Pins map
Software PulseView
Note
- detection TTL on low
- pull-up resistors should not be too strong in case it can not be pull to low
- low TTL has to be 0.7V below to detect
ref
- demo video - http://www.saleae.com/logic/videos
- download software - http://www.saleae.com/downloads
- opensource pulseview - https://www.sigrok.org/wiki/Downloads
- pulseview guide - https://sigrok.org/wiki/Windows#Drivers
- Please find in our bitbucket folder -> git clone https://github.com/Edragon/logic-analyzer.git
demo
-
setup guide - https://www.youtube.com/shorts/aOFLWS1JEIU