EDS-1.3-dat
| Pin | Name | Function | Description |
|---|---|---|---|
| 1 | GND | Ground of Logic Circuit | This is a ground pin. It acts as a reference for the logic pins. It must be connected to external ground |
| 2 | VCC | Power Supply for Logic | This is a voltage supply pin. It must be connected to external source |
| 3 | SCL | Serial Clock Input | The serial clock input |
| 4 | SDA | Serial Data Input | The serial data input |
| 5 | RES | Power Reset for Controller and Driver | This pin is reset signal input. When the pin is low, initialization of the chip is executed. Keep this pin pull high during normal operation |
| 6 | DC | Data/Command Control | This pin is Data/Command control pin. When the pin is pulled high, the input at SDA is treated as display data. When the pin is pulled low, the input at SDA will be transferred to the command register. |
| 7 | BLK | Backlight Control Pin | When the pin is pulled high turn on backlight, When the pin is pulled low turn off backlight |