raspberry pi dat

hardware

power delivery

In summary, the Raspberry Pi 3 can deliver a maximum of 50 mA to 150 mA from the 3.3V GPIO pins, but care should be taken not to exceed the individual pin limit of 16 mA for each GPIO pin. Always ensure that the total current drawn does not exceed the recommended limits to avoid damaging the board.

3.3V power delivery

All Raspberry Pi since the Model B+ can provide quite a bit more, up to 500mA to remain on the safe side, thanks to a switching regulator.

ref - https://pinout.xyz/pinout/pin1_3v3_power/#:~:text=The%203v3%20supply%20pin%20on,regulator%20for%203.3v%20projects.

chip

BCM2835-dat - BCM2711-dat

Boards and Shields

MPC1029-dat

RPI4

BCM2711B0: cortex-A72

Usage and Software

copy file to /boot/myfiles

To get files across you put the SD into your PC and make a folder (lets say myfiles) on the SD card for your files and put your files in there.

Then, when you plug the SD card back into your RPi, these files are available in a folder called /boot/myfiles.

You can then copy them to anywhere you need on your RPi

or use a USB driver

I2C

turn on I2C functions at raspi-config

demo code

rpi-python-dat - rpi-c-dat
https://github.com/Edragon/RPI

can use commands nohup to run script in background for long term.

repository

display https://github.com/Edragon/RPI_Display
nas - https://github.com/Edragon/RPI_nas
matrix - https://github.com/Edragon/RPI_matrix
RPI prog - https://github.com/Edragon/RPI-PROG
RPI serial - https://github.com/Edragon/RPI-Serial

Competitors

RK3588-dat - rocketchip-dat

RPI-dat