mobula8-dat

FPV-dat

Mobula8

1-2S
85mm无刷穿越机
X12飞控 - X12-dat - flight-controller-dat
400mw图传
1103电机
ELRS
400mw VTX, 1103 Motor, ELRS
Packing List & Product Parameters:
- Mobula8 Frame * 1, Brand Name: Happymodel
- EX1103 KV11000 Brushless Motor, Item Name: Mobula8 1-2S 85mm
- Gemfan 2023 Three-blade Propellers (4CW+4CCW), Wheelbase: 85mm
- Caddx ANT 1200TVL Camera, Size: 120mm120mm50mm
- Onboard 5.8G OpenVTX 0mw~400mw VTX * 1, Weight: 43g
- Canopy for 14mmx14mm camera * 1
- Screwdriver * 1
Packing List:
- Mobula8 Frame * 1
- EX1103 KV11000 Brushless Motor
- Gemfan 2023 Three-blade Propellers (4CW+4CCW)

sorted English

Mobula8, this is Happymodel's first attempt on an 85mm frame.
It uses the X12 series flight controller, 1103 KV11000 motors with Gemfan Hurricane 2023 three-blade propellers, providing excellent power and extremely smooth flight.
Features:
- X12 5-in-1 AIO flight controller with built-in 2.4G ELRS V2.0 and OPENVTX.
- VTX power up to 400mw.
- ELRS V2.0 (default), firmware supporting ELRS V3.0 available.
- EX1103 KV110000 motors.
- CaddxFPV Ant FPV camera.
- Smooth and powerful.
- Compatible with 1S-2S Lipo/LIHV batteries.
- Recommended to use 2S 450mah/550mah/650mah batteries (not included).
Specifications:
- Brand Name: Happymodel
- Item Name: Mobula8 1-2S 85mm Micro FPV Whoop Drone
- Wheelbase: 85mm
- Size: 120mm120mm50mm
- Weight: 43g
Receiver Options:
- 2.4G ELRS SPI (supports ELRS v2.0, firmware compatible with ELRS v3.0 available)
- SPI Frsky D8/D16 (not compatible with EMAX E6 radio)
- SPI Flysky AFHDS2A
- PNP (no onboard receiver)
- TBS version (external TBS CRSF NANO RX)
Package Includes:
- Item Name Quantity
- Mobula8 Frame 1
- Option 1: X12 ELRS V2.1 flight controller with built-in SPI ELRS 2.4G receiver
- Option 2: X12 Frsky V2.1 flight controller with built-in SPI Frsky 2.4G receiver
- Option 3: X12 Flysky V1.0 flight controller with built-in SPI Flysky 2.4G receiver
- Option 4: X12 PNP V1.1 flight controller without onboard receiver
- Option 5: X12 PNP V1.1 flight controller with TBS CRSF NANO RX
- EX1103 KV11000 brushless motor
- Gemfan 2023 three-blade propellers (4cw+4ccw)
- Caddx ANT 1200TVL camera
- Onboard 5.8G OpenVTX 0mw~400mw VTX 1
- Canopy for 14mmx14mm camera 1
- Screwdriver 1
Spare Parts Specifications:
- Motor:
  - Model: EX1103 KV11000
  - Configuration: 9N12P
  - Stator Diameter: 11mm
  - Stator Length: 3mm
  - Shaft Diameter: Φ1.5mm
  - Motor Dimensions (Dia.Len): Φ13.5mm15.5mm
  - Weight (g): 3.8g
  - Applicable Battery: 1-2S
- Propeller:
  - Weight: 0.88g
  - Material: PC
  - Pitch: 2.3 inches
  - Prop Dia: 52.17mm
  - Center Thickness: 5mm
  - Center Hole Dia: 1.5mm
- Flight Controller:
