Changes in 229c119: nbl

				Board/NBL/NBL1060-dat/NBL1060-dat.md
			
          @@ -0,0 +1,20 @@

          +

          +# NBL1060-dat 

          +

          +

          +## Demo 

          +

          +- https://www.youtube.com/watch?v=Kzks_3-z4E8

          +

          +

          +## Certificate 

          +

          +The product has been certified

          +- FCC certification ID number: 2AM2YJDY-08 (USA)

          +- IC certification ID number: 23040-JDY08 (Australia)

          +

          +## ref 

          +

          +- [[CC2541-dat]]

          +

          +- [[NBL1060]]

          \ No newline at end of file

				Board/NBL/NBL1061-dat/NBL1061-dat.md
			
          @@ -0,0 +1,3 @@

          +

          +# NBL1061-dat 

          +

				Chip/TI/CC1101-DAT/2023-09-05-16-37-37.png
			
          Binary files a/Chip/TI/CC1101-DAT/2023-09-05-16-37-37.png and /dev/null differ

				Chip/TI/CC1101-DAT/2023-09-05-16-37-57.png
			
          Binary files a/Chip/TI/CC1101-DAT/2023-09-05-16-37-57.png and /dev/null differ

				Chip/TI/CC1101-DAT/36-52-17-29-01-2023.png
			
          Binary files a/Chip/TI/CC1101-DAT/36-52-17-29-01-2023.png and /dev/null differ

				Chip/TI/CC1101-DAT/CC1101-DAT.md
			
          @@ -1,44 +0,0 @@

          -

          -

          -# CC1101 DAT

          -

          -

          -Low-Power Sub-1 GHz RF Transceiver 

          -

          -## CC1101 Chip Features 

          -- Work on 433 MHz free ISM RF band, no need license.

          -- Built-in hardware CRC error detection, and address control

          -- The maximum rate of 500kbps (1.2K Min.), support for 2-FSK, GFSK, FSK and MSK modulation, support the transmission channel before the auto-clean-up visits (CCA), the Carrier Sense System, very suitable for using at industrial environment.

          -- Fast frequency changes brought about by a suitable synthesizer frequency hopping system

          -- Most 256 program channels (20M band).

          -- Large data buffer area. Separate 64-byte RX and TX data FIFO

          -- Address can be set up by software, only received local address only when the output data (provided interrupt instruction), can be directly connected using a variety of MCU, very convenient

          -- High sensitivity: 1.2Kbps under-110dBm, 1% packet error rate

          -- Lower current consumption: 20mA averagely in RX mode and 30mA averagely in TX mode, at 10dBm

          -

          -## Board Versions 

          -![](36-52-17-29-01-2023.png)

          -

          -LSS - standard chip only version 

          -- CC1101-LSS: Low Power, SPI interface, Spring Coil - [[NWL1037-DAT]]

          -

          -MSR

          -- CC1101-MSR: Medium Power, SPI interface, rod antenna - [[NWL1044-DAT]]

          -

          -

          -- same board except antenna LUS LUR 

          -- CC1101-LUS: Low Power, UART TLL interface, Spring Coil - [[NWL1042-DAT]]

          -- CC1101-LUR: Low Power, UART TTL interface, rod antenna - [[NWL1039-DAT]]

          -  

          -

          -

          -

          -

          -

          -## ref 

          -

          -- [[CC1101-code]]

          -

          --  legacy wiki - https://w.electrodragon.com/w/CC1101

          -

          -- [[RF-DAT]] - [[RF]]

          \ No newline at end of file

				Chip/TI/CC1101-DAT/CC1101-code.md
			
          @@ -1,33 +0,0 @@

          -# CC1101 code

          -

          -## wiring arduino

          -

          -

          -

          -| CC1101 Pins | func | Arduino Pins | Description                                     |

          -| ----------- | ---- | ------------ | ----------------------------------------------- |

          -| SCK         | SCK  | 13           | Clock Pin                                       |

          -| SI          | MISO | 12           | Data input                                      |

          -| SO          | MOSI | 11           | Data output                                     |

          -| SS          | SS   | 10           | Chip select                                     |

          -| GDO2        | Pin  | 9            | output as a symbol of receiving or sending data |

          -| GDO0        | Pin  | 2            | serial clock output                             |

