Board-dat/Board-DAT.md
... ...
@@ -384,7 +384,7 @@ MT7688
384 384
385 385
[[camera-dat]]
386 386
387
-- [[SCM1030-dat]] - [[SCM1002-dat]] - [[SCM1004-dat]]
387
+- [[SCM1030-dat]] - [[SCM1002-dat]] - [[SCM1004-dat]] - [[SCM1008-dat]]
388 388
389 389
390 390
### SCU
... ...
@@ -400,7 +400,7 @@ Darlinton driver - [[SCU1024-dat]]
400 400
401 401
- [[SDR1040-DAT]] - [[SDR1041-DAT]] - [[SDR1096-DAT]] - [[SDR1106-dat]] - [[SDR1113-DAT]] - [[sdr1070-dat]]
402 402
403
-- [[sdr1062-dat]]
403
+- [[sdr1062-dat]] - [[SDR1060-dat]]
404 404
405 405
### SMO
406 406
... ...
@@ -421,9 +421,12 @@ Motion sensor
421 421
- [[STM1004-DAT]]
422 422
423 423
### SSL
424
-- [[SSL1027-dat]] - [[SSL1075-DAT]]
425 424
426
-- [[SSL1042-dat]] - [[SSL1045-dat]]
425
+- [[SSL1027-dat]] - [[SSL1075-DAT]] - [[SSL1072-dat]]
426
+
427
+- [[SSL1042-dat]] - [[SSL1045-dat]] - [[SSL1034-dat]]
428
+
429
+[[buzzer-dat]] - [[SSL1019-dat]]
427 430
428 431
### SVC
429 432
Board-dat/SDR/SDR1060-dat/2025-04-01-13-12-55.png
... ...
Binary files /dev/null and b/Board-dat/SDR/SDR1060-dat/2025-04-01-13-12-55.png differ
Board-dat/SDR/SDR1060-dat/2025-04-01-13-13-09.png
... ...
Binary files /dev/null and b/Board-dat/SDR/SDR1060-dat/2025-04-01-13-13-09.png differ
Board-dat/SDR/SDR1060-dat/2025-04-01-13-18-46.png
... ...
Binary files /dev/null and b/Board-dat/SDR/SDR1060-dat/2025-04-01-13-18-46.png differ
Board-dat/SDR/SDR1060-dat/SDR1060-dat.md
... ...
@@ -0,0 +1,71 @@
1
+
2
+# SDR1060-dat.md
3
+
4
+## Info
5
+
6
+[product url - L293D Arduino Motor Shield](https://www.electrodragon.com/product/arduino-official-motor-drive-shield-l293d/)
7
+
8
+This shield has an L293D IC, a dual H-bridge motor driver integrated circuit (IC), which allows it to drive
9
+- two DC motors,
10
+- a stepper motor,
11
+- or a servo motor.
12
+
13
+
14
+Key Features of the L293D Motor Driver Shield
15
+
16
+- Dual H-Bridge IC: The L293D IC can control up to two DC motors or one stepper motor. It provides bidirectional control for two motors independently.
17
+- Current Handling: Each channel of the L293D can handle up to 600mA of continuous current and peak currents up to 1.2A per channel.
18
+- Voltage Range: The shield can operate at a wide range of voltages, typically from 4.5V to 36V.
19
+- Protection Diodes: The shield has built-in diodes to protect the IC from back EMF generated by the motors.
20
+- PWM Control: Supports Pulse Width Modulation (PWM) for speed control of the motors.
21
+
22
+
23
+### Board Map, Dimension, Pins, etc.
