wchlink-dat

Note

Keils 识别不到的需要更新 Keil 版本至 5.25 以上

模式	指示灯	IDE	支持芯片
RISC-V	空闲时蓝灯常灭	MounRiver Studio	本公司支持两线调试接口的 RISC-V 核芯片
ARM	空闲时蓝灯常亮	Keil	支持 SWD 协议的 ARM 核芯片

Mode switching:

When Tx is connected to GND, plug the WCH-Link into the USB interface to switch the mode and keep it in this mode the next time it is plugged into the USB interface.
Example:
When the current WCH-Link is idle, the blue light is always off, indicating that it is in RISC-V mode; after powering off, short-circuit Tx and GND and plug it into the USB interface, and the mode is switched to ARM. At this time, the blue light is always on when idle; Turn on Tx and GND, and it will still be in ARM mode the next time you plug in the USB interface.