Tech/PCB/penalization/PCB-penalization-dat.md
... ...
@@ -1,6 +1,11 @@
1
+# Penalization
2
+
3
+
1 4
2 5
## methods
3 6
7
+
8
+
4 9
#### Castellated holes
5 10
6 11
Castellated holes, please make sure your board are designed correctly: Place holes, add V-cuts, etc
service/PCB-service-dat/PCB-service-dat.md
... ...
@@ -15,9 +15,12 @@ Please adapte this to your own "DRC(Design Rule Check)" tool, to make sure your
15 15
| Min. stop mask | 4 mils (0.1 mm) | - | Masks 4 mils |
16 16
| Min. copper/trace to ground spacing | 8 mils (0.2 mm) | - | 40 mils |
17 17
18
+
19
+### Note
18 20
* Minimum milling width of grooves is 0.8mm
19 21
* A lot numbers of vias may cost extra
20
-
22
+* Dimension: Any irregular shape should be treated as a rectangular, with maximum size.
23
+* Board test:  fully tested by fly probes.
21 24
22 25
### Other Manufacturing Limits
23 26
... ...
@@ -37,6 +40,11 @@ Please adapte this to your own "DRC(Design Rule Check)" tool, to make sure your
37 40
| Color | red, blue, green, white, yellow, black | default green\|- |
38 41
| Soldering Pads Plating | HASL, ROSH (lead-free), ENIG | |
39 42
43
+
44
+#### Half-Hole/Impedance
45
+- Half-Hole + $20, if you need this please contact first or write note in order.
46
+- Impedance + $60
47
+
40 48
### What do not support
41 49
* Four layers boards
42 50
* Blind holes (not through holes).