SPI-CMD-dat.md

• raspi-config-dat - RPI-HDK-dat

• lora-HDK-dat

demo code

• Tech-dat/Interface-dat/SPI-dat/spi-cmd-1.py

Uses SPI (spidev)

Resets SX1278

Reads Version register (0x42) to verify communication

Does not transmit RF (safe, non-invasive)

disable CE1

When SPI is enabled:

Kernel configures:

GPIO8 → CE0

GPIO7 → CE1

Disable CE1 in device tree

sudo nano /boot/config.txt

Add: dtoverlay=spi0-1cs

Reboot.

This disables CE1 → GPIO7 becomes free.

✔ Safe to use GPIO7 manually

ref

• spi-dat