          -| VCC 3.3/5V  | VCC  | 3.3/5V       | VCC                                             |

          -| GND         | GND  | GND          | Ground                                          |

          -

          -

          -* Connect SPI to arduino SPI pins

          -* Demo code available in documents section below

          -* This is the demo code, you may need to add some delays (delay(3000);) to slow down the serial output

          -

          -

          -![](2023-09-05-16-37-37.png)

          -![](2023-09-05-16-37-57.png)

          -

          -## Library code 

          -

          -

          -* SmartRF - http://www.ti.com/tool/smartrftm-studio 

          -* find the SmartRF tool to adjust the parapmeters of CC1101, such as frequency 433, 915, modulation ask, fsk, etc.

          -* Arduino Support Lib - [[RadioLib]]

          -

				Chip/TI/TI-Network-dat/CC1101-DAT/2023-09-05-16-37-37.png
			
          Binary files /dev/null and b/Chip/TI/TI-Network-dat/CC1101-DAT/2023-09-05-16-37-37.png differ

				Chip/TI/TI-Network-dat/CC1101-DAT/2023-09-05-16-37-57.png
			
          Binary files /dev/null and b/Chip/TI/TI-Network-dat/CC1101-DAT/2023-09-05-16-37-57.png differ

				Chip/TI/TI-Network-dat/CC1101-DAT/36-52-17-29-01-2023.png
			
          Binary files /dev/null and b/Chip/TI/TI-Network-dat/CC1101-DAT/36-52-17-29-01-2023.png differ

				Chip/TI/TI-Network-dat/CC1101-DAT/CC1101-DAT.md
			
          @@ -0,0 +1,44 @@

          +

          +

          +# CC1101 DAT

          +

          +

          +Low-Power Sub-1 GHz RF Transceiver 

          +

          +## CC1101 Chip Features 

          +- Work on 433 MHz free ISM RF band, no need license.

          +- Built-in hardware CRC error detection, and address control

          +- The maximum rate of 500kbps (1.2K Min.), support for 2-FSK, GFSK, FSK and MSK modulation, support the transmission channel before the auto-clean-up visits (CCA), the Carrier Sense System, very suitable for using at industrial environment.

          +- Fast frequency changes brought about by a suitable synthesizer frequency hopping system

          +- Most 256 program channels (20M band).

          +- Large data buffer area. Separate 64-byte RX and TX data FIFO

          +- Address can be set up by software, only received local address only when the output data (provided interrupt instruction), can be directly connected using a variety of MCU, very convenient

          +- High sensitivity: 1.2Kbps under-110dBm, 1% packet error rate

          +- Lower current consumption: 20mA averagely in RX mode and 30mA averagely in TX mode, at 10dBm

          +

          +## Board Versions 

          +![](36-52-17-29-01-2023.png)

          +

          +LSS - standard chip only version 

          +- CC1101-LSS: Low Power, SPI interface, Spring Coil - [[NWL1037-DAT]]

          +

          +MSR

          +- CC1101-MSR: Medium Power, SPI interface, rod antenna - [[NWL1044-DAT]]

          +

          +

          +- same board except antenna LUS LUR 

          +- CC1101-LUS: Low Power, UART TLL interface, Spring Coil - [[NWL1042-DAT]]

          +- CC1101-LUR: Low Power, UART TTL interface, rod antenna - [[NWL1039-DAT]]

          +  

          +

          +

          +

          +

          +

          +## ref 

          +

          +- [[CC1101-code]]

          +

          +-  legacy wiki - https://w.electrodragon.com/w/CC1101

          +

          +- [[RF-DAT]] - [[RF]]

          \ No newline at end of file

				Chip/TI/TI-Network-dat/CC1101-DAT/CC1101-code.md
			
          @@ -0,0 +1,33 @@

          +# CC1101 code

          +

          +## wiring arduino

          +

          +

          +

          +| CC1101 Pins | func | Arduino Pins | Description                                     |

          +| ----------- | ---- | ------------ | ----------------------------------------------- |

          +| SCK         | SCK  | 13           | Clock Pin                                       |

          +| SI          | MISO | 12           | Data input                                      |

          +| SO          | MOSI | 11           | Data output                                     |

          +| SS          | SS   | 10           | Chip select                                     |