24
+
25
+Pin Definitions
26
+
27
+![](2025-04-01-13-12-55.png)
28
+
29
+![](2025-04-01-13-13-09.png)
30
+
31
+
32
+| Pin No. of Connector | Pin Name | Arduino Pin | Functionality |
33
+| -------------------- | --------- | ----------- | --------------------------------------------- |
34
+| J1-1 | - | D0 | - |
35
+| J1-2 | - | D1 | - |
36
+| J1-3 | - | D2 | - |
37
+| J1-4 | PWM2B | D3 | Enable pin of L293D IC controlling port M2 |
38
+| J1-5 | DIR_CLK | D4 | Clock Pin of 74HC595 |
39
+| J1-6 | PWM0B | D5 | Enable Pin of L293D IC controlling port M3 |
40
+| J1-7 | PWM0A | D6 | Enable Pin of L293D IC controlling port M4 |
41
+| J1-8 | DIR_EN | D7 | Enable Pin of 74HC595 |
42
+| J3-1 | DIR_SER | D8 | Serial Data Input Pin of 74HC595 |
43
+| J3-2 | PWM1A | D9 | PWM control pin of Second Servo Port(SERVO_2) |
44
+| J3-3 | PWM1B | D10 | PWM control pin of First Servo Port(SER1) |
45
+| J3-4 | PWM2A | D11 | Enable pin of L293D IC controlling port M1 |
46
+| J3-5 | DIR_LATCH | D12 | Latch Pin of 74HC595 |
47
+| J3-6 | - | D13 | - |
48
+| J3-7 | Gnd | Gnd | Ground |
49
+| J3-8 | - | Aref | - |
50
+
51
+
52
+
53
+
54
+Schematic
55
+
56
+![](2025-04-01-13-18-46.png)
57
+
58
+
59
+
60
+## Applications, category, tags, etc.
61
+
62
+## Demo Code and Video
63
+
64
+## ref
65
+
66
+- [[SDR1060]] - [[L293-dat]]
67
+
68
+- [[arduino-shields-dat]] - [[motor-driver-dat]]
69
+
70
+- [legacy wiki page](https://www.electrodragon.com/w/L293D)
71
+
... ...
\ No newline at end of file
Board-dat/SSL/SSL1019-dat/2025-04-01-13-50-27.png
... ...
Binary files /dev/null and b/Board-dat/SSL/SSL1019-dat/2025-04-01-13-50-27.png differ
Board-dat/SSL/SSL1019-dat/2025-04-01-13-51-48.png
... ...
Binary files /dev/null and b/Board-dat/SSL/SSL1019-dat/2025-04-01-13-51-48.png differ
Board-dat/SSL/SSL1019-dat/2025-04-01-13-52-07.png
... ...
Binary files /dev/null and b/Board-dat/SSL/SSL1019-dat/2025-04-01-13-52-07.png differ
Board-dat/SSL/SSL1019-dat/2025-04-01-13-52-26.png
... ...
Binary files /dev/null and b/Board-dat/SSL/SSL1019-dat/2025-04-01-13-52-26.png differ
Board-dat/SSL/SSL1019-dat/2025-04-01-13-52-44.png
... ...
Binary files /dev/null and b/Board-dat/SSL/SSL1019-dat/2025-04-01-13-52-44.png differ
Board-dat/SSL/SSL1019-dat/2025-04-01-13-54-00.png
... ...
Binary files /dev/null and b/Board-dat/SSL/SSL1019-dat/2025-04-01-13-54-00.png differ
Board-dat/SSL/SSL1019-dat/SSL1019-dat.md
... ...
@@ -0,0 +1,61 @@
1
+
2
+# SSL1019-dat
3
+
4
+## Info
5
+
6
+[product url - 5PCs 5V Active Continous Beeper/Buzzer](https://www.electrodragon.com/product/3v-active-buzzer-continous-beep-12095-type/)
7
+
8
+SPECIFICATION OF R/TMB12D05
9
+
10
+FEATURES
11
+
12
+- Seal with built-in
13
+- Oscillating circuit fom wave
14
+- Soldering and washing
15
+- Case:black noryl
16
+
17
+SPECIFICATIONS:
18
+
19
+| TYPE | unit | R/TMB12D05 |
20
+| --------------------- | ---- | ---------- |
21
+| RATED VOLTAGE | (V) | 5 |
22
+| OPERATING VOLTAGE | (V) | 3~7 |
23
+| RATEDCURRENT | (mA) | 30 |
24
+| SOUND OUTPUT AT 10CM | (dB) | ≥83 |
25
+| RESONANT FREQUENCY | (Hz) | 2800±500 |
26
+| OPERATING TEMPERATURE | (C) | -20~+80 |
27
+| STORAGE TEMPERATURE | (C) | 25~+90 |
28
+| WEIGHT | (g) | 2 |
29
+
30
+![](2025-04-01-13-51-48.png)
31
+
32
+![](2025-04-01-13-52-07.png)
33
+
34
+![](2025-04-01-13-52-26.png)
35
+
36
+![](2025-04-01-13-52-44.png)
37
+
38
+注：焊锡温度：250℃时，5秒以内；350℃时2秒以内。
39
+
40
+DIMENSION:(UNIT:mm)
41
+
42
+![](2025-04-01-13-50-27.png)
43
+
44
+![](2025-04-01-13-54-00.png)
45
+
46
+
47
+### Board Map, Dimension, Pins, etc.
