IP5306-dat
-
DS: https://www.laskakit.cz/user/related_files/ip5306.pdf
Press button
Push button’s connecting is shown in Fig 5. IP5306 can identify long push and short push.
| Button Action In | System Action Out |
|---|---|
| If button is pushed longer than 30ms but shorter than 2s, IP5306 will identify the action as short push. | Short push will open SOC indicator LEDs and step-up converter |
| If button is pushed longer than 2s, IP5306 will identify the action as long push. | Long push will close step-up convertor, SOC indicator LED and flashlight LED. |
| If button is pushed shorter than 30ms | IP5306 will ignore the action. |
| If two short push is detected within 1s | IP5306 will open or close flashlight LED |
Typical SCH
Note
Make sure
- use high quality, full charged battery for testing, otherwise could cause power off
- to prevent board enter into sleep mode automatically for small power load, you can add some more load resistors to keep it continuously on.