NWI1126-DAT
Pin Definitions
#define OM_LED 10 // on module led
#define WS_LED 9 // WS2812, select by jumper
#define addc 0
#define W_LED 4 // white
#define B_LED 5 // blue
#define G_LED 6 // green
#define R_LED 7 //red
- IO9 button = program mode pin
- EN button = reset pin
- programmable LED pin 10
quick test
- find demo code at https://github.com/Edragon/Arduino-ESP32
- find your board IP address, verify it in browser: http://192.168.8.165
- try the test commands to turn off on board prog LED: http://192.168.8.165/io/10/val/0
- in which, IO is 10 and IO voltage level is 0
demo video
- https://twitter.com/electro_phoenix/status/1610204098019880961
Note
- ESP32-USB failed on code testing, may work or not, consider it is not working if you buy.