48
+
49
+## Applications, category, tags, etc.
50
+
51
+## Demo Code and Video
52
+
53
+
54
+## ref
55
+
56
+- [[SSL1019]]
57
+
58
+- legacy wiki page
59
+
60
+
61
+
Board-dat/SSL/SSL1034-dat/2025-04-01-13-00-01.png
... ...
Binary files /dev/null and b/Board-dat/SSL/SSL1034-dat/2025-04-01-13-00-01.png differ
Board-dat/SSL/SSL1034-dat/SSL1034-dat.md
... ...
@@ -0,0 +1,29 @@
1
+
2
+# SSL1034-dat
3
+
4
+## Info
5
+
6
+[product url - Ambient Light Sensor Breakout, BH1750FVI](https://www.electrodragon.com/product/light-sensitive-bh1750fvi-light-sensor-module/)
7
+
8
+### Board Map, Dimension, Pins, etc.
9
+
10
+schematic
11
+
12
+![](2025-04-01-13-00-01.png)
13
+
14
+
15
+## Applications, category, tags, etc.
16
+
17
+- [[BH1750FVI-dat]] - [[Ambient-light-sensor]]
18
+
19
+## Demo Code and Video
20
+
21
+- [[BH1750FVI-dat]]
22
+
23
+## ref
24
+
25
+- [[SSL1034]] - [[BH1750FVI-dat]]
26
+
27
+- [legacy wiki page ](https://www.electrodragon.com/w/index.php?title=Light-Sensitive_BH1750FVI_Light_Sensor_Module)
28
+
29
+
Board-dat/SSL/SSL1072-dat/SSL1072-dat.md
... ...
@@ -0,0 +1,21 @@
1
+
2
+# SSL1072-dat
3
+
4
+version 20KG, prefer to version [[SSL1070-dat]]
5
+
6
+## Info
7
+
8
+[product url - Load Cell Amplifier, Weight Sensor Kit, HX711 [KG]](https://www.electrodragon.com/product/load-cell-amplifier-weight-sensor-kit-hx711-kg/)
9
+
10
+### Board Map, Dimension, Pins, etc.
11
+
12
+## Applications, category, tags, etc.
13
+
14
+## Demo Code and Video
15
+
16
+## ref
17
+
18
+- [[SSL1070]]
19
+
20
+- legacy wiki page
21
+
... ...
\ No newline at end of file
Chip-dat/TI-dat/TI-Motor-dat/L293-dat/L293-dat.md
... ...
@@ -14,7 +14,9 @@ The L293D is a 16-pin motor driver IC, also known as a quad half-H driver, capab
14 14
- [[SDR1064-dat]]
15 15
16 16
17
+## demo code
17 18
19
+- single DC motor control [[afMotor-1.ino]]
18 20
19 21
## ref
20 22
Chip-dat/TI-dat/TI-Motor-dat/L293-dat/afMotor-1.ino
... ...