          +| GDO2        | Pin  | 9            | output as a symbol of receiving or sending data |

          +| GDO0        | Pin  | 2            | serial clock output                             |

          +| VCC 3.3/5V  | VCC  | 3.3/5V       | VCC                                             |

          +| GND         | GND  | GND          | Ground                                          |

          +

          +

          +* Connect SPI to arduino SPI pins

          +* Demo code available in documents section below

          +* This is the demo code, you may need to add some delays (delay(3000);) to slow down the serial output

          +

          +

          +![](2023-09-05-16-37-37.png)

          +![](2023-09-05-16-37-57.png)

          +

          +## Library code 

          +

          +

          +* SmartRF - http://www.ti.com/tool/smartrftm-studio 

          +* find the SmartRF tool to adjust the parapmeters of CC1101, such as frequency 433, 915, modulation ask, fsk, etc.

          +* Arduino Support Lib - [[RadioLib]]

          +

				Chip/TI/TI-Network-dat/CC2541-dat/CC2541-dat.md
			
          @@ -0,0 +1,26 @@

          +

          +# CC2541-dat 

          +

          +CC2541 is a Bluetooth Low Energy (BLE) System-on-Chip (SoC) developed by Texas Instruments. It is widely used in various applications such as wireless sensor networks, wearable devices, health and fitness devices, and home automation.

          +

          +The CC2541 offers low power consumption and a small form factor, making it suitable for battery-powered and energy-efficient devices. It includes a powerful 8051 microcontroller unit (MCU), along with an integrated Bluetooth radio and a range of peripherals.

          +

          +

          +### DOC 

          +

          +To find more information about CC2541, you can refer to the following links:

          +

          +Texas Instruments CC2541 product page: Link: https://www.ti.com/product/CC2541

          +

          +This page provides an overview of the CC2541, its features, datasheets, and other related resources.

          +

          +

          +CC2541 datasheet: Link: https://www.ti.com/lit/ds/symlink/cc2541.pdf

          +

          +The datasheet contains detailed technical information about the CC2541, including its pinout, electrical characteristics, and programming information.

          +

          +

          +CC2541 software development kit (SDK): Link: https://www.ti.com/tool/ble-stack

          +

          +This SDK provides tools, libraries, and examples to develop applications for the CC2541. It includes the BLE-Stack software, which simplifies Bluetooth Low Energy development.

          +If you have any specific code-rela

          \ No newline at end of file

				Tech/Network-dat/Bluetooth-dat/bluetooth-dat.md
			
          @@ -26,6 +26,8 @@ demo video

           ### BT4.0

          +- [[NBL1060-dat]] - [[NBL1061-dat]]

          +

           ### BT5.0

           ### Bluetooth Mesh

...	...	@@ -0,0 +1,20 @@
	1	+
	2	+# NBL1060-dat
	3	+
	4	+
	5	+## Demo
	6	+
	7	+- https://www.youtube.com/watch?v=Kzks_3-z4E8
	8	+
	9	+
	10	+## Certificate
	11	+
	12	+The product has been certified
	13	+- FCC certification ID number: 2AM2YJDY-08 (USA)
	14	+- IC certification ID number: 23040-JDY08 (Australia)
	15	+
	16	+## ref
	17	+
	18	+- [[CC2541-dat]]
	19	+
	20	+- [[NBL1060]]
...	...	\ No newline at end of file

