MPC1073-multiplexing-dat
- E-Line buffer to either PIN4 or PIN8, refer to the image
| pin | mode 1 | mode 2 | mode 3 (set this) |
|---|---|---|---|
| 4 | GND | E | GND |
| 8 | GND | GND | E |
- Check if your panel is oversize (64x64 is needed) or chained with multiple panels, then you need to setup the E-line
- The normal setup is P4 + GND, and P8 + #E
how problem looks like - video here: https://fb.watch/c7KIaWjqIr/ (facebook dead)
represent problem
- read how to configure below at page MPC1073-test-log-dat
on 64x32 panel:
problem show up
multiplexing fixed
on 64x64 panel:
further support
If you still have problems, please try the default demo:
/rpi-rgb-led-matrix# ./examples-api-use/demo -D 0 --led-cols=64 --led-rows=32 --led-multiplexing=0
And provide demo images to info@electrodragon.com to check.