@@ -0,0 +1,149 @@
1
+#include <AFMotor.h>
2
+// Library to run DC Motor Using Motor Driver Shield
3
+#include <LiquidCrystal_I2C.h>
4
+// Library to Run I2C LCD
5
+
6
+LiquidCrystal_I2C lcd(0x27, 16, 2); // Format -> (Address,Columns,Rows )
7
+
8
+// Create the motor object connected to M3
9
+AF_DCMotor motor(3);
10
+
11
+// Define button pins
12
+const int forwardButtonPin = A1;
13
+const int reverseButtonPin = A2;
14
+const int stopButtonPin = A3;
15
+
16
+// Define potentiometer pin
17
+const int potPin = A0;
18
+
19
+// Variables to store motor state and direction
20
+bool motorRunning = false;
21
+int motorDirection = BACKWARD; // FORWARD or BACKWARD
22
+
23
+// Read the potentiometer value
24
+int potValue;
25
+int motorSpeed;
26
+
27
+// Variable to store button states
28
+bool forwardButtonState;
29
+bool stopButtonState;
30
+bool reverseButtonState;
31
+
32
+// Inline function to check if button is pressed packed with debouncing logic
33
+inline bool chkButtonState(int pinNum, int checkState, int debounceDelay)
34
+{
35
+ if (((digitalRead(pinNum) == checkState) ? true : false) == true)
36
+ {
37
+ delay(debounceDelay);
38
+ return (((digitalRead(pinNum) == checkState) ? (true) : (false)) == true);
39
+ }
40
+ else
41
+ {
42
+ return false;
43
+ }
44
+}
45
+
46
+void setup()
47
+{
48
+ // initialize the lcd
49
+ lcd.init();
50
+ // Turn on the Backlight
51
+ lcd.backlight();
52
+ // Clear the display buffer
53
+ lcd.clear();
54
+
55
+ // Set cursor (Column, Row)
56
+ lcd.setCursor(0, 0);
57
+ lcd.print("DC Motor using");
58
+ lcd.setCursor(0, 1);
59
+ lcd.print("L293D Shield");
60
+
61
+ // Set button pins as inputs
62
+ pinMode(forwardButtonPin, INPUT_PULLUP);
63
+ pinMode(stopButtonPin, INPUT_PULLUP);
64
+ pinMode(reverseButtonPin, INPUT_PULLUP);
65
+
66
+ // Start with motor off
67
+ motor.setSpeed(0);
68
+ motor.run(RELEASE);
69
+
70
+ delay(2000);
71
+
72
+ // Clear the display buffer
73
+ lcd.clear();
74
+ // Set cursor (Column, Row)
75
+ lcd.setCursor(0, 0);
76
+ lcd.print("Motor Direction:");
77
+ lcd.setCursor(0, 1);
78
+ lcd.print("Stopped ");
79
+}
80
+
81
+void loop()
82
+{
83
+ // Read the potentiometer value for changing speed as per Analog input
84
+ potValue = analogRead(potPin);
85
+ motorSpeed = map(potValue, 0, 1023, 0, 255);
86
+
87
+ // Read the button states
88
+ forwardButtonState = chkButtonState(forwardButtonPin, LOW, 20);
89
+ reverseButtonState = chkButtonState(reverseButtonPin, LOW, 20);
90
+ stopButtonState = chkButtonState(stopButtonPin, LOW, 20);
91
+
92
+ // check for Forward run
93
+ if (forwardButtonState && (!motorRunning || motorDirection == BACKWARD))
94
+ {
95
+ // Set cursor (Column, Row)
96
+ lcd.setCursor(0, 1);
97
+ lcd.print("Clock ");
98
+ if (motorDirection == BACKWARD)
99
+ {
100
+ motor.setSpeed(0);
101
+ motor.run(RELEASE);
102
+ delay(1000);
103
+ }
104
+ motorRunning = true;
105
+ motorDirection = FORWARD;
106
+ motor.setSpeed(motorSpeed);
107
+ motor.run(FORWARD);
108
+ }
109
+
110
+ // check for Reverse run
111
+ else if (reverseButtonState && (!motorRunning || motorDirection == FORWARD))