...	...	@@ -1,44 +0,0 @@
1		-
2		-
3		-# CC1101 DAT
4		-
5		-
6		-Low-Power Sub-1 GHz RF Transceiver
7		-
8		-## CC1101 Chip Features
9		-- Work on 433 MHz free ISM RF band, no need license.
10		-- Built-in hardware CRC error detection, and address control
11		-- The maximum rate of 500kbps (1.2K Min.), support for 2-FSK, GFSK, FSK and MSK modulation, support the transmission channel before the auto-clean-up visits (CCA), the Carrier Sense System, very suitable for using at industrial environment.
12		-- Fast frequency changes brought about by a suitable synthesizer frequency hopping system
13		-- Most 256 program channels (20M band).
14		-- Large data buffer area. Separate 64-byte RX and TX data FIFO
15		-- Address can be set up by software, only received local address only when the output data (provided interrupt instruction), can be directly connected using a variety of MCU, very convenient
16		-- High sensitivity: 1.2Kbps under-110dBm, 1% packet error rate
17		-- Lower current consumption: 20mA averagely in RX mode and 30mA averagely in TX mode, at 10dBm
18		-
19		-## Board Versions
20		-![](36-52-17-29-01-2023.png)
21		-
22		-LSS - standard chip only version
23		-- CC1101-LSS: Low Power, SPI interface, Spring Coil - [[NWL1037-DAT]]
24		-
25		-MSR
26		-- CC1101-MSR: Medium Power, SPI interface, rod antenna - [[NWL1044-DAT]]
27		-
28		-
29		-- same board except antenna LUS LUR
30		-- CC1101-LUS: Low Power, UART TLL interface, Spring Coil - [[NWL1042-DAT]]
31		-- CC1101-LUR: Low Power, UART TTL interface, rod antenna - [[NWL1039-DAT]]
32		-
33		-
34		-
35		-
36		-
37		-
38		-## ref
39		-
40		-- [[CC1101-code]]
41		-
42		-- legacy wiki - https://w.electrodragon.com/w/CC1101
43		-
44		-- [[RF-DAT]] - [[RF]]
...	...	\ No newline at end of file

...	...	@@ -1,33 +0,0 @@
1		-# CC1101 code
2		-
3		-## wiring arduino
4		-
5		-
6		-
7		-\| CC1101 Pins \| func \| Arduino Pins \| Description \|
8		-\| ----------- \| ---- \| ------------ \| ----------------------------------------------- \|
9		-\| SCK \| SCK \| 13 \| Clock Pin \|
10		-\| SI \| MISO \| 12 \| Data input \|
11		-\| SO \| MOSI \| 11 \| Data output \|
12		-\| SS \| SS \| 10 \| Chip select \|
13		-\| GDO2 \| Pin \| 9 \| output as a symbol of receiving or sending data \|
14		-\| GDO0 \| Pin \| 2 \| serial clock output \|
15		-\| VCC 3.3/5V \| VCC \| 3.3/5V \| VCC \|
16		-\| GND \| GND \| GND \| Ground \|
17		-
18		-
19		-* Connect SPI to arduino SPI pins
20		-* Demo code available in documents section below
21		-* This is the demo code, you may need to add some delays (delay(3000);) to slow down the serial output
22		-
23		-
24		-![](2023-09-05-16-37-37.png)
25		-![](2023-09-05-16-37-57.png)
26		-
27		-## Library code
28		-
29		-
30		-* SmartRF - http://www.ti.com/tool/smartrftm-studio
31		-* find the SmartRF tool to adjust the parapmeters of CC1101, such as frequency 433, 915, modulation ask, fsk, etc.
32		-* Arduino Support Lib - [[RadioLib]]
33		-

...	...	@@ -0,0 +1,44 @@
	1	+
	2	+
	3	+# CC1101 DAT
	4	+
	5	+
	6	+Low-Power Sub-1 GHz RF Transceiver
	7	+
	8	+## CC1101 Chip Features
	9	+- Work on 433 MHz free ISM RF band, no need license.
	10	+- Built-in hardware CRC error detection, and address control
	11	+- The maximum rate of 500kbps (1.2K Min.), support for 2-FSK, GFSK, FSK and MSK modulation, support the transmission channel before the auto-clean-up visits (CCA), the Carrier Sense System, very suitable for using at industrial environment.
	12	+- Fast frequency changes brought about by a suitable synthesizer frequency hopping system
	13	+- Most 256 program channels (20M band).
	14	+- Large data buffer area. Separate 64-byte RX and TX data FIFO
	15	+- Address can be set up by software, only received local address only when the output data (provided interrupt instruction), can be directly connected using a variety of MCU, very convenient
	16	+- High sensitivity: 1.2Kbps under-110dBm, 1% packet error rate
	17	+- Lower current consumption: 20mA averagely in RX mode and 30mA averagely in TX mode, at 10dBm
	18	+
	19	+## Board Versions
	20	+![](36-52-17-29-01-2023.png)
	21	+
	22	+LSS - standard chip only version
	23	+- CC1101-LSS: Low Power, SPI interface, Spring Coil - [[NWL1037-DAT]]
	24	+
	25	+MSR
	26	+- CC1101-MSR: Medium Power, SPI interface, rod antenna - [[NWL1044-DAT]]
	27	+
	28	+
	29	+- same board except antenna LUS LUR
	30	+- CC1101-LUS: Low Power, UART TLL interface, Spring Coil - [[NWL1042-DAT]]
	31	+- CC1101-LUR: Low Power, UART TTL interface, rod antenna - [[NWL1039-DAT]]
	32	+
	33	+
	34	+
	35	+
	36	+
	37	+
	38	+## ref
	39	+
	40	+- [[CC1101-code]]
	41	+
	42	+- legacy wiki - https://w.electrodragon.com/w/CC1101
	43	+
	44	+- [[RF-DAT]] - [[RF]]
...	...	\ No newline at end of file

