6677d738ae99c7c93a47bfc7d51f524079f2d563
Board/MPC/MPC1119-DAT/MPC1119-DAT.md
| ... | ... | @@ -1,9 +1,16 @@ |
| 1 | 1 | |
| 2 | 2 | # MPC1119 DAT |
| 3 | 3 | |
| 4 | + |
|
| 5 | + |
|
| 4 | 6 | ## Wiring |
| 5 | 7 | |
| 6 | 8 | - If you supply power to matrix panels separately, the converter board MPC1119 will be supplied by pins, no need extra power supply. |
| 7 | 9 | - If you supply all power from one port on the converted board, you can connect the power supply to matrix panels from another port. |
| 8 | 10 | - Voltage should be no more than 5.5V. |
| 9 | 11 | |
| 12 | +### Legacy Wiki |
|
| 13 | + |
|
| 14 | +- RMP Guide - https://w.electrodragon.com/w/RPI_RMP_Guide#P3/P4_64x64_(tested) |
|
| 15 | + |
|
| 16 | +- [[MPC1119]] |
|
| ... | ... | \ No newline at end of file |
Board/NGS/NGS1131-DAT/NGS1131-DAT.md
| ... | ... | @@ -25,7 +25,14 @@ |
| 25 | 25 | |
| 26 | 26 | Note |
| 27 | 27 | - When use VIN input, UART serial logic level power +5V should be supplied via VUSB |
| 28 | -- 3.3V for on board logic or power external |
|
| 28 | + |
|
| 29 | + |
|
| 30 | +### Power Supply |
|
| 31 | + |
|
| 32 | +- VBUS can be a USB power supply. |
|
| 33 | +- VIN can be ~18V 2A external DC power supply |
|
| 34 | +- VBAT does not lead out, so you basically can not use it unless you hack with a jumper wire. Please note we didn't mention the board can use VBAT in the product description. |
|
| 35 | +- 3.3V for on board logic or power external |
|
| 29 | 36 | |
| 30 | 37 | |
| 31 | 38 | ### Wiring UART communication with ESP32 |