112
+ {
113
+ // Set cursor (Column, Row)
114
+ lcd.setCursor(0, 1);
115
+ lcd.print("Anti-Clk");
116
+ if (motorDirection == FORWARD)
117
+ {
118
+ motor.setSpeed(0);
119
+ motor.run(RELEASE);
120
+ delay(1000);
121
+ }
122
+ motorRunning = true;
123
+ motorDirection = BACKWARD;
124
+ motor.setSpeed(motorSpeed);
125
+ motor.run(BACKWARD);
126
+ }
127
+
128
+ // Stop motor
129
+ else if (stopButtonState && motorRunning)
130
+ {
131
+ // Set cursor (Column, Row)
132
+ lcd.setCursor(0, 1);
133
+ lcd.print("Stopped ");
134
+ motorRunning = false;
135
+ motor.setSpeed(0);
136
+ motor.run(RELEASE);
137
+ }
138
+
139
+ // Adjust motor speed if running and display speed on LCD
140
+ if (motorRunning)
141
+ {
142
+ motor.setSpeed(motorSpeed);
143
+ // Set cursor (Column, Row)
144
+ lcd.setCursor(9, 1);
145
+ lcd.print("SPD:");
146
+ lcd.print(((motorSpeed * 100) / 255));
147
+ lcd.print("% ");
148
+ }
149
+}
... ...
\ No newline at end of file
Chip-dat/rohm-dat/BH1750FVI-dat/2025-04-01-12-55-22.png
... ...
Binary files /dev/null and b/Chip-dat/rohm-dat/BH1750FVI-dat/2025-04-01-12-55-22.png differ
Chip-dat/rohm-dat/BH1750FVI-dat/BH1750FVI-ard.ino
... ...
@@ -0,0 +1,66 @@
1
+
2
+/*
3
+ This is a simple code to test BH1750FVI Light senosr
4
+ communicate using I2C Protocol
5
+ this library enable 2 slave device address
6
+ Main address 0x23
7
+ secondary address 0x5C
8
+ connect this sensor as following :
9
+ VCC >>> 3.3V
10
+ SDA >>> A4
11
+ SCL >>> A5
12
+ addr >> A3
13
+ Gnd >>>Gnd
14
+
15
+
16
+*/
17
+
18
+// First define the library :
19
+
20
+#include <BH1750FVI.h> // Sensor Library
21
+#include <Wire.h> // I2C Library
22
+
23
+BH1750FVI LightSensor;
24
+
25
+void setup()
26
+ // put your setup code here, to run once:
27
+ Serial.begin(9600);
28
+ LightSensor.begin();
29
+ /*
30
+ Set the address for this sensor
31
+ you can use 2 different address
32
+ Device_Address_H "0x5C"
33
+ Device_Address_L "0x23"
34
+ you must connect Addr pin to A3 .
35
+ */
36
+ LightSensor.SetAddress(Device_Address_H); // Address 0x5C
37
+ // To adjust the slave on other address , uncomment this line
38
+ // lightMeter.SetAddress(Device_Address_L); //Address 0x5C
39
+ //-----------------------------------------------
40
+ /*
41
+ set the Working Mode for this sensor
42
+ Select the following Mode:
43
+ Continuous_H_resolution_Mode
44
+ Continuous_H_resolution_Mode2
45
+ Continuous_L_resolution_Mode
46
+ OneTime_H_resolution_Mode
47
+ OneTime_H_resolution_Mode2
48
+ OneTime_L_resolution_Mode
49
+
50
+ The data sheet recommanded To use Continuous_H_resolution_Mode
51
+ */
52
+
53
+ LightSensor.SetMode(Continuous_H_resolution_Mode);
54
+
55
+ Serial.println("Running...");
56
+
57
+
58
+void loop()
59
+{
60
+ // put your main code here, to run repeatedly:
61
+ uint16_t lux = LightSensor.GetLightIntensity(); // Get Lux value
62
+ Serial.print("Light: ");
63
+ Serial.print(lux);
64
+ Serial.println(" lux");
65
+ delay(1000);
66
+}
... ...
\ No newline at end of file
Chip-dat/rohm-dat/BH1750FVI-dat/BH1750FVI-dat.md
... ...
