Board/MPC/MPC1073-DAT/MPC1073-DAT.md
... ...
@@ -1,26 +1,12 @@
1 1
2 2
## hardware
3 3
4
+https://www.electrodragon.com/product/rgb-matrix-panel-drive-board-raspberry-pi/
4 5
5 6
## Board Functions
6 7
7
-RTC
8
+- [[RTC-dat]]
8 9
9
-### Batch Design Error
10
-
11
-We have made a batch of board with the design error like below, please check:
12
-
13
-![](56-10-17-12-01-2023.png)
14
-
15
-Dear customer,
16
-
17
-This board indeed has the design error, very sorry for this problem!
18
-
19
-Please advise if we can provide you the new replacement or a refund, we will process as soon as we can. For the replacement option, if you have a new address please let me know instead.
20
-
21
-Thank you!
22
-
23
-Best regards,
24 10
25 11
## software
26 12
Board/MPC/MPC1073-DAT/MPC1073-OS-error.md
... ...
@@ -0,0 +1,6 @@
1
+
2
+# MPC1073 OS error
3
+
4
+Dear customer, RPI4 default system image have flickering issue. Please try to change to DietPi Buster, and please refer to the setup on the attached post link Thanks.
5
+
6
+https://www.electrodragon.com/product/rgb-matrix-panel-drive-board-raspberry-pi/
... ...
\ No newline at end of file
Board/MPC/MPC1073-DAT/MPC1073-design-error.md
... ...
@@ -0,0 +1,27 @@
1
+
2
+# MPC1073 error
3
+
4
+![](35-36-16-10-08-2023.png)
5
+
6
+Blue mark: the wrong vias are on the trace, which cause the error
7
+Green mark: cut the trace on the right green mark first, then add fly wire like this.
8
+
9
+
10
+
11
+
12
+
13
+### Batch Design Error
14
+
15
+We have made a batch of board with the design error like below, please check:
16
+
17
+![](56-10-17-12-01-2023.png)
18
+
19
+Dear customer,
20
+
21
+This board indeed has the design error, very sorry for this problem!
22
+
23
+Please advise if we can provide you the new replacement or a refund, we will process as soon as we can. For the replacement option, if you have a new address please let me know instead.
24
+
25
+Thank you!
26
+
27
+Best regards,
... ...
\ No newline at end of file
Board/MPC/MPC1073-DAT/MPC1073-error.md
... ...
@@ -1,8 +0,0 @@
1
-
2
-# MPC1073 error
3
-
4
-![](35-36-16-10-08-2023.png)
5
-
6
-Blue mark: the wrong vias are on the trace, which cause the error
7
-Green mark: cut the trace on the right green mark first, then add fly wire like this.
8
-