PAM8403-dat

SCH

Design Notes PAM8403

• Two ends of C32 and C34 must connect over PVDD and PGND.
• To prevent to noises to speaker:
  
  • Pin 3 and Pin 14 should go under the IC to the speaker
  • Pin 4 and Pin 13 should NOT go under the IC to the speaker
  • Pin 2 and Pin 15 should NOT go under the IC to the speaker
• Pin 6 VDD should separated with PVDD, pass C36 cap and after relatively long distance, and finally connect to VCC pin from two trace lines (to make this distance).
• Not recommended to use single layer board.
• circuits in the dot line box is optional.

ref

• Chip-dat/Diodes-dat/PAM-dat/PAM8403-dat/PAM8403.pdf