@@ -0,0 +1,42 @@
1
+
2
+# BH1750FVI-dat
3
+
4
+Digital 16bit Serial Output Type Ambient Light Sensor IC
5
+
6
+## Specifications
7
+
8
+1) Illuminance to Digital Converter
9
+2) Wide range and High resolution. ( 1 - 65535 lx )
10
+3) Low Current by power down function
11
+4) 50Hz / 60Hz Light noise reject-function
12
+5) I2C bus Interface ( f / s Mode Support )
13
+6) No need any external parts
14
+7) It is possible to select 2 type of I2C slave-address.
15
+8) It is possible to detect min. 0.11 lx, max. 100000 lx by using this function.
16
+
17
+
18
+## Setup
19
+
20
+Supply voltage : prefer to use 3.3 V to communicate with , Not 5V TTL Logic
21
+
22
+I2C Protocol is used to communicate with Microcontroller , with clock SCL Frequency 400KHz .
23
+
24
+
25
+Measurement mode: this sensor has 3 Measurement mode :
26
+
27
+1) H-resolution with Sensitivity 0.5 lux
28
+2) H-Resolution with Sensitivity 1 lux.
29
+3) L-Resolution with Sensitivity 4 lux.
30
+
31
+
32
+
33
+![](2025-04-01-12-55-22.png)
34
+
35
+I2C address == 0x23 or 0x5C
36
+
37
+
38
+## demo code
39
+
40
+https://github.com/Genotronex/BH1750FVI_Master
41
+
42
+- arduino code - [[BH1750FVI-ard.ino]]
Tech-dat/Sensor-dat/light-sensor-dat/ambient-light-sensor-dat.md
... ...
@@ -2,6 +2,10 @@
2 2
# ambient-light-sensor-dat
3 3
4 4
5
-- [[SMO1090-dat]]
5
+- [[SMO1090-dat]] - [[SSL1034-dat]] - [[BH1750FVI-dat]] - [[Ambient-light-sensor]] - [[ambient-light-sensor-dat]] - [[ambient-light-sensor-dat]]
6
+
7
+- [[ambient-light-sensor]]
8
+
9
+
10
+- [[BH1750FVI-dat]]
6 11
7
-- [[ambient-light-sensor]]
... ...
\ No newline at end of file
Tech-dat/acturator-dat/buzzer-dat/buzzer-dat.md
... ...
@@ -0,0 +1,4 @@
1
+
2
+# buzzer-dat
3
+
4
+- [[SSL1019-dat]]
... ...
\ No newline at end of file
Tech-dat/acturator-dat/motor-driver-dat/motor-driver-dat.md
... ...
@@ -9,6 +9,8 @@
9 9
10 10
- [[SDR1090-dat]] - [[SDR1079-dat]] - [[SDR1062-dat]]
11 11
12
+- [[SDR1060-dat]]
13
+
12 14
## chips
13 15
14 16
- [[ti-motor-dat]]
Tech-dat/oscilloscope-dat/oscilloscope-dat.md
... ...
@@ -4,4 +4,13 @@
4 4
5 5
- 196678365
6 6
7
-![](02-58-18-07-03-2023.png)
... ...
\ No newline at end of file
0
+![](02-58-18-07-03-2023.png)
1
+
2
+
3
+## spectrum analyzer
4
+
5
+[Spectrum Analyzer](https://academo.org/demos/virtual-oscilloscope/)
6
+
7
+## Selection
8
+
9
+$299 12bit == https://youtu.be/3hyp0-0ns9U?t=680
... ...
\ No newline at end of file
board-series-dat/arduino-shields-dat/arduino-shields-dat.md
... ...
@@ -1,4 +1,8 @@
1 1
2 2
# arduino-shields-dat
3 3
4
-- [[SCU1090-dat]]
... ...
\ No newline at end of file
0
+- [[SCU1090-dat]]
1
+
2
+motor drive shields
3
+
4
+- [[SDR1060-dat]]
... ...
\ No newline at end of file