| 87 | 87 | - angle == AUX 2 |
| 88 | -- Horizon == AUX 1 |
|
| 88 | +- Horizon == AUX 2 |
|
| 89 | 89 | - Air Mode == AUX 1, air mode only in arco mode |
| 90 | 90 | - beeper - also in AUX 1 |
| 91 | 91 | |
| ... | ... | @@ -94,6 +94,8 @@ Arco mode is very stable, good for beginners |
| 94 | 94 | |
| 95 | 95 | ## motors |
| 96 | 96 | |
| 97 | +- mixer |
|
| 98 | + |
|
| 97 | 99 | ### ✅ Recommended ESC/Motor Protocol for Mobula8 |
| 98 | 100 | - **DSHOT600** → most common, reliable, and default for Mobula8. |
| 99 | 101 | |
| ... | ... | @@ -101,8 +103,22 @@ Arco mode is very stable, good for beginners |
| 101 | 103 | - **DSHOT300** → safer fallback if you experience desyncs or motor twitching. |
| 102 | 104 | - **DSHOT1200** → possible on some boards, but not necessary (no real benefit on Mobula8). |
| 103 | 105 | |
| 106 | +test |
|
| 107 | +- [x] DSHOT 300 |
|
| 108 | +- [x] DSHOT 600 |
|
| 109 | + |
|
| 110 | +### settings |
|
| 111 | + |
|
| 112 | +DSHOT300 -- ESC/Motor protocol |
|
| 104 | 113 | |
| 114 | +[] - MOTOR_STOP Don't spin the motors when armed |
|
| 115 | +[] - ESC_SENSOR Use KISS/BLHeli_32 ESC telemetry over a separate wlre |
|
| 116 | +[x] - Bidirectional Dshot (requires supported ESC firmware) |
|
| 117 | +12 - Motor poles (number of magnets on the motor bell) |
|
| 118 | +0 - Dynamic Idle Value [* 100 RPM] |
|
| 119 | +8% - Motor Idle ( %, static) |
|
| 105 | 120 | |
| 121 | +EX1103 - KV11000 == Standard tiny whoop motors like EX1103 11000KV have 6 poles / 3-phase, but some high-torque variations may use 12 poles. |
|
| 106 | 122 | |
| 107 | 123 | ## reset |
| 108 | 124 |
power-dat/battery-charger-dat/2025-09-02-20-25-45.png
| ... | ... | Binary files /dev/null and b/power-dat/battery-charger-dat/2025-09-02-20-25-45.png differ |
power-dat/battery-charger-dat/battery-charger-dat.md
| ... | ... | @@ -79,6 +79,12 @@ request |
| 79 | 79 | - [[SM2.54-dat]] - [[JST-dat]] - [[15EDGRKP-3.81mm-dat]] - [[XT-dat]] - [[cable-dat]] |
| 80 | 80 | |
| 81 | 81 | |
| 82 | +## 2S charger |
|
| 83 | + |
|
| 84 | + |
|
| 85 | + |
|
| 86 | +- [[battery-pack-dat]] |
|
| 87 | + |
|
| 82 | 88 | |
| 83 | 89 | ## ref |
| 84 | 90 |