IDD1002-dat
Board Layout
CC Current calculation
Resistor | value |
---|---|
R1 | 0.5R |
R2 | 0.5R |
R3 | 0.33R |
R4 | nc |
Rs = 0.142241 R
Breakout board support up to
- 1W, 10W, 30W high power LEDs in our store
- also can shortly or not fully power 50W or 100W LEDs. 33V for 100W LEDs can work but not recommdedded for long term.
- Tested 5 Meters LED white strips.
- Pin Definition:
- IN +: Positive power supply IN-: Power supply negative.
- LED +: Connect the LED’s anode LED-: Connect the LED’s cathode
- PWM: Light Strengh control: dimming control signal (2.8V-6V turn on)
- PWM signal limit frequency: 20HZ-20KHZ, recommendations: 1KHZ or so
-
Each purchase is for 2 pieces boards.
- read more information on this page PT4115-dat