  - X12 ELRS V2.1 built-in ELRS 2.4G receiver target: CRAZYBEEF4SX1280
  - X12 Frsky V2.1 flight controller built-in SPI Frsky 2.4G receiver target: CRAZYBEEF4FR
  - X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver target: CRAZYBEEF4FS
  - X12 PNP V1.1 flight controller without onboard receiver target: CRAZYBEEF4DX
  - MCU: STM32F411CEU6 (100MHz, 512K FLASH)
  - Sensor: ICM20689 or ICM42688P (SPI connection)
  - Mounting hole size: 25.5mm*25.5mm
  - Power supply: 1-2S battery input (DC 2.9V-8.7V)
  - Built-in 12A (each) Blheli_S 4in1 ESC
  - Built-in Betaflight OSD (SPI Control)
  - Built-in 5.8G OpenVTX 0mw~400mw
  - Built-in ExpressLRS 2.4G, Frsky D8/D16, Flysky AFHDS 2A
  - Built-in voltage detection
  - Built-in current sensor
- Onboard 4in1 ESC:
  - Power supply: 1-2S LiPo/LiPo HV
  - Current: 12A continuous peak 15A (3 seconds)
  - Supports BLHeliSuite programmable
  - Firmware target: Z_H_30
  - Default protocol: DSHOT300
  - Supports Bluejay firmware
- Onboard SPI ExpressLRS 2.4GHz Receiver:
  - Packet Rate options: 50Hz/150Hz/250Hz/500Hz
  - Firmware version: V2.0
  - RF Frequency: 2.4GHz
  - Antenna: SMD antenna
  - Telemetry output power: <12dBm
  - Receiver protocol: SPI ExpressLRS
  - Compatible with ExpressLRS V2.0 TX module
  - Cannot flash ExpressLRS firmware separately
  - Can flash FC firmware to support ExpressLRS v3.0 TX module
- Onboard SPI Frsky D8/D16 Receiver Version:
  - SPI BUS receiver Frsky D8/D16 compatible
  - Compatible with non-EU transmitter D8/D16 models
  - Channels: 8ch/16ch
- Onboard SPI Flysky Receiver Version:
  - SPI BUS receiver
  - Protocol: AFHDS-2A
  - Channels: 14ch (AFHDS-2A)
  - Failsafe support
- PNP Version (No onboard receiver):
  - External receiver full UART1
  - Supports CRSF/GHOST/SBUS/IBUS/DSMX protocols
  - IR1 pad (inverted RX1) for SBUS input
- External TBS CRSF Nano Receiver Version:
  - Original TBS CROSSFIRE receiver
  - CRSF protocol
  - Official TBS transmitter compatible
- Onboard 5.8g OPENVTX:
  - Firmware version: OPENVTX
  - Smartaudio v2.1
  - PIT mode support
  - RCE mode support
  - Channels: 48ch
  - Transmission power: 0/RCE/25mw/100mw/400mw
  - Power supply: DC 5V
  - Current (5v): <650ma (400mw)
- Caddx ANT 1200TVL Camera:
  - Image Sensor: 1/3" CMOS Sensor
  - Horizontal Resolution: 1200TVL
  - TV System: NTSC or PAL
  - Image: 16:9 or 4:3
  - Synchronization: Internal
  - Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
  - S/N Ratio: >52dB (AGC OFF)
  - Video Output: CVBS
  - Lens: 1.8mm
  - Min. Illumination: [email protected]
  - Auto Gain Control: Yes
  - WDR: Global WDR
  - DNR: 3D DNR
  - Dimensions: 1414mm (with bracket to 1919mm)
  - Wide Power Input: DC 3.7-18V
  - Weight: 2g (N.W.)

