NWI1126-DAT

#define OM_LED 10 // on module led
#define WS_LED 9 // WS2812, select by jumper 

#define addc 0

#define W_LED 4 // white
#define B_LED 5 // blue
#define G_LED 6 // green
#define R_LED 7 //red

quick test

• find demo code at https://github.com/Edragon/Arduino-ESP32
• find your board IP address, verify it in browser: http://192.168.8.165
• try the test commands to turn off on board prog LED: http://192.168.8.165/io/10/val/0
• in which, IO is 10 and IO voltage level is 0

Size Dimension Pin Definitions

• IO9 button = program mode pin
• EN button = reset pin
• programmable LED pin 10

demo video

• https://twitter.com/electro_phoenix/status/1610204098019880961

Note

• ESP32-USB failed on code testing, may work or not, consider it is not working if you buy.

ref

• NWI1124-DAT
• NWI1125-DAT
• NWI1126