...	...	@@ -0,0 +1,33 @@
	1	+# CC1101 code
	2	+
	3	+## wiring arduino
	4	+
	5	+
	6	+
	7	+\| CC1101 Pins \| func \| Arduino Pins \| Description \|
	8	+\| ----------- \| ---- \| ------------ \| ----------------------------------------------- \|
	9	+\| SCK \| SCK \| 13 \| Clock Pin \|
	10	+\| SI \| MISO \| 12 \| Data input \|
	11	+\| SO \| MOSI \| 11 \| Data output \|
	12	+\| SS \| SS \| 10 \| Chip select \|
	13	+\| GDO2 \| Pin \| 9 \| output as a symbol of receiving or sending data \|
	14	+\| GDO0 \| Pin \| 2 \| serial clock output \|
	15	+\| VCC 3.3/5V \| VCC \| 3.3/5V \| VCC \|
	16	+\| GND \| GND \| GND \| Ground \|
	17	+
	18	+
	19	+* Connect SPI to arduino SPI pins
	20	+* Demo code available in documents section below
	21	+* This is the demo code, you may need to add some delays (delay(3000);) to slow down the serial output
	22	+
	23	+
	24	+![](2023-09-05-16-37-37.png)
	25	+![](2023-09-05-16-37-57.png)
	26	+
	27	+## Library code
	28	+
	29	+
	30	+* SmartRF - http://www.ti.com/tool/smartrftm-studio
	31	+* find the SmartRF tool to adjust the parapmeters of CC1101, such as frequency 433, 915, modulation ask, fsk, etc.
	32	+* Arduino Support Lib - [[RadioLib]]
	33	+

...	...	@@ -0,0 +1,26 @@
	1	+
	2	+# CC2541-dat
	3	+
	4	+CC2541 is a Bluetooth Low Energy (BLE) System-on-Chip (SoC) developed by Texas Instruments. It is widely used in various applications such as wireless sensor networks, wearable devices, health and fitness devices, and home automation.
	5	+
	6	+The CC2541 offers low power consumption and a small form factor, making it suitable for battery-powered and energy-efficient devices. It includes a powerful 8051 microcontroller unit (MCU), along with an integrated Bluetooth radio and a range of peripherals.
	7	+
	8	+
	9	+### DOC
	10	+
	11	+To find more information about CC2541, you can refer to the following links:
	12	+
	13	+Texas Instruments CC2541 product page: Link: https://www.ti.com/product/CC2541
	14	+
	15	+This page provides an overview of the CC2541, its features, datasheets, and other related resources.
	16	+
	17	+
	18	+CC2541 datasheet: Link: https://www.ti.com/lit/ds/symlink/cc2541.pdf
	19	+
	20	+The datasheet contains detailed technical information about the CC2541, including its pinout, electrical characteristics, and programming information.
	21	+
	22	+
	23	+CC2541 software development kit (SDK): Link: https://www.ti.com/tool/ble-stack
	24	+
	25	+This SDK provides tools, libraries, and examples to develop applications for the CC2541. It includes the BLE-Stack software, which simplifies Bluetooth Low Energy development.
	26	+If you have any specific code-rela
...	...	\ No newline at end of file

...	...	@@ -26,6 +26,8 @@ demo video
26	26
27	27	### BT4.0
28	28
	29	+- [[NBL1060-dat]] - [[NBL1061-dat]]
	30	+
29	31	### BT5.0
30	32
31	33	### Bluetooth Mesh