service-dat/fab-dat/fab-PCB-dat/PCB-standards-dat/PCB-standards-dat.md
... ...
@@ -43,6 +43,53 @@
43 43
44 44
45 45
46
+
47
+## Manufacturing capability
48
+Please adapte this to your own "DRC(Design Rule Check)" tool, to make sure your board reach the manufacturing limits.<br />
49
+
50
+### Common-Used Design Ruled DRC
51
+
52
+| Name | Min. inch (mm) | Max. | Eagle CAD Default |
53
+| ----------------------------------- | ------------------- | ------------------ | ----------------- |
54
+| Trace Width/Spacing | 6/6 mils (0.15 mm) | - | 10/8 mils |
55
+| Via/Hole Spacing | 6 mils (0.15 mm) | - | 8 mils |
56
+| Drilling hole (vias) | 10 mils (0.25 mm) * | 250 mils (6.35 mm) | Sizes 24 mils |
57
+| Min. stop mask | 4 mils (0.1 mm) | - | Masks 4 mils |
58
+| Min. copper/trace to ground spacing | 8 mils (0.2 mm) | - | 40 mils |
59
+
60
+
61
+### Note
62
+* Minimum milling width of grooves is 0.8mm
63
+* A lot numbers of vias may cost extra
64
+* Dimension: Any irregular shape should be treated as a rectangular, with maximum size.
65
+* Board test:  fully tested by fly probes.
66
+
67
+#### Half-Hole/Impedance
68
+- Half-Hole + $20, if you need this please contact first or write note in order.
69
+- Impedance + $60
70
+
71
+### What do not support
72
+* Four layers boards
73
+* Blind holes (not through holes).
74
+
75
+
76
+
77
+
78
+### Extra PCB Technics
79
+
80
+| Type | Description | Category |
81
+| ---------------------- | ------------------------------------------------------------------------------------------------------------------------------------------- | ---------------------------- |
82
+| Lead free ROHS | free for samples, extra cost for batch production | Soldering Pads Plate Technic |
83
+| ENIG | Gold immersion on pads, better look, better soldering, etc | Soldering Pads Plate Technic |
84
+| Faster PCB in 30 Hours | PCB Manufacturing will be finished in one and half day, not including shipping and handing time. Cost is 42 USD. Can not with ENIG service. | Express PCB |
85
+| Faster PCB in 53 Hours | PCB Manufacturing will be finished in two and half day, not including shipping and handing time. Cost is 21 USD. | Express PCB |
86
+| 2oz copper thickness | Get better heat dissipation for your board, example like A4988 board. | - |
87
+| Board thickness | Free from 0.6 till 1.6 mm, extra cost need for 0.4 and 2.0 mm thickness. (available thickness 0.4 0.6 0.8 1.0 1.2 1.6 2.0) | - |
88
+
89
+
90
+
91
+
92
+
46 93
## ref
47 94
48 95
- [[kicad-dat]]
... ...
\ No newline at end of file
service-dat/fab-dat/fab-PCB-dat/fab-PCB-dat.md
... ...
@@ -2,9 +2,7 @@
2 2
# fab-PCB-dat
3 3
4 4
5
-- [[PCB-fab-dat]]
6
-
7
-
5
+- legacy wiki page - https://w.electrodragon.com/w/Category:PCB
8 6
9 7
## PCB production design
10 8
... ...
@@ -12,58 +10,11 @@
12 10
13 11
## output PCB file
14 12
15
-- [[PCB-output-common-error-dat]] - [[PCB-standards-dat]]
16
-
17
-- [[PCB-format-dat]]
18
-
19
-- [[PCBA-dat]]
20
-
21
-
22
-
23
-## Manufacturing capability
24
-Please adapte this to your own "DRC(Design Rule Check)" tool, to make sure your board reach the manufacturing limits.<br />
25
-
26
-### Common-Used Design Ruled DRC
27
-
28
-| Name | Min. inch (mm) | Max. | Eagle CAD Default |
29
-| ----------------------------------- | ------------------- | ------------------ | ----------------- |
30
-| Trace Width/Spacing | 6/6 mils (0.15 mm) | - | 10/8 mils |
31
-| Via/Hole Spacing | 6 mils (0.15 mm) | - | 8 mils |
32
-| Drilling hole (vias) | 10 mils (0.25 mm) * | 250 mils (6.35 mm) | Sizes 24 mils |
33
-| Min. stop mask | 4 mils (0.1 mm) | - | Masks 4 mils |
34
-| Min. copper/trace to ground spacing | 8 mils (0.2 mm) | - | 40 mils |
35
-
13
+- [[PCB-output-common-error-dat]] - [[PCB-standards-dat]] - [[PCB-format-dat]]
36 14
37
-### Note
38
-* Minimum milling width of grooves is 0.8mm
39
-* A lot numbers of vias may cost extra
40
-* Dimension: Any irregular shape should be treated as a rectangular, with maximum size.
41
-* Board test:  fully tested by fly probes.
42 15
43
-#### Half-Hole/Impedance
44
-- Half-Hole + $20, if you need this please contact first or write note in order.
45
-- Impedance + $60
46 16
47
-### What do not support
48
-* Four layers boards
49
-* Blind holes (not through holes).
50
-
51
-
52
-
53
-
54
-### Extra PCB Technics
55
-
56
-| Type | Description | Category |
57
-| ---------------------- | ------------------------------------------------------------------------------------------------------------------------------------------- | ---------------------------- |
58
-| Lead free ROHS | free for samples, extra cost for batch production | Soldering Pads Plate Technic |
59
-| ENIG | Gold immersion on pads, better look, better soldering, etc | Soldering Pads Plate Technic |
60
-| Faster PCB in 30 Hours | PCB Manufacturing will be finished in one and half day, not including shipping and handing time. Cost is 42 USD. Can not with ENIG service. | Express PCB |
61
-| Faster PCB in 53 Hours | PCB Manufacturing will be finished in two and half day, not including shipping and handing time. Cost is 21 USD. | Express PCB |
62
-| 2oz copper thickness | Get better heat dissipation for your board, example like A4988 board. | - |
63
-| Board thickness | Free from 0.6 till 1.6 mm, extra cost need for 0.4 and 2.0 mm thickness. (available thickness 0.4 0.6 0.8 1.0 1.2 1.6 2.0) | - |
64
-
65
-
66
-### Order Check List
17
+### Order self-Check List
67 18
68 19
- layer: 1, 2, 4, 6, 8
69 20
- Output Type: Single, Continious(As file), Countinious (By our engineer)
... ...
@@ -112,12 +63,8 @@ For 5*5 cm and 10*10 cm sample PCBs, the lead time is 4-6 days that not includin
112 63
== PCB Production Cost List ==
113 64
114 65
115
-
116
-
117 66
## ref
118 67
119
-- [[PCB-penalization-dat]]
120
-- [[PCB-common-error-dat]]
121
-- [[fab-PCB-dat/PCB-fab-dat]]
122
-- [[gerber-tutorial-dat]]
68
+- [[PCBA-dat]]
123 69
70
+- [[fab-PCB-dat]]