raw info

Mobula8,这是Happymodel首次尝试在85mmframe上的尝试采用X12系列飞控，1103KV11000的电机配合GemfanHur ricane2023三叶螺旋桨，动力表现优异，飞行极其顺畅。特点: X125合1AIO飞行控制器内置2.4GELRSV2.0和OPENVTX VTX功率高达400mw ELRSV2.0(默认)，提供支持ELRSV3.0的固件 EX1103KV110000电机 caddxfpv蚂蚁FPV摄像机平稳有力兼容1S-2SLipo/LIHV电池推荐使用2S450mah/550mah/650mah电池(不含）规格：品牌名称:Happymodel 项目名称:Mobula81-2S85mm微型FPVWhoop无人机轴距：85毫米大小:120mm120mm50毫米重量:43克接收机选择： 2.4GELRSSPI(支持ELRSv2.0，提供兼容ELRSv3.O的固件) SPIFrskyD8/D16与EMAXE6无线电不兼容 SPI Flysky AFHDS2A PNP(无板载接收机) TBS版本(外接TBSCRSFNANORX) 包包括：项目名称数量 Mobula8机架1 选项1:X12ELRSV2.1飞行控制器内置SPIELRS2.4G接收器 Option2:X12FrskyV2.1飞行控制器内置SPIFrsky2.4G接收器 Option3:X12FlyskyV1.0飞行控制器内置SPlFlysky2.4G接收器选项4:无机载接收机的X12PNPV1.1飞行控制器选项5:X12PNPV1.1飞行控制器与TBSCRSFNANORX EX1103KV11000无刷电机乾丰2023三叶螺旋桨(4cw+4ccw) caddxANT1200TVL摄像机板载5.8GOpenvtx0mw~400mwvtx1 用于14mmx14mm相机头罩1 螺丝刀1 备件规格：电机模式:EX1103KV11000 Configu-ration: 9 n12p 定子直径：11毫米定子长度：3毫米轴直径:Φ1.5毫米电机尺寸(Dia。。Len):Φ13.5毫米15.5毫米重量(克):3.8g 适用电池:1-2S 螺旋桨重量:0.88g 材料:PC 节距:2.3英寸道具Dia:52.17毫米中心厚度：5毫米中心孔直径：1.5mm 飞行控制器X12ELRSV2.1内置ELRS2.4G接收机目标:CRAZYBE EF4SX1280 X12FrskyV2.1飞行控制器内置SPIFrsky2.4G接收器目标:CRA ZYBEEF4FR X12FlyskyV1.0飞行控制器内置SPIFlysky2.4G接收器目标:CR AZYBEEF4FS 无机载接收机的X12PNPV1.1飞行控制器目标:CRAZYBEEF4DX MCU: Stm32f411ceu6 (100mhz, 512k闪存) 传感器：ICM20689或ICM42688P(SPI连接) 安装孔尺寸：25.5mm25.5mm 电源:1-2S电池输入(直流2.9V-8.7V) 内置12A(每个)BIheli_S4in1ESC 内置betflight OSD(SPI控制) 内置5.8GOpenVTX0mw~400mw 内置ExpressLRS 2.4G,frysky D8/D16,Flysky AFHDS 2A 内置电压检测内置电流传感器板载4in1 esc电源:1-2SLiPo/LiPoHV 电流:12A连续峰值15A(3秒) 支持BLHeliSuite可编程固件目标:Z_H_30 默认协议：DSHOT300 支持蓝鸟固件板载SPIExpressLRS2.4GHz接收器包速率选项:50Hz/150Hz/2 50Hz/500Hz 固件版本:V2.0 射频频率:2.4GHz 天线：SMD天线遥测输出功率:<12dBm 接收协议:SPIExpressLRS 兼容ExpressLRSV2.0 TX模块无法单独flashExpressLRS固件可以flashFC固件支持ExpressLRSv3.0TX模块板载SPIFrskyD8/D16接收器版本SPIBUS接收器FrskyD8/D1 6兼容兼容非欧盟发射机D8/D16型号通道：8ch/16ch 板载SPIFlysky接收器版本SPIBUS接收器协议：AFHDS-2A 通道:14 ch (AFHDS-2A) 失控保护支持 PNP型版本 (无板载接收器)外部接收器满UART1 支持CRSF/GHOST/SBUS/IBUS/DSMX协议 IR1 pad(反向RX1)，用于SBUS输入外部TBSCRSF纳米接收器版本原始TBSCROSSFIRE接收器，C RSF协议，官方TBS发射器兼容板载5.8gOPENVTX固件版本:OPENVTX Smartaudio v2.1 PIT模式支持 RCE模式支持渠道:48ch 发射功率:0/RCE/25mw/100mw/400mw 电源：直流5V 电流(5v):<650ma (400mw) cadxANT1200tvI相机图像传感器：1/3"CMOS传感器水平分辨率:1200TVL 电视系统：NTSC或PAL 图像：16:9或4:3 同步:内部电子快门:PAL:1/50~100,000;NTSC:1/60～100000 信噪比:>52dB(AGC OFF) 视频输出:CVBS 镜头:1.8毫米最小照度:[email protected] 自动增益控制:是的 WDR:Global WDR Dnr: 3d Dnr 尺寸:1414mm(带支架至19*19mm) 宽电源输入:DC3.7-18V 重量:2g (N.W.)

ref

happymodel-dat